User manual JWIN JX-CD1000

[. . . ] In certain case, the signal strength of the broadcast station may be weak or varying and this may cause excessive background noise. In these cases adjust the FM EXTERNAL antenna and/or places the RADIO WAVE BAND selector in the "FM" position. ANTENNA l l For FM reception there is a Wire Antenna at the rear of the unit. For AM/MW reception the signals are picked up through the built-in ferrite antenna. You may have to move or rotate the unit to obtain the best reception. 2 004AV1R. p65 2 2004/2/10, PM 04:07 What Discs? Only Discs displaying this symbol can be played on this unit. PLAYING COMPACT DISCS Loading and Unloading Compact Discs l l l l l l Press the Power / Stand-by button to turn the unit on. [. . . ] This problem may be caused by defects (such as scratches) in the disc being played, which are too large for the error compensation circuits to handle. TO STOP A CD AT MID. To temporarily stop disc play (pause mode), press the Play/Pause button. To resume disc play, press the Play button again. TRACK SKIP STARTING l D I S C PLAY FROM THE B E G I N N I N G OF A PARTICULAR TRACK Press the Forward ( ) or Reverse ( ) Search/Skip button to select the desired track. Press the Play button to start play. TO SKIP TO THE NEXT TRACK l l For example, to skip forward to the beginning of track 5 while track 4 is playing. Disc play will start at the The CD player will skip forward to the next track each time the Forward Search/Skip button ( ) is pressed. Repeatedly pressing the Forward Search/Skip button makes the CD player skip forward through the disc track by track. Once the beginning of the last track is reached the CD player will go to track 1. TO S K I P BACK TO THE P R E V I O U S TRACK l l For example to skip back to the beginning of track 3 while track 4 is playing. Disc play will start at the 4 004AV1R. p65 4 2004/2/10, PM 04:07 The CD player will skip back one track each time the Reverse Search/Skip button ( ) is pressed. If this button is pressed in the middle of a track, the CD player will skip back to the beginning of that track. To make it skip back to the previous track press the Reverse Search/Skip button twice. Once the beginning of the first track is reached, the CD player will go back to the last track. Notes: The Forward and Reverse Search/Skip buttons can be used to select a desired track to play from before disc play starts. In this case the number of the selected track will be displayed until the Play/Pause button is pressed. SEARCH During playback, press and hold the Forward Search/Skip or Reverse Search/Skip button will cause the player to scan through the current track. At the end of a track the player will skip to the next track and continue scanning. When the player reaches the end of the final track during Forward Search, or the beginning of the first track during Reverse Search, it will stop scanning. REPEAT DISC PLAY Use the Repeat button to listen to an entire disc, one track, or a programmed sequence repetitively. FOR REPEAT PLAY OF ONE TRACK Press the Repeat button once. Select the desired track by repeatedly pressing the Forward or Reverse Skip Track button . At which point it will automatically return to the beginning of that track. If the Repeat button is pressed 2 more times during play, the repeat indicator will go off, repeat play will end, and normal disc play will resume from that point. FOR REPEAT PLAY OF ALL THE TRACKS ON THE CD Press the Repeat button twice. The disc will then begin playing through to the end of the last track. At which point it will automatically return to the beginning of the first track. If the Repeat button is pressed once more, the repeat indicator will go off, repeat play will end, and normal disc play will resume from that point. When the last track has finished playing, the CD player will be set to the Stop mode. 5 004AV1R. p65 5 2004/2/10, PM 04:07 FOR REPEAT PLAY OF A PROGRAMMED S E Q U E N C E Enter a program track as described in the Programmed Dics Play. The CD will then begin playing through the sequence in the order in which they were programmed, to the end of the last programmed track. [. . . ] Then press the Stop/Eject key of the cassette deck. 7 004AV1R. p65 7 2004/2/10, PM 04:07 HEADPHONES Headphones should have a 3. 5mm diameter stereo plug and an impedance of 8-32 ohms. When headphones are connected, the speakers are automatically disconnected. SOUND CONTROLS The Bass Boost (BBS) button is used to enhance bass boost sound. REMOTE CONTROL TRANSMITTER 1. To record on a cassette with the tab broken, place a piece of adhesive tape over that hole. NOTE: When a tab is broken out, the RECORD button cannot be depressed 9 004AV1R. p65 9 2004/2/10, PM 04:07 CARE AND MAINTENANCE Care For Compact Discs l l l l l Treat the disc carefully. [. . . ]