User manual JWIN JX-CD422

[. . . ] Positioning your appliance · Position the power supply lead and other leads so that they are not likely to be walked on or pinched by things placed on or against them. Do not place water filled objects, such as vases, on top of the appliance. · Make sure that no naked flame sources, such as candles, are placed on top of the appliance. Ventilation · The slots and openings on the appliance are for ventilation. [. . . ] When stereo signals are weak and the reception is noisy, it is often preferable to receive the program in mono. Switch the band selector to FM, reception will be less noisy. Aerial For best FM reception, extend the telescopic aerial located at the back of the unit. Move or rotate the unit to obtain the best medium wave reception. GB - 5 Using the CD player Handling Compact Discs Error compensation The unit has built in error compensation citcuits which enable it to keep playing despite any minor defects in the disc. However, if the defects are too great, the play may skip some tracks during play. If you encounter this problem play a new disc and if the CD player operates normally, the skipping problem is probably due to a defective disc. To remove a CD from its storage case, press down on the centre of the case and lift the disc out. Avoid touching the recorded side of the disc. Loading CDs · Set the Function Selector to CD position. · Press the " OPEN" pad on the top of the CD lid to click open. · Place the CD in the compartment with the label side facing upwards. · You can open the CD compartment at any time by pressing the stop button lifting the disc compartment lid. Keep the lid closed when not in use to prevent dirt and dust from getting into the mechanism. If a disc is deeply scratched or too dirty, it may not play. GB - 6 Playing CDs Once you have loaded a CD, press the CD Play/Pause button. Skip forward or back through tracks To select the next track, press >> Skip/ Search. If you are on the last track of the disc, the player will move to track 1. To go back to the beginning of the current track press << Skip/Search once. To play a particular track, load the disc in the CD player and press >> Skip/Search until the track number you want is shown in the display. To resume play, press the Play/Pause button again. Programmed track selection You can set the unit to play a selection of tracks from your disc. Press >> Skip/Search or << Skip/Search to display the track number you want. Now press << Skip/Search or >> Skip/ Search to display the next track you want. The first programmed track is displayed and your selection starts playing. After all the programmed tracks have been played, the CD player stops automatically and your programmed tracks are cleared. [. . . ] To record from the radio Set the Function Selector to Radio and tune in the AM/FM station you want. To start recording, press the Record and Play buttons at the same time. To start recording, press the Record and Play buttons at the same time. To stop recording, press the cassette Stop/ Eject button. Playing cassettes Once you have inserted a tape, press the Play button. [. . . ]