User manual MAGELLAN MAP 330

[. . . ] User Manual MAP 330/MAP 330M This User Manual provides the instructions for using the Magellan MAP 330 and the Magellan MAP 330M GPS receivers. Any reference to the MAP 330 in this User Manual applies to both receivers. Those areas that apply only to the MAP 330M will be noted. WARNINGS FOR SAFETY REASONS, THE DRIVER SHOULD NOT USE THIS DEVICE IN A VEHICLE WHILE IN MOTION TO ASSIST THE DRIVER TO NAVIGATE. Please do not try and change any settings on the MAP 330 while driving. [. . . ] Using the Display Backlight -- Illuminates the display for easier viewing in dark surroundings. Use only as needed as the backlight causes a large drain on the batteries. An automatic timer will turn the backlight off when Button Sequence a button has not been pressed for a 1st Press Light On (low) selected duration (see Setup). 2nd Press 3rd Press Light On (high) Light Off Press and hold for 2 seconds Magellan MAP 330 GPS Receiver 23 Reference Adjusting the Display Contrast -- Sets the contrast of the display for easy viewing in most lighting conditions. From Any Screen MENU Highlight Contrast ENTER ENTER Adjust Contrast Level Selecting NAV Screens -- The NAV button provides a means of accessing the navigation screens. (Note: the sequence displayed is when all five navigation screens are turned on. Screens turned off in Setup will not be displayed. ) Navigation Screen Sequence Map Screen Compass Screen Large Data Screen Position Screen Sat Status Screen ESC NAV Returning to Last Viewed NAV Screen -- Pressing the NAV button returns the MAP 330 to the last NAV Screen viewed. NAV (Note: if the NAV screen is pressed from a screen where data is being input, the data will not be saved. ) The Map screen is the very heart of the MAP 330. In the Position Mode, the map is centered around your present position with an arrow cursor indicating your position and points in the direction you are heading. Two customizable data fields are presented at the bottom of the display. If you require to see more of the map you can also turn off these data fields. Information as to how to customize this screen follows this brief description of the Map screen. 24 Magellan MAP 330 GPS Receiver Reference Present Position Icon Track History Map Scale Indicator Data Fields Present Position Icon The Present Position Icon graphically displays your position on the map. If the MAP 330 is not computing positions, this icon is replaced with an hourglass icon. The number displayed represents approximately 1/4 of the screen's width. Track History Dotted line on the map displays the history of where you have travelled since the last time you cleared the Track History (see Clear Memory in the Reference Chapter. ) Data Fields These fields display navigational information for viewing on the Map screen. Both of the data fields can be turned on or off allowing more viewable map area. Both features (customize and turning the data on/off) can be accessed from the MENU button. Optionally, using the customize function, the data fields can be replaced with the name of the street or intersection you are presently on. Position Mode Magellan MAP 330 GPS Receiver 25 Reference In the Cursor Mode, you are provided with a cursor that can be moved on the map. At the bottom of the display is the information for the position of the cursor relative to your present position. The cursor will disappear and the present position icon will appear centered on the map. Cursor Icon Map Scale Indicator Cursor Information Block Waypoint or Map Object Name Cursor Icon The Cursor Icon pinpoints the location you have selected by using the arrow keys. The number displayed represents approximately 1/4 of the screen's width. Scale can be changed with the IN and OUT buttons. Waypoint or Map Object Name Whenever the cursor is over a map object, the name of the map object is displayed, otherwise the word "cursor" appears. The data shown in the information block is the heading and distance from your present position to the cursor. Cursor Mode 26 Magellan MAP 330 GPS Receiver Reference Setting the Map Detail -- The detail of the map can be set to highest, high, medium, low or lowest. This changes the zoom level that different map objects (cities, highways, labels, etc. ) are displayed. If you have set a zoom level and the display is too cluttered, set the map detail to a lower level; conversely set it to a higher level to view more detail. [. . . ] Caution: Do not bypass the power supply box or you will damage your unit and void the warranty. Mounting Hole Power Plug Cut Here Cigarette Lighter Adapter - + Power Supply Box 9-pin Connector Connecting to a Data Source Data Connection Pinout (PC and Data cables only) This is the pinout looking into the 9-pin female connector Pin 2: Data Out Pin 3: Data In Pin 5: Ground 5 9 1 6 Cable Wiring Color Code Power Red: Power + Black: GND Data (Power/Data, PC cable & Data cable only) Yellow: Data In Orange: Data Out Black: GND 74 Magellan MAP 330 GPS Receiver Appendix Active Leg Altitude BRG Buoy The segment of a route currently being traveled. The compass direction from your position to a destination, measured to the nearest degree. A navigation aid (usually found in marine charts) that is floating in water. The position can vary due to the magnitude and direction of the current. [. . . ]