User manual KAWAI KSP 5 ADVANCED OPERATION

[. . . ] If you enter the wrong PIN three times, your SIM card locks automatically. To unlock the card, you must enter a PUK which is provided by service provider at the time of purchase. ) 5 Safety and usage information Comply with the following precautions to avoid dangerous or illegal situations and ensure peak performance of your wireless WAN embedded PC. For the Safety and usage information for the Notebook PC, please refer to the main User's Guide of the Notebook PC. [. . . ] handle and dispose of batteries and chargers with care UseonlySamsung-approvedbatteriesandchargersspecificallydesignedforyourwirelessWAN embedded PC. Incompatible batteries or chargers can cause serious injuries or damage to your wireless WAN embedded PC. Avoid exposing the battery to high external pressure, which can lead to an internal short circuit and overheating. Safety precautions Follow all safety warnings and regulations Comply with any regulations that restrict the use of a wireless WAN embedded PC in a certain area. Usage precautions during 3G connection : Keep safe distance from pregnant women's stomach or from lower stomach of teenagers. Avoid interference with pacemakers Maintain a minimum of 15 cm (6 inches) between wireless WAN embedded PC and pacemakers to avoid potential interference, as recommended by manufacturers and the independent research group, Wireless Technology Research. If you have any reason to suspect that your wireless WAN embedded PC is interfering with a pacemaker or other medical device, turn off the wireless WAN embedded PC immediately and contact the manufacturer of the pacemaker or medical device for guidance. Turn off the wireless WAN embedded PC in potentially explosive environments Do not use your wireless WAN embedded PC at refueling points (service stations) or near fuels or chemicals. Turn off your wireless WAN embedded PC whenever directed by warning signs or instructions. Your wireless WAN embedded PC and memory cards may be damaged by exposure to magnetic fields. donotusecarryingcasesoraccessorieswithmagneticclosuresorallowyourwireless WANembeddedPCtocomeincontactwithmagneticfieldsforextendedperiodsoftime. Avoid interference with other electronic devices Your wireless WAN embedded PC emits radio frequency (RF) signals that may interfere with unshielded or improperly shielded electronic equipment, such as pacemakers, hearing aids, medical devices, and other electronic devices in homes or vehicles. Consult the manufacturers of your electronic devices to solve any interference problems you experience. When you communicate with your Notebook PC, the system handling your connection controls the power level at which your Notebook PC transmits. ) Body worn operation Important safety information regarding radiofrequency radiation (RF) exposure To ensure compliance with RF exposure guidelines the Notebook PC must be used with a minimum of 20. 0 cm antenna separation from the body (The Tx antenna is located in the top of the LCD). Failure to observe these instructions could result in your RF exposure exceeding the relevant guideline limits Limiting exposure to radio frequency (RF) fields ForindividualsconcernedaboutlimitingtheirexposuretoRFfields, theWorldHealthOrganisation (WHO) provides the following advice: Precautionarymeasures:Presentscientificinformationdoesnotindicatetheneedforanyspecial precautions for the use of the Notebook PC. If individuals are concerned, they might choose to limit their own or their children's RF exposure by limiting the length of connections, or using `hands-free' devices to keep your Notebook PC away from the head and body. [. . . ] If individuals are concerned, they might choose to limit their own or their children's RF exposure by limiting the length of connections, or using `hands-free' devices to keep your Notebook PC away from the head and body. Further information on this subject can be obtained from the WHO home page http://www. 198, Fangzhou Road, Suzhou Industrial Park, Jiangsu Province, 215021, China (Factories name and address) Declaration & Applicable standards We hereby declare, that the product above is in compliance with the essential requirements of the R&TTE Directive (1999/5/EC) by application of the standards below. This product also meets the essential requirements and other relevant provisions of the EMC Directive (2004/108/EC) and the LVD Directive (2006/95/EC). [. . . ]