User manual KOMPERNASS EBENCH KH 2300 DESIGNER AUDIO UNIT WITH VERTICAL CD PLAYER

[. . . ] Therefore you must never leave children unsupervised in the vicinity of electrical equipment. The heat building up inside the equipment can lead to faults or to it catching fire. Do subject this equipment to extremes of temperature: ­ Avoid direct sunlight and heaters ­ Do not cover the ventilation slots ­ Leave approx. 10 cm free around the sides The equipment is not to be used in the direct vicinity of inflammable materials (e. [. . . ] Move the hours setting forward or backward using the Forward button ) or Reverse button 8. Move the minutes setting forward or backward using the Forward button ) or Reverse button 8. Press the MEMORY/CLK-ADJ button \ again - the display stops flashing and the clock starts (the colon flashes). If the Switch-on time feature is enabled then your Designer Audio Unit can wake you at your chosen time. For TUNER (RADIO) set the desired station, for TAPE (CASSETTE RECORDER) insert the tape and wind to the correct place or insert a CD and if required program a track sequence. 05) Press the MEMORY/CLK-ADJ button \ once - the hours display flashes. 06) Move the hours setting forward or backward using the Forward button ) or Reverse button 8. 07) Press MEMORY/CLK-ADJ button \ again - the minutes display flashes. 08) Move the minutes setting forward or backward using the Forward button ) or Reverse button 8. If you enable the Switch-off time feature, your Designer Audio Unit will always switch off at the set time. 03) Press the MEMORY/CLK-ADJ button \ once - the hours display flashes. 04) Move the hours setting forward or backward using the Forward button ) or Reverse button 8. 05) Press MEMORY/CLK-ADJ button \ again - the minutes display flashes. 06) Move the minutes setting forward or backward using the Forward button ) or Reverse button 8. 07) Press the MEMORY/CLK-ADJ button \ again - the Switch-off time is stored. To switch off the TIMER functions, press the TIMER button 0 repeatedly until the display @ shows TIMER. You can set a time of between 90 and 10 minutes, after which the device switches itself off. to activate a Switch-off time of 90 minutes , press the SLEEP button - once briefly. To set a shorter Switch-off time, keep the SLEEP button - pressed until the desired time is displayed. To switch off the Sleep function, press the SLEEP button - repeatedly until the display @ no longer shows SLEEP. If you use the wire aerial for FM reception: The wire must be fully wound out Determine the best position by trial and error Attach the wire aerial to the wall if necessary using a strip of adhesive tape. For MW reception, place the device in the best position for the in-built aerial, again by trial and error. [. . . ] To switch off the repeat functions, press the M-UP/REPEAT button = repeatedly until the display @ no longer shows REPEAT. 01) 02) 03) 04) The RANDOM function selects a random choice of tracks from the inserted CD. Press the PLAY/PAUSE button & - to start playing a random track sequence. Behind it you will find the operating buttons for the cassette recorder (and the headphone connector). [. . . ]