User manual MACKIE MR5SW QUICK START

[. . . ] MONITOR MR5S/MR5SW Compact Two-Way Speaker Quick-Start Guide The MR5S (Black) and MR5SW (White) are a compact two-way speaker system designed for constant-impedance systems. The 5" carbon fiber woofer, in combination with a 0. 75" soft dome tweeter mounted on a 105° x 105° constant directivity horn, provide natural, smooth sound reproduction, ideal for use in business music systems and indoor/outdoor background music applications. [. . . ] Technical service ­ The user should never attempt to make any repairs on this Mackie Industrial product unless otherwise indicated in the instruction manual. Installation ­ Do not install this Mackie Industrial product in any way that is not provided for in the instruction manual. Stacking multiple units ­ To prevent the danger of falling equipment, never stack multiple units of this Mackie Industrial product unless this possibility is expressly indicated in the instructions. Respect the safety standards ­ The entire sound system must be designed in compliance with the current standards and laws regarding electrical systems. 8. Specifications ­ When installing and using this Mackie Industrial product, keep in mind the technical specifications indicated in the dedicated section of the manual. Accessories ­ Install and use this Mackie Industrial product only with the accessories specified by the manufacturer or supplied with the product. Hearing loss - Exposure to high sound levels can cause permanent hearing loss. The sound pressure level which leads to hearing loss varies considerably from one person to another, and depends on the duration of exposure. Government's Occupational Safety and Healt Administration (OSHA) has established the maximum sound pressure levels that can be with stood without causing damage, which are shown in the table below. According to the OSHA regulations, any exposure over the maximum limits indicated in the table can reduce the hearing capacity of a person. To prevent potentially dangerous exposure to high sound pressure levels, anyone subjected to such levels must use suitable protection. When a Mackie Industrial product capable of producing high sound levels is being used, it is therefore necessary to wear ear plugs or protective earphones when the limits shown in the table are exceeded. Consult the specifications provided in the instruction manual to know the maximum sound pressure (SPL) the speaker is capable of producing. Duration per day (hours) 8 6 4 3 2 1. 5 1 0. 5 0. 25 or less Sound level (dBA) 90 92 95 97 100 102 105 110 115 Typical example Duo in a small club Subway train Very loud classical music Locomotive at 50 feet Loudest parts at a rock concert 2 MONITOR 5S POWER CAPACITY 175W NOMINAL IMPEDANCE 4 CONCEIVED, DESIGNED, AND MANUFACTURED BY MACKIE INDUSTRIAL MADE IN ITALY · COPYRIGHT ©1999 THE FOLLOWING ARE TRADEMARKS AND REGISTERED TRADEMARKS OF MACKIE DESIGN INC. : "MACKIE" , "MACKIE INDUSTRIAL" & THE "RUNNING MAN" FIGURE , Hookup OUTPUTS + L ­ + R ­ POWER AMPLIFIER SERIAL NO. ­ + ­ + 4 Ohm Stereo Connection 3 Rear Panel Features 1. Use these gold-plated banana jacks to connect the speaker wiring. Installation The MONITOR MR5S can be mounted using the optional mounting brackets. [. . . ] Coverage Angle (­6 dB): 105°, averaged 800Hz-16kHz Directivity Factor Q (DI): 6. 3 (8. 0), averaged 800Hz-16kHz System Sensitivity 1: 87 dB, 1W@1m Rated Maximum SPL: 112 dB @ 1 m (3. 3 ft) peak Rated Nominal Impedance: 4 (bypassed) System Input Power Rating 2: 175W IEC, 700W Peak Recommended Amplifier 3: 250W HF Protection: Dynamic Crossover Frequency: 2. 5kHz, 12 dB/octave Physical: Enclosure: 45° back angles, high density polystyrene Attachment Inserts: 4 integrated threaded insert points Color: Grille: Matte black (MR5S) White (MR5SW) Matching perforated steel grille Input Connectors: Gold-plated banana terminals Dimensions HxWxD: 10. 32 in x 7. 17 in x 6. 57 in (262 mm x 182 mm x 167 mm) Net Weight: 8. 6 lb (3. 9 kg) Options: MA3-5 (MA3-5W): Articulated surface mount hardware, Black (White) MA5-6: MA5-7: Plate for suspending 4 clustered speakers, Black Speaker tilt bracket for MA5-6, Black MA5-9 (MA5-9W): U-bracket, Black (White) MA-7B (MA-7W): Wall-mount support bracket, Black (White) Transducers: Low Frequency: 5" (130 mm) carbon fiber woofer with 1" (25mm) coil High Frequency: 0. 75" (19 mm) horn-loaded dome tweeter, Ferrofluid® cooled 1 Measured on-axis in the far field with 1 watt (2. 00V RMS @ 4 ) input and referenced to 1 meter distance using the inverse square law. Listed sound pressure represents an average from 300Hz to 3kHz. 2 IEC Spectrum, peak for 2 hours with +4. 5 dB crest factor. 3 Recommended Amplifier is a power capability value that should be taken as a guide. 5 www. mackieindustrial. com 16220 Wood-Red Road NE, Woodinville, WA 98072 USA TEL 888. 337. 7404, FAX 425. 487. 4337, industrial@mackie. com UK +44. 1268. 571. 212, FAX +44. 1268. 570. 809 +industrial@rcf-uk. com ITALY +39. 0522. 354. 111, FAX +39. 0522. 926. 208 +industrial@rcf. it FRANCE +33. 3. 8546. 9160, FAX +33. 3. 8546. 9161 +rcf. commercial@wanadoo. fr GERMANY +49. 2572. 96042. 0, FAX +49. 2572. 96042. 10 +industrial@mackie. de Part No. [. . . ]