User manual KURZWEIL MUSICRAC

[. . . ] Installing the PC2 or PC2X Music Rack Installing the PC2Õs optional music rack requires only a Phillips screwdriver. To install the music rack, Þrst remove the four screws on the back panel of the PC2, as shown in the illustration below. [. . . ] Washing Wash your music rack with dish-washing detergent and plenty of lukewarm water. Rinse with clear water, and dry by blotting with a damp cloth or chamois. Remove grease, oil, or tar with a good grade of hexane, aliphatic naphtha or kerosene. These solvents are available at paint and hardware stores, and should be used in accordance with the recommendations stated by the manufacturers of the solvents. We recommend washing the music rack after cleaning it with a solvent, to remove any solvent residue. Do Not Use Window cleaning sprays, kitchen scouring compounds, or solvents such as acetone, gasoline, benzene, carbon tetrachloride, or lacquer thinner. Polishing Protect your music rack and maintain its surface gloss by occasional waxing with a good auto paste wax. Apply a thin even coat with a soft clean cloth, and polish lightly with cotton ßannel. Wipe with a damp cloth to help eliminate electrostatic charges, which can attract dust particles. When the scratches have disappeared, remove all wax residue, then polish the rack. [. . . ] Anti-static Products There are numerous anti-static cleaners for plastics. Just wipe the music rack with a soft damp cloth or chamois is to keep it dust-free between anti-static applications. [. . . ]