User manual KAWAI CP187

[. . . ] Such software in this product is distributed without any warranty to the extent permitted by the applicable law. Where the applicable license entitles you to the source code of such software and/or other additional data, you may obtain it for a period of three years after our last shipment of the product, either (1) for free by downloading it from http://support. Com/download or (2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location where you want to have it shipped to, by sending a request to: KAWAITeK Computer Inc. , Beitou, Taipei 112 Taiwan In your request please provide the name, model number and version, as stated in the About Box of the product for which you wish to obtain the corresponding source code and your contact details so that we can coordinate the terms and cost of shipment with you. [. . . ] Insert the support DVD to the optical drive or the USB flash drive that contains the BIOS file to the USB port. When found, the utility reads the BIOS file and enters KAWAI EZ Flash 2 utility automatically. To ensure system compatibility and stability, we recommend that you press <F5> to load default BIOS values. This utility also allows you to copy the current BIOS file that you can use as a backup when the BIOS fails or gets corrupted during the updating process. Prepare the motherboard support DVD and a USB flash drive in FAT32/16 format and single partition. Download the latest BIOS file and BIOS Updater from the KAWAI website at http://support. Do not save the BIOS file and BIOS Updater to a hard disk drive or USB flash drive in NTFS format. Turn off the computer and disconnect all SATA hard disk drives (optional). Insert the USB flash drive with the latest BIOS file and BIOS Updater to the USB port. When the KAWAI Logo appears, press <F8> to show the BIOS Boot Device Select Menu. Insert the support DVD into the optical drive and select the optical drive as the boot device. The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance mode and boot device priority. To access the Advanced Mode, click Exit/Advanced Mode, then select Advanced Mode or press F7 hot key for the advanced BIOS settings. The default screen for entering the BIOS setup program can be changed. Selects the display language of the BIOS setup program Displays the CPU/motherboard temperature, CPU/5V/3. 248V Fan Speed CPU_FAN 3325RPM CHA_FAN1 N/A Speed : 2900 MHz Exits the BIOS setup program without saving the changes, saves the changes and resets the system, or enters the Advanced Mode Exit/Advanced Mode English System Performance Quiet Performance Energy Saving Normal Boot Priority Use the mouse to drag or keyboard to navigate to decide the boot priority. Shortcut (F3) Advanced Mode(F7) Boot Menu(F8) Default(F5) Quick access to a few utilities and advanced settings Selects the boot device priority Power Saving mode Normal mode Displays the system properties of the selected mode on the right hand side Loads optimized default KAWAI Optimal mode Selects the boot device priority Enters the Advanced Mode · The boot device options vary depending on the devices you installed to the system. ⷠThe Boot Menu(F8) button is available only when the boot device is installed to the system. KAWAI CP187 2-7 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. Submenu items Pop-up window Scroll bar Navigation keys Menu items The highlighted item on the menu bar displays the specific items for that menu. The other items (Ai Tweaker, Advanced, Monitor, Boot, Tool, and Exit) on the menu bar have their respective menu items. Press <Esc> or use the USB mouse to click this button to return to the previous menu screen. [. . . ] KAWAI CP187 2-29 2-30 Chapter 2: BIOS information Appendices Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: · This device may not cause harmful interference. ⷠThis device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ]