User manual KOMPERNASS KH 3173 TROLLEY JACK

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KOMPERNASS KH 3173 TROLLEY JACK. We hope that this KOMPERNASS KH 3173 TROLLEY JACK user guide will be useful to you.


KOMPERNASS KH 3173 TROLLEY JACK : Download the complete user guide (455 Ko)

You may also download the following manuals related to this product:

   KOMPERNASS KH 3173 TROLLEY JACK (558 ko)
   KOMPERNASS KH 3173 TROLLEY JACK (558 ko)
   KOMPERNASS KH 3173 TROLLEY JACK (558 ko)
   KOMPERNASS KH 3173 TROLLEY JACK (487 ko)
   KOMPERNASS KH 3173 TROLLEY JACK (516 ko)
   KOMPERNASS KH 3173 TROLLEY JACK (516 ko)
   KOMPERNASS KH 3173 TROLLEY JACK (516 ko)
   KOMPERNASS KH 3173 TROLLEY JACK (636 ko)
   KOMPERNASS KH 3173 TROLLEY JACK (636 ko)
   KOMPERNASS KH 3173 TROLLEY JACK (636 ko)
   KOMPERNASS KH 3173 TROLLEY JACK (486 ko)
   KOMPERNASS KH 3173 TROLLEY JACK (444 ko)
   KOMPERNASS KH 3173 TROLLEY JACK (558 ko)
   KOMPERNASS KH 3173 TROLLEY JACK (487 ko)
   KOMPERNASS KH 3173 TROLLEY JACK (516 ko)
   KOMPERNASS KH 3173 TROLLEY JACK (636 ko)
   KOMPERNASS KH 3173 TROLLEY JACK (486 ko)

Manual abstract: user guide KOMPERNASS KH 3173 TROLLEY JACK

Detailed instructions for use are in the User's Guide.

[. . . ] UK KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM www. kompernass. com ID Nr. : KH3173-04/07-V1 Trolley Jack KH 3173 Operating instructions KH3173 Trolley Jack KH 3173 Keep this manual for future reference and pass it on with the device to any future owners! Intended Use The Trolley Jack is intended for the short term lifting of motor vehicles and only for domestic use. The Trolley Jack is not intended for permanently holding raised motor vehicles in position and is not intended for use in commercial or industrial areas. Safety instructions · Only use the Trolley Jack if it is in a faultless condition. [. . . ] 120 - 355 mm 180° SAE 10 Description of the appliance Lifting lever Carrying grip Loading plate Release valve Lifting lever collet -3- KH3173 Preparatory steps 1. Place the lifting levers onto the release valve at the front. Turn it clockwise to close it completely. Turn the lifting levers clockwise until they are secure against being pulled out. On the first utilisation or after an extended period of non-usage, first pump the Trolley Jack without any loading (6-7 pump movements). This distributes the hydraulic oil evenly again inside the device. 3. Now raise the vehicle until you have sufficient clearance to position the axle stands. Permit the vehicle to drop onto the axle stands in that you slowly open the release valve by turning it in an anti-clockwise direction. Lowering the vehicle 1. Then, with the lifting lever , slowly turn the release valve (anti-clockwise) and carefully allow the vehicle to descend. As soon as the Trolley Jack is removed from under the vehicle, the loading plate can be completely pressed down with the foot. Raising the vehicle Important: Refer to the vehicle owner's handbook to find out where the lifting points are located. Push the loading plate to exactly in the middle below the lifting point. [. . . ] Related harmonised standards: EN 1494:2000 Kompernaß Handelsgesellschaft GmbH Burgstr. 21, D-44867 Bochum Bochum, den 18. 04. 2007 Hans Kompernaß, General Manager -5- [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KOMPERNASS KH 3173 TROLLEY JACK




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KOMPERNASS KH 3173 TROLLEY JACK will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.