User manual MAGELLAN EXPLORIST 600

[. . . ] Magellan eXplorist 600 Reference Manual Topics: · · · · · · · · · · · · · · · · · eXplorist 600 GPS Receiver Using the eXplorist 600 Starting Up Navigation Screens File Structure Points of Interest Routes Track Logs Weather Electronic Compass Advanced Features Magellan Geocache Manager Using MapSend Preferences Specifications Accessories Contacting Magellan Support *** Warnings *** IN THE INTEREST OF SAFETY, DO NOT USE THIS NAVIGATION DEVICE WHILE DRIVING A VEHICLE. Please do not try to change any settings on the Magellan® eXploristTM while driving. Taking your eyes off the road is dangerous and can result in an accident in which you or others could be injured. USE GOOD JUDGMENT This product is an excellent navigation aid, but it does not replace the need for careful orienteering and good judgment. Never rely solely on one device for navigating. USE CARE The Global Positioning System (GPS) is operated by the U. S. Government, which is solely responsible for the accuracy and maintenance of the GPS network. [. . . ] Press ENTER. List of routes with route named "Magellan" active. Press MENU. 5. 9. You will be returned to the last viewed navigation screen with the route chosen activated or deactivated. Routes Changing the Destination Leg of an Active Route 51 When a route is created it can have many different legs to it, each leg with its own destination. If during your travels you want to skip some of the legs, you can select the leg that you want to proceed to next. To finish out the route, the final leg goes from the ranger station to the swimming area. This route would be Camp > Bridge > Marker > Ranger > Swim. Suppose that after crossing the bridge you don't want to go to the stone marker but instead you want to go to the ranger station. Because the route is active (you can select legs only from active routes), you would follow the instructions below and tell the eXplorist to set the next leg to the ranger station. The route would be recomputed, eliminating the navigation instructions to go to the stone marker. Locate the file that contains the route you want to activate or deactivate. eXplorist will automatically open the default file. ) With the file highlighted press ENTER. Use the Arrow joystick to highlight the next destination POI from the route list that you want to go to. In the example to Route leg list with Ranger the right, that would be Ranger. Confirm that you want to do this by using the Arrow joystick to highlight Yes. Press NAV to return to the last viewed navigation screen. Marker is bold because it is the current active leg. Routes Editing a Saved Route 52 Saved routes can be edited to add a new leg at the end of the route (Add POI), remove a leg (Delete POI), insert a new leg (Insert POI), or change the destination from one POI to another (Replace POI). automatically open the default file. ) With the file highlighted press ENTER. Inserting: Use the Arrow joystick to highlight the POI that you want to a new leg inserted in front of. Deleting: Use the Arrow joystick to highlight the POI you want to delete from the route. Replacing: Use the Arrow joystick to highlight the POI you want to replace. The POI you select will replace the POI that was originally highlighted. Press ENTER. 11. When the route has been edited, use the Arrow joystick to highlight Save Route. [Optional] Use the Arrow joystick and the ENTER button to input a name, up to ten characters, for the route. 15. Press ENTER. Routes Reversing a Route 53 Reversing a route takes a saved route and recreates it in reverse order. [. . . ] With the Done button highlighted, press ENTER. Preferences Setting Daylight Savings Time 1. If Custom: You need to enter the information about the start and end dates for daylight savings. Select one of the options from each of the popup menus and press ENTER. When all of the information has been entered and is correct, press ESC to return to the Clock screen. Specifications Performance Receiver Antenna 112 14 parallel-channel technology, tracks up to 14 satellites to compute and update information. [. . . ]