User manual KOMPERNASS POWERFIX KH 3221 FURNITURE TRANSPORTER

[. . . ] · Injuries are possible through the uncontrolled lowering of loads. · Use the lever arm and the four roller bases only if they are in a faultless condition. · Ensure that all doors and drawers that the piece of furniture might have are secured against unintentional opening before shunting it. [. . . ] · Shunt larger furniture pieces with assistance from a second person. · Ensure that there are no obstacles in the way on the shunting route. · Only use the furniture transporter with four roller bases on level surfaces. Intended purpose The furniture transporter with four roller bases is only suitable for shunting furniture over short distances. The furniture transporter with four roller bases is NOT intended for commercial employment. The manufacturer accepts no liability for damage resulting from improper or false usage of the device. -4- KH3221 Description With the help of the furniture transporter with four roller bases you can lift pieces of furniture and place them on the roller bases. Subsequently, you can shunt the furniture over short distances with a minimum of effort. Placing furniture on the roller bases 1. Hints: To avoid an irregular elevation, always place the lever arm in the middle of the side to be lifted. Push the swivelling head of the lever arm under the furniture and in the middle of it (A). Hold the lever arm pressed down. Items supplied Immediately after unpacking check to ensure that all components are available and that there are no signs of visible damage to the furniture transporter with four roller bases: · 1 Lever arm with swivelling head · 4 transport rollers with rotatable loading surfaces · Operating Instructions Overview Lever arm Hand grip Roller base Rotatable loading surface Swivelling head B A Technical data Loading per roller base: 150 kg Weight with packaging: ca. Place one roller base (C) under each raised corner of the furniture piece. Shunting furniture 1. Adjust the roller bases so that the wheels all face in the same direction. Pull/push the furniture piece to the desired location with the assistance of the roller bases . C Removing the roller bases C Hint: To avoid an irregular elevation, always place the lever arm in the middle of the side to be lifted. Push the swivelling head of the lever arm under the furniture and in the middle of it. Repeat the above procedure for the opposite side of the furniture piece. 6. To lower the furniture piece onto the roller base , slowly lift the lever arm (D). 7. Repeat the above procedure for the opposite side of the furniture piece. [. . . ] For cleanng the lever arm and the four roller bases NEVER use spirits, solvents or detergents that can attack plastics. Clean the lever arm and the four roller bases only with a moist cloth. KOMPERNASS GMBH BURGSTRASSE 21 D-44867 BOCHUM www. kompernass. com Storage In each of the roller bases there is a hole. [. . . ]