User manual MACKIE D8BKEYS

[. . . ] [. . . ] Controls EQ frequency (horizontal) and gain (vertical) Controls Q (horizontal) and gain (vertical) Opens Fat Channel display for the next (->) or previous (<-) channel Jump to that point Set time ­ drag up/down, click at top or bottom, or direct entry from keyboard to change time Toggle automation off (Bypass) or on Rename the cue Select time to display in SMPTE, BBT, or Milliseconds Sets console to conditions in snapshot Opens Filter dialog box, allowing selection of functions which will be unaffected by that snapshot. Enter text description of snapshot Click in fader motion path Click C (Compressor), G (Gate), Ö (Polarity) or EQ (Equalization) channel buttons Shift + Click SELECT Shift + click Double-click Title Bar on a floating window Fat Channel Screen Click + drag in EQ window Right-click + drag in EQ window Click arrows surrounding the channel number Locator Window Double-click Cue point Click in Time display Click BYPASS Double-click on Cue Name text area Right-click Time Display Snapshot Window Double-click snapshot number Double-click Filter area Double-click Description area d8b Version 3 Shortcuts and Quick Keys ­ Revision B 01/08/01 Control Surface Shortcuts Double-press Channel SELECT Hold two adjacent channel SELECT buttons for two seconds Hold CONTROL while turning a V-Pot SELECT + CUT/ZERO SET Open Fat Channel GUI screen for that channel Opens VFD Channel Link menu Centers V-Pot (good for "zeroing" pans and EQ gains) Opens VFD menu allowing setting selected channel to zero or unity gain. Zero is default, toggling CUT will set selected channel faders to Zero. Copies main fader levels and pans to Cue 1 or Cue 2 mix (select from VFD) Disengages moving faders without affecting automation Disengages automation Stores current time to current cue number, either parked or on the fly Disengages all channel solos Solo Isolate (AFL and Mixdown Solo modes) ­ Keeps channel on when soloing other channels. [. . . ] [. . . ]