User manual KAWAI FS650

[. . . ] · The illustration of the screen and the recorder shown in this manual may differ from the actual product. The utmost care has been taken to ensure the integrity of this document, but if you find a questionable item, error or omission, please contact our Customer Support Center. · Any liability for passive damages or damage of any kind occurred due to data loss incurred by a defect of the product, repair performed by the third party other than Olympus or an Olympus authorized service station, or any other reason is excluded. Trademarks and registered trademarks · Microsoft and Windows are registered trademarks of Microsoft Corporation. [. . . ] 4 · The display changes to [Partial erasing !] and erasing will start. · When [Partial erase completed. ] appears on the display, partial erase is complete. 2 Erasing Notes · If the ERASE button is not pressed within 8 seconds after the [Start point] and [End point] are alternately displayed, the recorder will revert to stop status. - Partial erasing is not possible on parts of files with a Verbal comment on them ( P. 31). - Files are inside a locked SD card. EN 27 Advanced operations Selecting folders and files Changing folders Displaying file information The recorder can display a variety of information related to the current file. 1 While the recorder is in stop mode, press the F1 (FOLDER) button. · The folder list screen will be displayed. 1 Select the file containing the information to display. 2 Press the +, ­ or F1 (FOLDER) button to select the folder, then press the OK/MENU button. 3 Selecting folders and files/ Displaying file information EN 2 Press the F3 (INFO) button. · The following information will be displayed: [Date] [Author ID] [ Work Type] Selecting a file 1 While the file is being displayed, press the 9 , 0 button. a b a Total number of recorded files in the folder b Current file number 28 Device lock function Access to the recorder can be restricted by using the Device Lock function. Password authentication can be safer for your data in case the recorder is lost. When the password has been registered, you will be asked for it on start-up. 3 After all four digits have been entered, press the F2 (ENTER) button. · If the 4 digit number entered matches the registered password then the start-up message will appear and the recorder will start-up. 1 Use the +, ­, 9 or 0 buttons to select a number. 3 Device lock function · The default password when using the ODMS software to set the password for the first time is "0000". 2 Press the OK/MENU button to set a number. · A [ ] will appear in the selected first digit and the flashing cursor will move to the next one over (to the right). · Pressing the ERASE button at any time will erase the last entry and move the cursor to the previous entry (to the left). Authentication halt mode If the password does not match after five consecutive tries, the recorder will enter into authentication halt mode for ten minutes. After ten minutes the password history will be deleted, and the recorder will return to the password input screen. EN 29 Setting the Author ID and Work Type Every file recorded on the recorder will include the Author ID and Work Type as part of its header information. To create multiple Author IDs and Work Types on the recorder, use the bundled ODMS software to create and upload a data list (list of Author IDs and Work Types) to the recorder. Setting an Author ID Setting the Work Type Up to 20 Work Types can be registered and uploaded to the recorder using the ODMS software. Work Types and Optional Items can be used on the recorder to populate the file header information. Pending When you set [Pending] to the file, the file becomes "Pending file". If "Download file" is set to "Finished file" by ODMS software, the [Pending] file is not transferred and only [Finished] file (edited file) will be transferred to your PC. [Pending]: Sets to a file of "Editing" and [ ] will appear on the display. File Lock The File lock function allows you to prevent important files from being accidentally erased. Work Type The Work Type information of the recorded or uploaded files can be edited with the menu settings of the recorder. For details, see " Editing the Work Type information" ( P. 39). Information The recorder can display a variety of information related to the current file. Rec Menu Mic Sense You can switch between two microphone sensitivities to meet recording needs: [Dictation] for oral dictation and [Conference] which is suited for situations like meetings and conferences with a small number of people. [Conference]: High-sensitivity mode that records sounds in all directions. Rec Mode You can choose between different recording formats. 3 Menu items 1 Select the recording format. [DSS]: DSS stands for Digital Speech Standard, a digital audio file format defined by a cooperative venture by Olympus and two other companies. [PCM ST ] (Stereo): This is an uncompressed audio format which is used for music CDs and the like. [MP3]: MPEG is the international standard established by a working group of the ISO (International Organization for Standardization). 2 Select the recording rate. When [DSS] is selected: [DSS Pro QP] (Quality Playback) or [DSS Pro SP] (Standard Playback) When [PCM ST] is selected: Recording rate will be fixed at 44. 1 kHz/16 bit. [. . . ] Used to record your own voice or people near you. s Connecting cord: KA333 Use to connect the microphone jack of the recorder to a radio or other sound source. s Telephone pickup: TP8 Earphone type microphone can be plugged into your ear while phoning. The voice or conversation over the phone can be clearly recorded. s 2-channel microphone (omni-directional): ME30W 5 Accessories (optional) EN Two ME30 monaural microphones come in a set with a miniature tripod and a connection adapter. These are highly sensitive omnidirectional microphones supported by plug-in power which are well-suited to recording musical performances. s Lithium ion battery: LI-42B This lithium ion rechargeable battery is manufactured by Olympus. It is best paired with the LI-42C battery charger. s Compact zoom microphone (unidirectional): ME32 The microphone is integrated with a tripod, making it suitable for when you wish to record from a distance, such as from your table at a meeting or conference. s AC adapter (5V): A517 In order to charge the battery, the docking station (CR15) will be necessary (optional). s Docking Station: CR15 s Highly sensitive noise-cancellation monaural microphone: ME52W This microphone is used to record sound at a distance while minimizing surrounding noise. 52 Specifications General points Overall frequency response 4 Recording format: DS2 (Digital Speech Standard Pro) Linear PCM (Pulse Code Modulation) MP3 (MPEG-1 Audio Layer3) 4 During recording mode (Microphone jack): DS2 format: [DSS Pro QP] [DSS Pro SP] 200 Hz to 7 kHz 200 Hz to 5 kHz 4 Recording media: microSD, SD card (512 MB to 32 GB) 4 Sampling frequency: DS2 format: [DSS Pro QP] [DSS Pro SP] 16 kHz 12 kHz Linear PCM format: [PCM ST] 50 Hz to 21 kHz MP3 format: [256kbps] 50 Hz to 20 kHz 50 Hz to 17 kHz Linear PCM format: [PCM ST] 44. 1 kHz [128kbps] MP3 format: [256kbps] [128kbps] 44. 1 kHz 44. 1 kHz 4 During recording mode (Built-in microphone): 20 Hz to 20 kHz (However, when recording in the MP3 format, the upper limit value of the frequency response depends on each recording mode) Guide to battery life The following values are strictly references. 5 Specifications 4 Speaker: Built-in ø23 mm round dynamic speaker 4 MIC/EAR jack: ø3. 5 mm mini-jack, impedance MIC 2 k, EAR 8 or more 4 Maximum working output (DC 3. 7 V): 235 mW (8 speaker) 4 During recording mode (Built-in microphone): DS2 format: [DSS Pro QP] [DSS Pro SP] Approx. [. . . ]