User manual KTM 300 XC-W
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KTM 300 XC-W. We hope that this KTM 300 XC-W user guide will be useful to you.
You may also download the following manuals related to this product:
KTM 300 XC-W (4016 ko)
KTM 300 XC-W (4047 ko)
KTM 300 XC-W (4833 ko)
KTM 300 XC-W 2006 (4986 ko)
KTM 300 XC-W 2008 (8858 ko)
KTM 300 XC-W 2006 (4995 ko)
KTM 300 XC-W 2008 (8863 ko)
KTM 300 XC-W 2009 (4848 ko)
KTM 300 XC-W 2009 (4841 ko)
KTM 300 XC-W 2009 (4833 ko)
KTM 300 XC-W 2010 (4000 ko)
KTM 300 XC-W 2010 (4029 ko)
KTM 300 XC-W 2010 (4042 ko)
KTM 300 XC-W 2007 (5028 ko)
KTM 300 XC-W 2007 (4975 ko)
KTM 300 XC-W 2007 (4980 ko)
KTM 300 XC-W 2006 (5014 ko)
KTM 300 XC-W 2008 (8883 ko)
KTM 300 XC-W 2008 (8865 ko)
KTM 300 XC-W 2009 (4839 ko)
KTM 300 XC-W 2010 (3993 ko)
KTM 300 XC-W 2007 (4996 ko)
KTM 300 XC-W 2006 (4988 ko)
Manual abstract: user guide KTM 300 XC-W
Detailed instructions for use are in the User's Guide.
[. . . ] OWNER'S MANUAL 2010
125 EXC EU 125 EXC SIX DAYS EU 150 XC USA 200 EXC EU 200 EXC AUS 200 XCW USA 250 EXC EU 250 EXC SIX DAYS EU 250 EXC AUS 250 XC EU/USA 250 XCW USA 300 EXC EU 300 EXC SIX DAYS EU 300 EXC AUS 300 XC EU/USA 300 XCW USA
Art. 3211466en
DEAR KTM CUSTOMER
DEAR KTM CUSTOMER
1
Congratulations on your decision to purchase a KTM motorcycle. You are now the owner of a state-of-the-art sports motorcycle that will give you enormous pleasure if you service and maintain it accordingly. We wish you a lot of enjoyment in riding this vehicle!
Enter the serial numbers of your vehicle below. [. . . ] 48)
400387-10
Move the handlebar to and fro over the entire steering range. The handlebar must be able to move easily over the entire steering range. » If detent positions are noticeable: Adjust the play of the steering head bearing.
x(
p. Guideline Screw, top steering head
800016-10
M20x1. 5
10 Nm (7. 4 lbf ft)
Using a plastic hammer, tap lightly on the upper triple clamp to avoid strains. Guideline Screw, top triple clamp M8 20 Nm (14. 8 lbf ft)
Tighten screw . Guideline Screw, top steering stem M8 20 Nm (14. 8 lbf ft)
(XC)
Loosen screws . Guideline Screw, top steering head M20x1. 5 10 Nm (7. 4 lbf ft)
B00019-10
Using a plastic hammer, tap lightly on the upper triple clamp to avoid strains. Guideline Screw, top triple clamp M8 17 Nm (12. 5 lbf ft)
MAINTENANCE WORK ON CHASSIS AND ENGINE
Mount and tighten screw . Guideline Screw, top steering stem M8 17 Nm (12. 5 lbf ft) Loctite® 243TM
49
(EXC SIX DAYS, XCW) Loosen screws . Guideline Screw, top steering head
800022-10
M20x1. 5
10 Nm (7. 4 lbf ft)
Using a plastic hammer, tap lightly on the upper triple clamp to avoid strains. Guideline Screw, top triple clamp M8 17 Nm (12. 5 lbf ft)
Mount and tighten screw . 48) Loctite® 243TM
Check the play of the steering head bearing. (
Removing the fork legs
11. 25
x
Remove the front wheel.
x(
p. 66)
Remove screws and take off the clamp.
(EXC, EXC SIX DAYS, XC-W) Remove cable binder . Hang the brake caliper and the brake line loosely to the side.
100802-10
(EXC EU/AUS) Loosen screws . Remove the fork leg on the right.
100804-10
(EXC SIX DAYS, XCW) Loosen screws . Remove the fork leg on the right.
100803-10
MAINTENANCE WORK ON CHASSIS AND ENGINE
(XC) Loosen screws . Remove the fork leg on the right.
50
B00021-10
Installing the fork legs
11. 26
x
Position the fork legs.
Info
The topmost sunk nut in the fork leg must be flush to the upper edge of the upper triple clamp. Position bleeder screws toward the front.
B00018-10
(EXC EU/AUS) Tighten screws . Guideline Screw, bottom triple clamp
100804-11
M8
20 Nm (14. 8 lbf ft)
M8
15 Nm (11. 1 lbf ft)
(EXC SIX DAYS, XCW) Tighten screws . Guideline Screw, bottom triple clamp
100803-11
M8
17 Nm (12. 5 lbf ft)
M8
12 Nm (8. 9 lbf ft)
(XC)
Tighten screws . Guideline Screw, top triple clamp M8 17 Nm (12. 5 lbf ft)
Tighten screws . [. . . ] 134) (SAE 5) Guideline Use only oils that comply with the specified standards (see specifications on the container) and that possess the corresponding properties. Supplier Motorex® Racing Fork Oil
Hydraulic fluid (15)
According to ISO VG (15) Guideline Use only hydraulic fluid that complies with the specified standards (see specifications on the container) and that possesses the corresponding properties. Supplier Motorex® Hydraulic Fluid 75
SUBSTANCES
Shock absorber oil (SAE 2. 5) (50180342S1)
According to SAE ( p. 134) (SAE 2. 5) Guideline Use only oils that comply with the specified standards (see specifications on the container) and that possess the corresponding properties.
131
Super unleaded gasoline, mixed with 2-stroke engine oil (1:60)
According to DIN EN 228 JASO FC ( 1:60 p. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KTM 300 XC-W
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KTM 300 XC-W will begin.