User manual JWIN JX-CD8500

[. . . ] JX-CD8500 STEREO HI-FI SYSTEM with 4 CD CHANGER / MP3 and AM/FM PLL SYNTHESIZED TUNER OWNER'S MANUAL JXCD8500V10M11EN05022005 PRECAUTIONS WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PRESENT BLADE EXPOSURE. CAUTION: To avoid electric shock, this unit must not be exposed to dripping or splashing water Minimum distances around the apparatus for sufficient ventilation; The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths curtains, etc. No naked flame sources, such as lighted candles, should be placed on the apparatus; Before scrapping the appliance, remove the batteries and place them in the appropriate battery collection container. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock persons. Warning: to reduce the risk of electric shock, do not remove cover (or back) no user-serviceable parts inside. Refer servicing to qualified service personnel. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION CLASS 1 LASER PRODUCT Use of Controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. LASER SAFETY This unit employs a laser. [. . . ] Changing a program position If a memory position needs to be replaced by a station other than the current one, the new station can be programmed as described above, and will replace the original station. Manual station selection Press button "TUNER / BAND" (7)/(53) repeatedly until the desired frequency band appears. Press the buttons "TUNING - or TUNING +" (20)/(43) or (18)/ (41) to tune to the desired radio stations and have them indicated in display (3). Briefly tapping the button "TUNING - or TUNING +" step by step alters the reception frequency upward or downward. The disc loader may only be opened or closed by pressing either the button "OPEN / CLOSE". Take care that no foreign objects can fall into the unit when the disc compartment is open. CD changer operation Switch the unit on by pressing the "POWER" button (1)/(32). To turn on the CD mode, press the button " PLAY / PAUSE" (13)/(38) or any one of the DISC 1-4 buttons (5) or (49). If one or more CD(s) have already been inserted in the chosen location(s), playback is started. Playing the entire CD Select the desired CD with the button "CD SELECTION 1 - 4" (5) or "DISC 1 - 4" (49) on the remote. Then close the disc compartment by pressing the "OPEN / CLOSE" button (15) or (16). After having closed the disc cover, the CD system immediately begins to scan the content of the compact disc. Subsequently, the number of tracks and the play-back time of the compact disc occupying position 1 appear in the display unit (3). To set the clock to the current time proceed as follows: 1. Enter the hour by pressing the buttons TUNING + SKIP/SEARCH or TUNING - SKIP/SEARCH. Enter the minutes by pressing the buttons TUNING + SKIP/SEARCH or TUNING - SKIP/SEARCH and confirm with MEM. /CLK ADJ. Set the switch-off time using the same procedure as switch-on time setting. Press DISPLAY MODE, as required to check the current time, Timer On, and Timer Off. 4. To switch to the clock display while in tuner and CD modes, press DISPLAY MODE. Setting the timer You can set automatic switch-on and switch-off times with the built-in timer. With the unit on, press DISPLAY MODE (17)/ (48), as required, until TIMER ON appears in the display. Use the TUNING + SKIP/SEARCH or TUNING - SKIP/SEARCH to set the hour of the desired switch-on time. When the unit is on standby it will automatically switch on for the programmed length of time. The unit automatically selects the operating mode (CD or TUNER) it was in when last switched off. Make sure the tuner is tuned to a radio station, or for CD operation, a CD must be inserted. [. . . ] After having closed the disc cover, the CD system begins immediately to scan the content of compact disc inserted. Afterwards, the number of tracks and the play-back time of the compact disc occupying position 1 appear in the display unit (3). 3. Press the "FOLDER" or button (24)/ (19) or (46)/(44) to select desired MP3 album. 13 14 4. Press the " TUNING + or TUNING -" button (18) or (20) to select desired track. [. . . ]