User manual KAWAI CP155

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KAWAI CP155. We hope that this KAWAI CP155 user guide will be useful to you.


KAWAI CP155 : Download the complete user guide (8027 Ko)

You may also download the following manuals related to this product:

   KAWAI CP155 (2453 ko)

Manual abstract: user guide KAWAI CP155

Detailed instructions for use are in the User's Guide.

[. . . ] The GPL and LGPL licensed code in this product is distributed without any warranty. You may obtain the complete corresponding source code (as defined in the GPL) for the GPL Software, and/or the complete corresponding source code of the LGPL Software (with the complete machinereadable "work that uses the Library") for a period of three years after our last shipment of the product including the GPL Software and/or LGPL Software, which will be no earlier than December 1, 2011, either (1) for free by downloading it from http://support. Com/download; or (2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location where you want to have it shipped to, by sending a request to: KAWAITeK Computer Inc. , Beitou, Taipei 112 Taiwan In your request please provide the name, model number and version, as stated in the About Box of the product for which you wish to obtain the corresponding source code and your contact details so that we can coordinate the terms and cost of shipment with you. [. . . ] ErP Ready [Disbaled] This item allows user to switch off some power at S5 to get the system ready for ErP requirement. Configuration options: [Disabled] [Enabled] Restore AC Power Loss [Power Off] [Power On] [Power Off] [Last State] The system goes into on state after an AC power loss. The system goes into either off or on state, whatever the system state was before the AC power loss. Disables the PCIE devices to generate a wake-on-LAN feature of the Intel LAN device. Enables the PCIE devices to generate a wake-on-LAN feature of the Intel/ LAN device. Power On By PCIE [Disabled] [Disabled] [Enabled] Power On By RTC [Disabled] [Disabled] [Enabled] Disables RTC to generate a wake event. When set to [Enabled], the items RTC Alarm Date (Days) and Hour/ Minute/Second will become user-configurable with set values. 8 Network Stack UEFI BIOS Utility - Advanced Mode Exit Main Back Network Stack Ai Tweaker Advanced\ Network Stack > Advanced Monitor Boot Tool Disabled Link Enable/Disable the network stack (PXE and UEFI) Network Stack [Disable Link] This item allows user to disable or enable the UEFI network stack. configuration options: [Disable Link] [Enable] KAWAI CP155 3-25 Chapter 3 3. 6 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Scroll down to display the following items: Chassis Fan Profile Standard F10: Save ESC: Exit F12: Print Screen Chapter 3 3-26 Anti Surge Support Enabled Version 2. Chassis Lower Temperature [40] Displays the lower limit of the chassis temperature. Duty Cycle(%) [60] Use the <+> and <-> keys to adjust the minimum chassis fan duty cycle. When the chassis temperature is under 60ºC, the chassis fan will operate at the minimum duty cycle. Anti Surge Support [Enabled] This item allows you to enable or disable the Anti Surge function. configuration options: [Disabled] [Enabled] Chapter 3: BIOS setup 3. 7 Boot menu UEFI BIOS Utility - Advanced Mode Exit The Boot menu items allow you to change the system boot options. Wait For `F1' If Error [Enabled] [Disabled] [Enabled] Disables this function. The system waits for the <F1> key to be pressed when error occurs. Option ROM Messages [Force BIOS] [Force BIOS] [Keep Current] The third-party ROM messages will be forced to display during the boot sequence. The third-party ROM messages will be displayed only if the third-party manufacturer had set the add-on device to do so. KAWAI CP155 3-29 Chapter 3 Sets the power-on state of the NumLock to [On]. [. . . ] Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. iC: Canadian Compliance Statement Complies with the Canadian ICES-003 Class B specifications. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KAWAI CP155




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KAWAI CP155 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.