User manual MAGELLAN GPS 2000 XL

[. . . ] Certain conditions can make the system less accurate. No part of this User Guide may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose other than the purchaser's personal use, without the written permission of Magellan Systems Corporation. MagellanTM and GPS Blazer12TM are the trademarks of Magellan Systems Corporation. PN: 630288 B TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Welcome to the Magellan GPS Blazer12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To view the POSITION screen of the selected landmark, press the UP ARROW. 15 Editing a Landmark Following the instructions under Viewing a Landmark, use the LEFT/RIGHT arrows to select the landmark you wish to edit. Press the UP ARROW until the screen displays PRESS ENT TO EDIT, then press ENTER . You can modify the landmark name and/or the coordinates for the landmark by using the UP/DOWN arrows to change the information and press ENTER to move to the next line. If the landmark you are editing is used in a route, the route will be modified to reflect the changes you made to the landmark. Deleting a Landmark Following the instructions under Viewing a Landmark, use the LEFT/RIGHT arrows to select the landmark you wish to delete. Press the UP ARROW until the screen displays PRESS ENT TO DELETE, then press ENTER . If the landmark is used in a route or is the destination landmark in a GOTO route, the GPS Blazer12 alerts you that the landmark cannot be deleted. Remove the landmark from the route and repeat. 16 Working with Routes The route function allows you to link a series of landmarks and travel, point by point, to a final destination. B A Leg 1 Leg 2 D Le g 3 C The route depicted here is a three-leg route. Leg 1 extends from landmark A to landmark B, leg 2 from landmark B to landmark C, and leg 3 from C to D. The GPS Blazer12 gives you information on the NAV screens that directs you to the destination of each leg sequentially. Creating a Route A route can contain up to 10 legs using any of the landmarks stored in memory. If there is a route already in memory you must delete the existing route before you can create a new one. Access the Route Menu by pressing MENU until ROUTE appears at the top of the screen. While still viewing the Route Summary screen, press the UP ARROW until the display indicates PRESS ENT TO ADDLEG. As in creating a route, use the ARROW pad to select the new landmark for this leg. The process of adding a leg continues until you select END ROUTE or the route is full. 21 Activating a Leg in a Route As you are navigating you may decide that you no longer wish to continue on the leg that you are now using. You will need to activate the leg of the route with the desired destination (TO landmark). Use the LEFT/RIGHT ARROWs until the leg you wish to activate is displayed. The leg has become activated, the NAV screen is displayed, and the receiver begins to compute the necessary information to continue you on the route using the leg you selected. If the display indicates ENT TO DEACTVATE, it means that the receiver is using this leg to compute the navigational information. Pressing ENTER at this screen not only deactivates the leg and returns to the leg summary screen, but deactivates the route as well. 22 Editing a Leg in a Route Press Press until ROUTE appears at the top of the display. Use the LEFT/RIGHT ARROWs until the leg MENU you wish to edit is displayed. Press the UP ARROW until PRESS ENT TO EDIT is displayed and press ENTER . Use the LEFT/RIGHT ARROWs to select a new FROM landmark and press ENTER . [. . . ] Carrying Case: Protects your GPS Blazer12 from the elements and allows you to carry your GPS Blazer12 on your belt, keeping it handy for when you need it. Mounting Bracket: Mounts on a dashboard or other surface allowing you hands-free operation of your GPS Blazer12. Allows the use of the External Power Cable while the receiver is resting in the bracket putting your GPS Blazer12 where you want it and always ready to use. External Power Cable: Connects your GPS Blazer12 to a cigarette lighter allowing uninterrupted use without any drain on your batteries. [. . . ]