User manual KOMPERNASS KH 4183 TABLE LAMP

[. . . ] This appliance is not intended for use as sole illumination, for industrial or commercial applications or for use in occupational areas. The warranty does not provide compensation for damage caused by improper use of the appliance!1 1 1 3 1 Pedestal base made of brushed metal Lamp rod Lampshade made of paper Lampshade tensioners Frame with power cable and On/Off switch 1 Bulb 1 Operating manual Do not permit children to handle electrical appliances without supervision - they cannot correctly assess the potential risks of injury. [. . . ] Should it become damaged contact your nearest authorized customer service centre or dealer to have it replaced. When a storm and/or thunderstorm with the risk of lightning threatens please disconnect the appliance from the mains power. Do not leave the appliance unattended at any time when it is in use. Do not position the appliance below inflammable objects, especially not in the vicinity of curtains and drapes. Ensure that the lamp maintains an all round minimum distance of 35 cm to all surrounding objects. With areas on which the light falls directly, a distance of 50 cm must be maintained. Do not place the lamp at locations where, should it inadvertently tip over, it would land on easily inflammable materials, e. Before changing the light bulb, ALWAYS wait for the bulb and the bulb holder to cool down. This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. Children should be supervised to ensure that they do not play with the appliance. First put the components together completely before operating the lamp. > Take all lamp components and the light bulb y from the packaging. > Now, carefully and slowly pull the power cable r from the lamp pedestal e whilst, at the same time you move the lower end of the lamp rod w towards the thread of the lamp pedestal e. > When the lamp rod w has reached the pedestal e, screw the inner thread of the lamp rod w onto the thread of the lamp pedestal e. > When screwing the lamp rod elements together, take steps to ensure the power cable r is not damaged in any way!> Unscrew the coupling ring u from the bulb holder and deposit the lampshade q by its ring retainer on the bulb holder. > Rescrew the coupling ring u back onto the bulb holder and then firmly tighten down the lampshade q. > Now remove the light bulb y from its packaging and screw it into the bulb holder. [. . . ] NEVER submerse the appliance or its components in water or other fluids!Cleaning the appliance: Clean the appliance only with a dry or lightly moistened cloth. Do not use abrasive or aggressive cleaning agents, these could damage the upper surfaces. [. . . ]