User manual MAGELLAN MAESTRO 4000

[. . . ] Magellan® MaestroTM 4000 User Manual Magellan Navigation, Inc. 960 Overland Court, San Dimas, CA 91773 IMPORTANT SAFETY WARNINGS The Magellan Maestro is a vehicle-navigation aid designed to assist you in arriving to your selected destinations. When using the Magellan Maestro, these safety rules must be followed to prevent accidents that can result in injury or death to yourself or others: · California and Minnesota law prohibits mounting any item to your windshield. Please check with your state or local law enforcement for applicable regulations regarding windshield mounting. [. . . ] The Current Location screen displays approximate address information, the next and previous cross streets, as well as your latitude/longitude. To the right is a compass point in your direction of travel, calculated elevation, and speed. The bottom bar displays the current time and date. Accessing the Current Location Screen 1. From the Map screen, tap the direction icon in the upper left corner. Saving Your Current Location to Your Address Book 1. Tap Edit Information: Tap on the Edit Name line to create a name for this location. Tap on any of the three (work, home, mobile) phone buttons to enter a phone number. (Up to 35 characters can be entered. ) Saving Current Location 4. 5. If you want to tag this location as one of your favorites, tap on the "Favorite" check box. When the details for this address are acceptable, tap . Map Screen 14 Maneuver List Screen This screen is accessed from the Map screen and only when routing. (Note: The Maneuver List screen is not available until you begin moving on the route. ) Each line in the maneuver list provides details about the maneuver in the order that they are to be made, with the next maneuver at the top. The bottom bar of the Maneuver List indicates the distance and time to the next maneuver as well as the total distance computed for the route. The Maneuver List can be modified if you want to exclude one of the maneuvers should you want to avoid travelling one of the streets listed. Instructions to exclude one of the maneuvers is described in this chapter. Maneuver List The maneuver highlighted indicates that you will be instructed to make a right turn in 0. 5 miles on N. This icon is displayed only while on an active route. Excluding a Maneuver This is used to modify the route to possibly avoid routing on a particular street. Tap on the item in the list with the street you want to try and avoid. (Tap the back arrow to cancel. ) The Magellan Maestro recalculates the route and displays the Maneuver List with the newly computed maneuvers. In this example, Exit-45/Santa Ana/CA-57 is to be excluded from the route. 4. The Maneuver List displays the new route. Map Screen 15 GPS Status Screen 1. The GPS Status screen is also accessed from the Map screen and displays the status of the GPS satellites in a graphical format. (More technical information on the GPS status can be found in under the User Options menu: Main Menu Page 2 > User Options > GPS Options > GPS Status. ) Green bars indicate that the Magellan Maestro is using these satellites to compute the position; orange bars indicate that the Magellan Maestro is trying to lock on to the satellite signal; and no bar shown indicates a satellite that is not being tracked. The longer the bars, the better the signal. GPS Status Screen Accessing the GPS Status Screen 1. From the Map screen, tap the GPS Signal Strength icon in the upper right corner. Tap on the back arrow to return to the Map screen. Zoom Levels There are 23 zoom levels in the Magellan Maestro, ranging from 100 feet to 1200 miles. Select the zoom level that best suits your needs. Setting Zoom Levels 1. [. . . ] From the Menu Screen select User Options > Map Options > uncheck the Auto Night Mode box to retain the default map at all times. Please be aware the receiver has to be locked onto satellites to determine the correct map mode. Answer: The receiver's time can be adjusted in the System Settings. From the Menu Screen select User Options > select System Settings > select Time Zone > select the + or ­ button to choose the correct Time Zone for your area. [. . . ]