User manual JWIN JL-616

[. . . ] OBJECT AND LIQUID ENTRY - Care should be taken so that objects do not fall and liquids are not spilled into the device's openings. CARTS AND STANDS - The appliance should be used only with a cart or stand that is recommended by the manufacturer. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn causing possible injury to the user and/or damage to the unit. [. . . ] DAMAGE REQUIRING SERVICE - The appliance should be serviced by qualified service professional when: a. Objects have fallen into, or liquid has been spilled into the appliance's apertures. The appliance does not appear to operate normally, or exhibits a change in performance. SERVICING - The user should not attempt to service the appliance beyond what is described in the user's operating instructions. All other servicing should be referred to qualified service professional. Disposal of these materials may be regulated by your local authorities due to environmental considerations. For more detailed disposal or recycling information, please contact your local authorities or the EIA (Electronic Industries Alliance) ­ http://www. eiae. org Additional Safety Instructions · When not in use, keep your device in a safe place where it will not be bent or crushed. -4- www. jWIN. com Digital Photo Frame V11M11_IM_EN_03212008 USER SAFETY GUIDE FCC Notice to U. S. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Select "Delete One", and press the SETUP button to confirm and delete the selected image. Select "Delete All" followed by the SETUP button to confirm and delete the all images. - 10 - www. jWIN. com Digital Photo Frame V11M11_IM_EN_03212008 OPERATIONAL INSTRUCTIONS Display Side In ON mode, press the SETUP button to enter the main menu, then press the UP or DOWN buttons to select Display Side or Display None. Select Side to display the photos and photo numbers. Effect In ON mode, press the SETUP button to enter the main menu, then press the UP or DOWN buttons to select Effect. (OFF will stop the function. ) Contrast In ON mode, press the SETUP button to enter the main menu, then press the UP or DOWN buttons to select Contrast (01-10). Press the SETUP button to enter. Light In ON mode, press the SETUP button to enter the main menu, then press the UP or DOWN buttons to select Light (01-10). Press the SETUP button to enter. - 11 - www. jWIN. com Digital Photo Frame V11M11_IM_EN_03212008 OPERATIONAL INSTRUCTIONS Info Display information on firmware version, memory status. Exit Exit from the main menu. Resetting To Reset, insert a pin or paper clip in the RESET pinhole. Using the Digital Photo Frame Tool Insert CD-ROM (included) to install program software. Open the Digital Photo Frame Tool for the following image. C A G D B - 12 - E F www. jWIN. com Digital Photo Frame V11M11_IM_EN_03212008 OPERATIONAL INSTRUCTIONS Photo Frame Tool-continued Interface instruction (see image on previous page) A. Download Window - Displays the images which will be downloaded to device. Displays the number of the images in download window/the number of the images in device/the total number of the images able to be stored in device. [. . . ] Download Preview Window Downloading Photos to the Digital Photo Frame 1. Crop tool (rectangular box) appears in Download Preview Window Note: Program automatically crops images to fit screen. To adjust the cropped image, use the frame tool in the Download Preview Window. [. . . ]