User manual KOMPERNASS EBENCH KH 350 DESIGN AUDIO SYSTEM WITH CD PLAYER AND DIGITAL RADIO

[. . . ] This warning symbol informs the user of the dangerous voltage in the device. This warning symbol informs the user of important operating information for this device Warning!Non-perceivable escape of laser radiation if the device interlocks are opened or damaged. When setting-up the device ensure that it is not in the immediate vicinity of water, e. [. . . ] Never handle the mains cable and/or the plug with damp or wet hands because of the danger of electrical shocks!Cables should not be laid on the floor in such a way it is possible to step on them. Please be especially careful with the mains cable between the electrical socket and the device. Using cables and plugs which do not correspond to the stipulated voltage can result in fire and/or electrical shocks. If the equipment is not going to be used for a long period of time, it should be unplugged from the mains power supply and the batteries removed. Mode Headphones connection Controls the volume Switches the system on/off Activates the preview function Activates the random play function Starts playing/pauses CD Selects AM/FM waveband Activates the programming function Repeats individual/all CD tracks When used with CD player: skips to the begin ning of the next track/to the beginning of the track which is currently playing or forward/ reverse search; When used with the tuner: automatic tuning Stops playing the CD Changes display: track playing time/remaining playing time of entire CD Connecting the loudspeakers To connect the loudspeakers, connect each black cable to the (--) connecting terminal and each red cable to the (+) connecting terminal at the back of the appliance. Mains operation Before you continue, check whether the mains voltage stated on the back of the appliance corresponds with your local mains voltage. Note: If the equipment is not be used for a long period, take the batteries out of the remote control. After pressing the MEMO/PROGRAM button in the standby mode, press the SKIP/SEARCH but tons (forwards/backwards) until the correct hour appears on the display. Press the MEMO/PROGRAM button again and then press SKIP/SEARCH (forwards/backwards) until the correct minute appears on the display. When the CD starts, the total number of tracks will appear on the display. The display indicates the number of the current track and the playing time of the track. The display indicates how much of the track's playing time has lapsed. The display indicates the total number of tracks and the total CD playing time. Repeat function This function allows you to play an individual track or all the tracks on one CD repeatedly. To play an individual track repeatedly, press the MEMO-UP/REPEAT button twice while the CD is playing. To deactivate the repeat function, press the MEMO-UP/REPEAT button again until REPEAT dis appears from the display. Programmed play function With the programming function you can compile your own music programme. [. . . ] Keep on pressing the MEMO-UP/REPEAT button until the required programme location and the station frequency appear on the display. A cassette deck) to your design audio system in order to use the system's loudspeakers to play music, you must connect this appliance with a cinch cable to the inputs marked "AUX" on the back of your design audio system. Then press the AUX button; it is now possible to start playing music from the connected appliance via the design audio system. Use no chemicals, alcohol, thinning agents or other solvent-containing cleaners. [. . . ]