User manual JWIN JX-CD339 Instruction Manual

[. . . ] One that lets the sound come through loud and clear without annoying blaring or distortion - and most importantly, without affecting your sensitive hearing. Over time your hearing "comfort level" adapts to higher volumes of sound. So what sounds "normal" can actually be loud and harmful to your hearing. [. . . ] The rechargeable batteries (NOT supplied) should be recharged before they are used form the first time because they are low in power or if they have not been used for a long period (over 60 days) 1. Open the battery compartment cover and insert two of the recommended rechargeable batteries, matching polarity. (1. 2V 650mA) ALL BATTERIES MUST BE OF RECHARGEABLE NICKEL-CADMIUM OR NI-MH TYPE, OTHERWISE THE BATTERIES MAY EXPLODE OR LEAK. Plug in the AC adaptor (DC 4. 5V 500mA) and set the Recharge switch to ON position to start charging. Please unplug the AC adaptor and switch the Recharge switch to the OFF position. DOING SO CAN CAUSE THE PERFORMANCE OF THE RECHARGEABLE BATTERIES TO DETERIORATE. If the operating time decreases drastically even when the rechargeable batteries are properly recharged, purchase a new set of rechargeable batteries. When charging for the first time or after a long time, playing time may be reduced. In this case, charge and discharge the batteries several times. Note: When the unit is to be operated using batteries, always unplug the AC adaptor from the AC power outlet and the DC input socket from the set. (b) Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. If the unit is not to be used for an extended period of time, remove the batteries. Old or leaking batteries can cause damage to the unit and may void the warranty. EN-4 EN-5 HEADPHONE AND HI FI CONNECTION Listening with the headphones Connect the plug of the stereo headphones ( included ) into the PHONES ( GREEN ) socket. Caution: Avoid excessive volume levels for a long period of time when using headphones, as this may impair your hearing. BASIC DISC PLAY NOTE: This player plays not only commercial CDs but also self-compiled CD-R/RW disc. 6 Connecting to component audio systems Connect the stereo connection cable ( not included ) into the LINE OUT ( BLACK ) socket of the unit and the CD / AUX inputs of an audio system. Note: Always switch the power off before making any connections between the player and another unit. 1 3 2 1. [. . . ] Alternatively INTRO will start at the end of the current playing track. RANDOM Enables all the tracks on a disc to be played in a Random ( RAND ) sequence. For example : If "RAND" is selected while playing track 8, the random function will commence once track 8 has ended. When all tracks on a disc have been played the player will automatically stop and power down in approx. [. . . ]