User manual KOMPERNASS POWERFIX KH 4055 WHEEL NUT WRENCH

[. . . ] Powerfix WHEEL NUT WRENCH KH4055 Intended use The wheel nut wrench KH4055 is intended for loosening and tightening of wheel nuts / bolts during a tyre change. Technical data Length: Wrench widths: 350 mm - 530 mm 17 mm and 19 mm Using the wheel nut wrench · Park the vehicle on a level surface, put it in a low gear and set the hand break. [. . . ] · Loosen the wheel nuts / bolts of the wheel to be changed in an alternating cross pattern before lifting the vehicle with the jack. 2 · Lift the vehicle until the wheel to be changed is no longer in contact with the floor. · Remove the wheel nuts / bolts in an alternating cross pattern and remove the wheel. · Put the replacement wheel in position and tightly screw in the wheel nuts / bolts. · Lower the vehicle and retighten the wheel nuts in an alternating cross pattern with the wheel nut wrench. Important: After changing the wheel, check the air pressure in all tyres. [. . . ] Do not perform any work under the vehicle while it is lifted up with the jack. 3 UK Kompernaß GmbH Burgstrasse 21 D-44867 Bochum www. kompernass. com ID No. : KH4055_0706_V1 [. . . ]