User manual KAWAI CP175

[. . . ] The GPL and LGPL licensed code in this product is distributed without any warranty. You may obtain the complete corresponding source code (as defined in the GPL) for the GPL Software, and/or the complete corresponding source code of the LGPL Software (with the complete machinereadable "work that uses the Library") for a period of three years after our last shipment of the product including the GPL Software and/or LGPL Software, which will be no earlier than December 1, 2011, either (1) for free by downloading it from http://support. Com/download; or (2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location where you want to have it shipped to, by sending a request to: KAWAITeK Computer Inc. , Beitou, Taipei 112 Taiwan In your request please provide the name, model number and version, as stated in the About Box of the product for which you wish to obtain the corresponding source code and your contact details so that we can coordinate the terms and cost of shipment with you. [. . . ] DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure!30 or later, the utility automatically exits to the DOS prompt after updating BIOS. ⷠEnsure to connect all SATA hard disk drives after updating the BIOS file if you have disconnected them. When you start up the computer, the system provides you with the opportunity to run this program. Press <Del> during the Power-On Self-Test (POST) to enter the Setup utility. If you wish to enter Setup after POST, press <Ctrl> + <Alt> + <Delete>, or press the reset button on the system chassis to restart the system. You can also turn the system off and then turn it back on to restart the system. ⷠThe BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen. ⷠIf the system becomes unstable after changing any BIOS setting, load the default settings to ensure system compatibility and stability. If the system fails to boot after changing any BIOS setting, try to clear the CMOS and reset the motherboard to the default value. The BIOS setup program is designed to make it as easy to use as possible. Configuration fields These fields show the values for the menu items. If an item is user-configurable, you can change the value of the field opposite the item. To change the value of a field, select it and press <Enter> to display a list of options. 3 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings. The Security menu items allow you to change the system security settings. ⷠIf you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC) RAM to clear the BIOS password. system Date System Time Security · The Administrator or User Password items on top of the screen show the default Not Installed. 2-10 KAWAI CP175 Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected fields in the BIOS setup program. From the Create New Password box, key in a password, then press <Enter>. [. . . ] Launch EFI Shell from filesystem device This option allows you to attempt to launch the EFI Shell application (shellx64. Operation is subject to the following two conditions: This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ]