User manual KTM 640 LC4-E 2000
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KTM 640 LC4-E. We hope that this KTM 640 LC4-E user guide will be useful to you.
You may also download the following manuals related to this product:
KTM 640 LC4-E 2000 (4007 ko)
KTM 640 LC4-E 2000 (4003 ko)
KTM 640 LC4-E 2001 (5762 ko)
KTM 640 LC4-E 2001 (5754 ko)
KTM 640 LC4-E 2001 (5745 ko)
KTM 640 LC4-E 2001 (6632 ko)
Manual abstract: user guide KTM 640 LC4-E2000
Detailed instructions for use are in the User's Guide.
[. . . ] 400/640 LC4-E BEDIENUNGSANLEITUNG
OWNERS HANDBOOK MANUALE D'USO MANUEL D'UTILISATION MANUAL DE INSTRUCCIONES
640 LC4-E SUPERMOTO
2000
Art. Nr. 3. 205. 82 11/99
IMPORTANT
WE STRONGLY SUGGEST THAT YOU READ THIS MANUAL CAREFULLY AND COMPLETELY BEFORE GOING ON YOUR FIRST RIDE. IT CONTAINS A GREAT DEAL OF INFORMATION AND ADVICE WHICH WILL HELP YOU USE AND HANDLE YOUR BIKE PROPERLY. IN YOUR OWN INTEREST, PLEASE PAY PARTICULAR ATTENTION TO NOTICES THAT ARE MARKED AS FOLLOWS:
WARNING
IGNORING THESE INSTRUCTIONS, CAN ENDANGER YOUR BODY AND YOUR LIFE.
! [. . . ] ONLY THEN MAY THE PISTON IN THE HAND BRAKE CYLINDER BE MOVED (TO BE RECOGNIZED BY THE GREATER RESISTANCE OF THE HAND BRAKE LEVER). IF THIS FREE TRAVEL IS NOT PROVIDED, PRESSURE WILL BUILD UP IN THE BRAKING SYSTEM, AND THE FRONT WHEEL BRAKE MAY FAIL DUE TO OVERHEATING.
min. 3 mm
ENGLISH
General informations about KTM disc brakes
Checking of brake fluid level - front brake
The brake fluid reservoir is linked with the hand brake cylinder at the handlebar and the reservoir is provided with an inspection glass. With the reservoir in a horizontal position, the brake fluid level should not go below middle of the glass. WARNING IF THE BRAKE FLUID LEVEL DROPS BELOW THE MINIMUM EITHER THE BRAKE SYSTEM HAS A LEAK OR THE BRAKE PADS ARE COMPLETELY WORN DOWN. IN THIS CASE, CONSULT AN AUTHORIZED KTM DEALER IMMEDIATELY.
2 1 3
Refilling the front brake fluid reservoir*
Loosen screws 1 and remove lid 2 and membrane 3. Place hand brake cylinder in a horizontal position and fill the brake fluid reservoir to 5 mm (0, 2 in) below the rim with brake fluid DOT 5. 1 (Shell Advance Brake DOT 5. 1). IF YOU GET BRAKE FLUID IN YOUR EYES, RINSE WITH PLENTY OF WATER AND CONSULT A DOCTOR.
ENGLISH
18 5
! DON'T
CAUTION
!
5 mm
LET BRAKE FLUID GET IN CONTACT WITH PAINT, IT IS AN EFFECTIVE PAINT REMOVER. USE ONLY CLEAN BRAKE FLUID TAKEN FROM A TIGHTLY SEALED CONTAINER.
min. 1 mm
Checking the front brake pads
The brake pads can be inspected from below. WARNING AT THEIR MOST WORN POINT BRAKE PAD LININGS SHOULD NOT BE THINNER THAN 1 MM, OTHERWISE THEY COULD LEAD TO BRAKE FAILURE. FOR YOUR OWN SAFETY
DON'T PUT OFF HAVING YOUR BRAKE PADS CHANGED.
CAUTION !IF THE BRAKE PADS ARE REPLACED TOO LATE SO THAT THE LINING IS PARTLY OR ENTIRELY
WORN AWAY, THE STEEL COMPONENTS OF THE BRAKE PAD WILL RUB AGAINST THE BRAKE DISC, IMPAIRING THE BRAKING EFFECT AND DESTROYING THE BRAKE DISC.
Changing the basic position of the foot brake pedal*
4
The basic position of the foot brake pedal can be altered by turning the stop roller 4. The free play at the foot brake pedal must then be adjusted by means of the piston rod 5. Measured on the outside, the foot brake pedal must have 3-5 mm (0, 120, 20 in) of free play, before the piston rod can move the piston in the brake cylinder (to be recognised from the resistance on the foot brake pedal). IF CAUTION !
THIS FREE PLAY IS NOT PRESENT, THEN PRESSURE CAN BUILD UP IN THE BRAKE SYSTEM WHEN DRIVING, CAUSING CONSTANT FRICTION OF THE BRAKE PADS. THE BRAKING SYSTEM OVERHEATS AND CAN FAIL COMPLETELY IN EXTREME CASES.
3-5mm
Checking rear brake fluid level
The reservoir for the rear disc brake is located on the left-hand side of the vehicle next to the carburetor carburetor connection boot. The brake fluid level may not drop below the , , MlN" marking when the vehicle is in an upright position. WARNING IF THE BRAKE FLUID LEVEL DROPS BELOW THE MINIMUM EITHER THE BRAKE SYSTEM HAS A LEAK OR THE BRAKE PADS ARE COMPLETELY WORN DOWN. IN THIS CASE, CONSULT AN AUTHORIZED KTM DEALER IMMEDIATELY.
1
Refilling the rear brake fluid reservoir*
When the brake fluid level has dropped to the MIN mark, you need to refill the brake fluid reservoir. For easier access to the brake fluid reservoir it is recommended to remove the hexagon screw 1. Remove plug 2 with rubber boot 3 and add brake fluid DOT 5. 1 (Shell Advance Brake DOT 5. 1) up to the , , MAX" mark. [. . . ] AFTER RIDES ON SALTED ROADS, CLEAN MOTORCYCLE THOROUGHLY WITH COLD WATER AND LET IT DRY WELL!
!
STORAGE
Should you desire to make a pause over a longer space of time, please observe the following instructions: Clean motorcycle thoroughly (see chapter: CLEANING) Change engine oil, oil filter and fine screen filter (old engine oil contains aggressive contaminations). Warm up the engine once again, close the fuel cock and wait until the engine dies. Then open the drain plug of the float chamber to remove the remaining fuel. Actuate kick-starter 10 times in order to distribute the oil onto the cylinder walls and mount the spark plug. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KTM 640 LC4-E
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KTM 640 LC4-E will begin.