User manual JWIN JX-CD678 Instruction Manual

[. . . ] AVOID EXPOSURE TO BEAM This product contains a low power laser device. COMPLIANCE WITH FCC REGULATIONS This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are des igned to provide reas onable protection against harmful Interference in a residential installation. [. . . ] Rocket Launching pad. Mode No: Serial No: EN- 2 POWER SOURCES NORMAL BATTERIES / AC ADAPTOR Battery Power Operation 1. Open the battery compartment cover and insert two "AA" (UM-3) alkaline batteries (not included) inside the battery compartment. Close the battery compartment cover. AC Adaptor Operation ( AC adaptor not included ) Only use a 4. 5V/500mA DC, positive center pin power adapter. Make sure the local voltage corresponds to the adapter's voltage. Connect the power adapter to the 4. 5V DC jack of the player and to the wall outlet. 2 Note: When the unit is to be operated using batteries, always unplug the AC adaptor from the AC power outlet and the DC input jack from the set. For better performance and longer operating time, we recommend the use of alkaline batteries. (b) Do not mix alkaline, standard ( carbon-zinc ) or rechargeable (nickel-cadmium) batteries. If the unit is not to be used for an extended period of time, remove the batteries. Old or leaking batteries can cause damage to the unit and may void the warranty. 1 EN- 3 HEADPHONE AND HI-FI CONNECTION Listening with the headphones Connect the plug of the stereo headphones ( included ) into the PHONES ( GREEN ) socket. Connecting to component audio systems Connect the stereo connection cable ( not included ) into the LINE OUT ( BLACK ) socket of the unit and the CD / AUX inputs of an audio system. Note: Always switch the power off be fore ma king any con nection s between the player and another unit. Caution: Avoid excessive volume levels for a long period of time when using headphones, as this may impair your hearing. TO CD / AUX INPUT TO PHONES TO LINE OUT EN- 4 LOCATION OF CONTROLS 1 3 12 14 4 5 6 7 13 2 11 9 10 8 1. Press t he PLAY/PA USE but ton to start playing. To enhance the ba ss effec t Set t he BASS BOO ST swit ch to the ON position. Remove the disc Hold the edge and gently press the center pivot as illustrated, then pick up the disc. Note: The bass boost performance will be dependent on the VOLUME control setting. Turning Power on a nd off This unit h as no O N / OFF switch. To turn on : Press PLAY / PAUSE ( playback st arts ) To turn off : Press STOP button once for standby mode. Press STOP button again to turn of f t he power. Caution: Wait for the disc to stop rotating before pressing the OPEN butt on. [. . . ] O nce filled the buffer will give approximat ely 60 seconds of protection aga inst interrupt ion of sound out put . I f t he player is subject ed to shock or rolling of over 60 seconds duration some interruption of sound output will occur. This is normal and to be expected and t he sound will resume o nce t he player has stabilized from t he shock or rolling distu rban ces. [. . . ]