User manual KAWAI DX300

[. . . ] The GPL and LGPL licensed code in this product is distributed without any warranty. You may obtain the complete corresponding source code (as defined in the GPL) for the GPL Software, and/or the complete corresponding source code of the LGPL Software (with the complete machinereadable "work that uses the Library") for a period of three years after our last shipment of the product including the GPL Software and/or LGPL Software, which will be no earlier than December 1, 2011, either (1) for free by downloading it from http://support. Com/download; or (2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location where you want to have it shipped to, by sending a request to: KAWAITeK Computer Inc. , Beitou, Taipei 112 Taiwan In your request please provide the name, model number and version, as stated in the About Box of the product for which you wish to obtain the corresponding source code and your contact details so that we can coordinate the terms and cost of shipment with you. [. . . ] Do not save the BIOS file and BIOS Updater to a hard disk drive or USB flash drive in NTFS format. Turn off the computer and disconnect all SATA hard disk drives (optional). Insert the USB flash drive with the latest BIOS file and BIOS Updater to the USB port. When the KAWAI Logo appears, press <F8> to show the BIOS Boot Device Select Menu. Insert the support DVD into the optical drive and select the optical drive as the boot device. Please select boot device: SATA: XXXXXXXXXXXXXXXX USB XXXXXXXXXXXXXXXXX UEFI: XXXXXXXXXXXXXXXX Enter Setup and to move selection ENTER to select boot device ESC to boot using defaults 3. When the Make Disk menu appears, select the FreeDOS command prompt item by pressing the item number. At the FreeDOS prompt, type d: and press <Enter> to switch the disk from Drive C (optical drive) to Drive D (USB flash drive). C:\>d: D:\> 2-4 KAWAI DX300 Backing up the current BIOS To backup the current BIOS file using the BIOS Updater Ensure that the USB flash drive is not write-protected and has at least 4MB free space to save the file. At the FreeDOS prompt, type bupdater /o[filename] and press <Enter>. Rom Filename Extension The [filename] is any user-assigned filename with no more than eight alphanumeric characters for the filename and three alphanumeric characters for the extension. The default screen for entering the BIOS setup program can be changed. Selects the display language of the BIOS setup program Clicks to display all fan speeds if available Displays the CPU/motherboard temperature, CPU/5V/3. 3V/12V voltage output, CPU/chassis fan speed Exits the BIOS setup program without saving the changes, saves the changes and resets the system, or enters the Advanced Mode Selects the boot device priority Silent mode Standard mode Loads optimized default Turbo mode Selects the boot device priority Displays the system properties of the selected mode on the right hand side · The boot device options vary depending on the devices you installed to the system. ⷠThe Boot Menu(F8) button is available only when the boot device is installed to the system. 2-8 KAWAI DX300 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. Menu items Menu bar Configuration fields General help Pop-up window Scroll bar Navigation keys Menu items The highlighted item on the menu bar displays the specific items for that menu. The other items (Ai Tweaker, Advanced, Monitor, Boot, Tool, and Exit) on the menu bar have their respective menu items. Press <Esc> or use the USB mouse to click this button to return to the previous menu screen. Submenu items A greater than sign (>) before each item on any menu screen means that the item has a submenu. Chapter 2: BIOS information 2-9 Pop-up window Scroll bar Select a menu item and press <Enter> to display a pop-up window with the configuration options for that item. A scroll bar appears on the right side of a menu screen when there are items that do not fit on the screen. [. . . ] 2-24 KAWAI DX300 Appendices Federal Communications Commission Statement Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: · This device may not cause harmful interference. ⷠThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ]