User manual MAGELLAN NAV DLX10

[. . . ] The map CTR key is used to display the map screen from any screen and centers the map on the last computed position. The map screen and many of the function screens contain a help bar, located directly above the NAV window, which tells you the action or actions you may perform on the current screen. The Nav 6000 offers five different languages: Spanish, German, French, Italian, and English. How do I power on my Nav 6000? Answer: 2 Question: Answer: 4 Question: Answer: 5 Question: Answer: 6 Question: Answer: 7 Question: Answer: 8 Question: Answer: 9 Question: Answer: 10 Question: Press the power key until the "Magellan Nav 6000" screen is displayed (takes approximately five seconds). [. . . ] A line appears on the map, connecting the first point to the second, and so on. To add to the route a cursor position that is not an existing waypoint, press enter at the cursor position and the mark cursor position window appears; make the necessary edits and press done to accept Adding the new waypoint to the route. Continue to add waypoints to the route until you have completed it, and then press the done softkey. (See Editing Routes) How do I create a multi-leg route manually in my Nav 6000?The create route screen appears showing the number of the first available route in the screen header, "create route X". In the center window is a table where you enter waypoints to form the legs of the route. The highlight appears in the first field of the first leg in the route. When a route is created, the table shows leg numbers, waypoint names, bearing, and distance. Use the cursor key to highlight the route you wish to reverse and press the revers softkey. Use the cursor key to highlight the route in which you wish to insert a waypoint and press enter. Use the cursor key to move the cursor close to the course line near the point you wish to insert a waypoint in the route. If the waypoint being moved is at the start of the route, as you move the cursor key, the distance and bearing from the cursor to the next waypoint are updated continuously. If the waypoint being moved is in the middle or at the end of a route, the bearing and distance shown is from the previous waypoint to the cursor position. Waypoints are movable, whether or not they are contained in an active route. How do I replace a waypoint in a route manually on my Nav Answer: 43 Question: Answer: 44 Question: Answer: 45 Question: Answer: 6000?From any root screen, press the routes, list and use the cursor key to select the route in which you wish to replace a waypoint. Use the cursor key to highlight the waypoint you wish to replace and press enter. Select the waypoint you wish to use to replace the one you highlighted and press enter. The waypoint you select in the waypoint list replaces the one you highlighted in the route. From any root screen, press the routes, list and use the cursor key to select the route in which you wish to activate a leg. Press enter, manual then use the cursor key to highlight the destination waypoint of the leg you wish to activate in the route. Activating a leg of an inactive route automatically activates the route itself. [. . . ] Press the menu softkey, use the cursor key to highlight map setup and press enter. Use the cursor key to highlight map configuration, press enter, highlight chart settings and press enter. Use the cursor key to select the feature you wish to activate or deactivate and press enter. Default setting: on (except plot mode) The info level can be set to basic or detailed. [. . . ]