User manual KOMPERNASS LERVIA KH 4404 AUTOMATIC PAPER SHREDDER

[. . . ] · Do not expose the appliance to the rain and never use it in a humid or wet environment. · Ensure that the electric cable never becomes wet or moist during operation. To avoid injuries: · The Shredder should be used by only one person at a time. [. . . ] Ensure that the appliance and the power plug are easily accessible, particularly in an emergency. · In cases of danger, immediately remove the electrical plug from the socket. · Never use the shredder for tasks for which it was not designed. Never use the appliance when you are distracted or don't feel well. Operation Switching the appliance on: · Place the switch in the position (ON/AUTO) for shredding. Inserting paper: · Feed paper into the cutter opening in panel format from above. The motor starts automatically and also switches off automatically if no further paper is inserted. Inserting credit cards: · Insert the credit card into the middle of the cutter opening from above. Inserting a CD: · Insert the CD into the cutter opening (CD) from above. Clearing a material blockage: · Push the switch into the position (REVERSE) should the material become jammed. Reverse running is now engaged and the item to be shredded will be ejected. Switching the appliance off: · To switch off the machine, push the switch into the middle position (OFF). Description of the appliance Cutter head Waste collector Viewing window Cutter opening (Paper & Credit cards) Switch Cutter opening (CD) Initial operation · Place the cutter head on the waste collector so that the power cable is located at the rear of the appliance. · Connect the paper shredder to a wall socket. -4- KH4404_IB_UK. qxd 01. 08. 2006 13:37 Uhr Seite 5 Lervia KH 4404 Emptying the waste collector The waste collector has a capacity of 17 Liters. At the latest when the viewing window of the waste collector is blocked by shredded material. · Remove paper waste from the waste collector before you start to shred CD's or credit cards. · Dispose of the waste material in an environmentally responsible manner. Notice regarding overheating of the appliance: The appliance will switch off automatically if it overheats. [. . . ] Kompernaß GmbH Burgstrasse 21 D-44867 Bochum www. kompernass. com 3 Minutes Crosscut, 4x23mm particles Working width: 225 mm Collection bin: 17 Litres Depth of slot complies with DIN EN 294 -5- KH4404_IB_UK. qxd 01. 08. 2006 13:37 Uhr Seite 6 Lervia KH 4404 Troubleshooting If the material to be shredded jams: This means you have inserted too much material into the appliance (max. Reverse running is now engaged and the item to be shredded will be ejected. If the appliance suddenly ceases operation: This means that the appliance is overheated and that the automatic safety cut-out has activated itself. [. . . ]