User manual KAWAI X140-D

[. . . ] The electric screed heat control panel utilizes touchpad technology for simplified operation and backlit LEDs provide easy recognition in order to create a user-friendly operating environment. The panel includes on/off heat control switch, three pre-set temperature settings for each screed section, fault indicators and manual overrides for each screed plate section. page 5 Serviceability The X140-D screed has been designed for easy service and maintenance. Access to components such as screed plate adjusters, slope stops, wiring harnesses, hydraulic lines and grease fittings make service quick and efficient. [. . . ] Remote Extender Controls The remote extender control allows the operator to adjust paving width, tow point and material flow from the end of the extender. Versatility The small footprint of the screed limits handwork when paving in tight locations. Quick reacting extenders and exceptional mat quality allows the screed to be used in commercial and highway applications. Power Berm (Optional) The power berm creates a 305 mm (12") or 457 mm (18") wide berm. the berm height is hydraulically adjustable and provides a maximum end berm height of 152 mm (6"). Extender Controls Power Berm Screed Plates The industry-leading electric heating system delivers tight textures for high-quality mats and a long service life. Screed Plates The screed plates are constructed of an abrasion resistant alloy steel and utilize a curved nose design that provides pre-compaction and good material flow. Hydraulically-Driven Vibrators Hydraulically-driven vibrators mounted on the main screed and extenders increase mix density under the screed. Electric Heating Elements The heating elements are located in each screed plate section to provide even heat distribution. The heating elements are reusable and can be easily removed and installed on new screed plates. Uniform Heating The heating elements provide uniform heat distribution over the entire screed plate for reliable operation. The bolts thread into large nuts welded onto the underside of the screed frame. The front-mounted extenders are supported by two 51 mm (2") diameter extendable tubes that provide torsional resistance and rigidity. Extender width changes can be made from the tractor, main screed or remote-mounted control panels. The remote-mounted control panels are positioned at the end of each extender. Extenders are equipped with vibrators and heaters that are separate from the main screed. Screed Controls The controls are logically grouped providing easy operation. Main control consoles are mounted on each side of the screed and include a wrist rest. The electric screed control console is mounted on the left side of the screed near the center walkway. The electric heat screed control panel includes a touch pad with high intensity LEDs for simplified use. Remote-mounted control panels are mounted on the outboard side of each extender. They contain switches for the extender width, tow point height and the feeder system. [. . . ] The spring-loaded design also creates a contained joint with the adjacent mat. Thickness Screws Thickness control screws with spinner handles are located on the outboard side of each control console. Two thread configurations are available including; Acme clockwise and Acme counterclockwise with 25. A spherical bearing located on the drop arm pivot reduces friction for easy adjustment. [. . . ]