User manual KOMPERNASS EBENCH KH 2292-2293-2294

[. . . ] · As long as no button is pressed, or if no valid DCF 77 signal has been received within 15 minutes then the display hows»-:--« the »Antenna« display is deleted (invisible, antenna-symbol is not displayed). 4 IB_KH2292_content_UK. qxd 03. 03. 2005 14:26 Uhr Seite 5 Radio signal for Great Britain (MSF) · Display »LON« starts to flash at 1 Hz , »antenna« at 0. 5 Hz. To avoid life-threatening electric shocks: · 'Warning!: Electric shock. Do not operate the appliance if the power plug, power cord or the appliance itself is damaged. If the appliance has been dropped then have it checked by a qualified electrician before turning it back on. Never open the housing or insert objects through the ventilation slits. [. . . ] If you do not press any button for 15 seconds then the appliance automatically switches back to the normal display. 6 IB_KH2292_content_UK. qxd 03. 03. 2005 14:26 Uhr Seite 7 If»Date« and/or »World Time« are selected, then they appear alternately with the LCD display. · Every time the minutes are changes, the real-time clock is compared with the of the alarm times, if this is activated (refer also to section: »Alarm Activated«). 2. Press the (­) or (+) buttons to change the current setting in daily intervals. Pressing and holding the buttons changes the time display in intervals of 10 days. As soon as the correct date is set, the marking for the day is automatically updated. To confirm your settings, once more press the mode button", and the appliance switches to the setting of the respective local time. If you do not press any button for 15 seconds then the current settings are confirmed and the appliance then switches back automatically into automatic mode. Setting the alarm times (Alarm 1 and 2) When you press the mode button µ you can call up the following settings one after the other: setting alarm time 1/ setting alarm time 2/ setting the time/ setting the date/ display time zone display of the world time/ setting the date reminder 1-10 Automatic mode Setting the time 1. The hours and minutes display of the current timestarts to flash and the secondary display counts upwards continuously. Press the (­) or (+) buttons to change the time display in minute intervals. Pressing and holding the buttons changes the time display in intervals of 10 minutes. 0:00 + 1:00 + 2:00 + 3:00 + 4:00 + 5:00 + 6:00 + 7:00 + 8:00 + 9:00 + 10:00 + 11:00 + 12:00 - 11:00 - 10:00 - 9:00 - 8:00 - 7:00 - 6:00 - 5:00 - 4:00 - 3:00 - 2:00 - 1:00 City London Munic Cairo Moscow Dubai Karachi Dakar Bangkok Hongkong Tokyo Sydney Nouméa Wellington (GMT-11) Honolulu Anchorage Los Angeles Denver Chicago New York City Caracas Rio de Janeiro (GMT-2) (MGZ-1) (GMT-2) (MGZ-1) · Abbr. LON MUN CAI MOW DXB KHI DAC BKK HKG TYO SYD NOU WLG -11 HNL ANC LAN DEN CHI NYC CCS RIO -2H -1H Using the SDA function (, , Special Day Alert"), you can be reminded of special days. If SDA is activated, an acoustic signal is sounded from 8. 00 to 23. 00 on every hour for 10 minutes. The radio is hen muted, even when switched on, and , , SDA" flashes on the display. · Press the mode button µ 7x , until the date 31. 12. 2003 appears on the display. Now set the time that you want to be reminded of, by changing the setting using the and buttons. Keep the respective button pressed, in order to speed up this procedure in steps of 10. Note: If you ignore the setting for the year (by pressing the Snooze " button after setting the date), then the SDA function activates itself every year on the set date. The SDA function is cancelled by pressing any button. · · · · Important!The selection of the time zone influences the calculation of the time when the radio signal is switched off. To confirm the current settings, once more press the mode button µ, and the appliance switches to the overview (display) of the world time. [. . . ] To set the optimal reception, you may have to change the position of the radio. Power failure protection By inserting 2x Micro 1b5 V AAA batteries (for KH 2292 under the appliance, for models 2293/94 at the rear in a separate compartment), you can avoid that the functioning of the appliance is interrupted in case of a power failure and therefore avoid losing the date, time and any alarm time set in the appliance. The batteries ensure that the radio alarm continues to run on an emergency power supply even after there is a failure in the mains. When switching back on the mains supply the correct time automatically appears on the display. [. . . ]