User manual KOMPERNASS BIFINETT KH 25 CITRUS PRESS

[. . . ] The manufacturer accepts no liability for damage(s) resulting from usage that is contrary to these instructions. Not for commercial use. Important safety instructions To avoid potentially fatal electric shocks: · The rating of the local power supply must tally completely with the details given on the rating plate of the appliance. · Arrange for defective power plugs and/or cables to be replaced at once by qualified technicians or our Customer Service Department. [. . . ] Place both parts of the fruit pulp sieve r/y into each other so that the fruit pulp regulator tprotrudes through the recess. The fruit pulp regulator t must lie on the grip and catch in the rabbet on the grip. Press the small squeezing cone eon the drive axle i so that it engages. Note: If you want to press oranges or other larger fruits, place the large squeezing cone w over the small squeezing cone e. Ensure that the lobes of the small squeezing cone e engage in the recesses of the large squeezing cone w. The appliance is now ready for use. Appliance description q Lid w Large squeezing cone e Small squeezing cone r Upper fruit pulp sieve t Fruit pulp regulator y Lower fruit pulp sieve u Juice collector i Drive axle o Power cable with power plug a Appliance plinth s Power cable storage Set-up and assembly of the appliance Important: Ensure that the power plug is not in the power socket before assembling the appliance. Unwind the power cable o completely from the cable storage s and secure it in the lateral recess on the appliance plinth a. Place the appliance plinth a on a level and slip-free surface. -5- Juice extraction 1. Adjust the fruit pulp regulator t, by sliding it, so that the slits in the fruit pulp sieve r/y lie exactly above each other if you wish to have fruit juice with fruit pulp. Adjust the fruit pulp regulator t , by sliding it, so that the slits in the fruit pulp sieve r/y are not lying above each other if you do not wish to have fruit juice with fruit pulp. The appliance switches itself on automatically as soon as the squeezing cone w/e is pressed down. When no more juice flows from the fruit, stop applying pressure to the squeezing cone w/e. Press the squeezing cone w/e down repeatedly to loosen it, until it turns in the opposite direction. When no more juice flows from the fruit, stop applying pressure to the squeezing cone w/e. Continue similarly with further fruithalves until you have squeezed out the desired volume of fruit juice. The current volume squeezed can be read off from the scale on the side of the juice collector u. [. . . ] · Clean all other removable parts in a warm mild-detergent solution and dry them carefully. · To clean the fruit pulp sieve r/y, take it apart and clean it with a dishwashing brush under running water. The appliance and its components may not be cleaned in a dishwasher or in boiling water. Storage If you do not intend to use the appliance for an extended period, wrap the power cable o around the power cable storage s, directing the end of the cable through the lateral recess on the appliance plinth a. [. . . ]