User manual KOMPERNASS PARKSIDE PLP 160 SOLDERING GUN

[. . . ] We are delighted that you have decided to purchase our high quality PLP 160 soldering gun. Please make sure you familiarise yourself fully with the way the equipment works before you use it for the first time and that you understand how to handle electrical power tools correctly. [. . . ] F) If you do not use the device for a lengthy period, it is imperative to pull the device plug out of the socket. This device may only be operated with 230 V alternating current and at a frequency of 50 Hz. In order to heat up the soldering tip, keep the switch pressed down for max 12 sec. Before starting the soldering work until the necessary soldering heat has been reached - then let go of the push-button switch. The duration of the power supply controls the soldering heat (longer power supply = higher soldering heat). During the soldering process, never keep the push-button switch pressed down for too long. Determine the necessary duration of the power supply in practice by checking the soldering heat. Press the ON/OFF switch for a maximum of 12 seconds - then do not operate the gun for at least 48 seconds. As soon as you let go of the push-button switch, the soldering heat is reduced automatically. Constant soldering heat guarantees an optimum soldering quality, melting of the soldering tip due to excessive temperatures is avoided and the service life of the device is extended. [. . . ] If the operation indicator is defective, return the soldering gun to the manufacturer or to the customer service. 21, D-44867 Bochum, Germany, hereby declare that this product conforms with the following EC regulations: EC low voltage regulations/ (73/23/EEC), (93/68 EEC) Electromagnetic compatibility: EN 60335-1:1994+A11+A1+A12 Applicable harmonised standards: EN 60335-2-45:1996 Brand name: PARKSIDE Type: PLP 160 Description of the machinery: SOLDERING GUN Bochum, 31. [. . . ]