User manual JWIN JC-CD160 INSTRUCTION MANUAL
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual JWIN JC-CD160. We hope that this JWIN JC-CD160 user guide will be useful to you.
Manual abstract: user guide JWIN JC-CD160INSTRUCTION MANUAL
Detailed instructions for use are in the User's Guide.
[. . . ] Otherwise the mode will go back to the volume control mode.
Control Mode Volume control Bass control Treble control Balance control Fader control Turn clockwise: For less volume For less bass For less treble To decrease the right speaker volume To decrease the front speaker volume Turn counter clockwise: For more volume For more bass For more treble To increase the left speaker volume To increase the rear speaker volume
MUSIC
MUTE
LOUD
MONO
AF
PTY
EON
ST
LOC
LUD
60 WATT/DIGITAL TUNING SYSTEM
SCN
A/PS
1
LUD
2INT
3RPT
4RDM
5
6
MODE
CAR CD PLAYER ASP 12/45SEC RECEIVER(AM/FM) DETACHABLE FRONT PANEL
MENU KEY Hold the SEL key to choose the menu. 1) menu1: AUDIO DSP FUNCTION Press and hold longer than one second to activate the DSP feature. Rotate the SEL knob to select DSP mode sound effect as shown in sequence below . User setting value of bass/treble in normal mode is always memorized. In rock/classic/pops mode, bass/treble mode is skipped and level is not changeable FLAT----CLASSICS----POP M----ROCK M----DSP OFF. -- 1 --
LCD DISPLAY NORMAL FLAT ROCK CLASSIC POP DSP OFF FLAT M ROCK M CLASSIC M POP M
BASS (F=100HZ) X dB 0 dB 6 dB 2 dB -4 dB
MID (F=1KHZ) TREBLE (F=10KHZ) 0 dB 0 dB 0 dB 0 dB 0 dB X dB 0 dB 2 dB 2 dB -2 dB
8. [. . . ] 5) menu5:ESP12--45 OPTION While ANTI-SKIP PROTECTION FUNCTION (ASP) If in use, the player is likely to receive shocks or vibrations. The ANTI-SHOCK FUNCTION is active to provide uninterrupted playback. Should the player receive shocks for more than 45 seconds continuously in cd playback playback, the sound will mute for a very short while and will resume once the player has stabilised from the shock. LOUDNESS BUTTON -Press this button to boost the bass and treble response. Push the button again to return to normal operation. This function is useful when listening at low levels. Loudspeakers are ineffici ent at low power levels and will tend to sound flat. The loudness control will boost the bass and treble response thus giving a more lively performance. LCD DISPLAY -The liquid crystal display will display the current status of the unit. BAND SELECTOR SWITCH Press this switch to select the desired Radio band. Selection is made in regular sequence as FM-AM. AUTOMATIC OR MANUAL TUNING(FREQ UP>>OR FREQ DOWN<<) (A) RADIO MODE When pressed for less than 1 second, these keys operate as manual tuning mode. When pressed longer than 1 sec. , they are operated as SEEK tuning mode. (AUTO)
(B) CD PLAYER MODE When pressed for less than 1 second, these keys operate as TRACK UP or TRACK DOWN. When pressed longer than 1 sec. , they will operate as CUE or REVIEW mode.
-- 2 --
-- 3 --
REMOVING THE FRONT PANEL
CD CONTROL LOCATION OF PARTS
17 19 18
Front Panel
LUD
C D / C D - R / C D - R W PLAYE R
LUD
Release Button
PUSH SEL
DISP RPT RDM SCAN ALL DIR SONG
CLASSIC
BND
JAZZ
MUT
CLK
MUSIC
MUTE
LOUD
MONO
AF
PTY
EON
ST
LOC
LUD
INSTALLING THE FRONT PANEL
60 WATT/DIGITAL TUNING SYSTEM
SCN
A/PS
1
LUD
2INT
3RPT
4RDM
5
6
MODE
20
21
22
23
17. CD EJECT BUTTON Press the EJECT button to remove the CD. The receiver will automatically switch to radio mode. 18. CD SLOT 19. TRACK/SEARCH BUTTON FORWARD AND REVERSE TRACK SEARCH Press the SKIP button or during play to go to the desired track(song). ( . . . . REVERSE)( . . . . FORWARD) Press and hold the SKIP button or during play to scan the disc at high speed. When the desired music section of the disc is found, release the button. Normal play will resume. 20. PAUSE BUTTON During PLAY , press button to PAUSE. Press it again to resume play. 21. INT BUTTON (Priview all Tracks) This feature allowes you to listen to the first 10 seconds of each track on the display . Press the key SCAN indicator appears on the LCD pannel. 22. REPEAT BUTTON (RPT) To repeat the current track press the key. The RPT indicator appears on the LCD panel and the track be repeated continuously. To cancel the function the press the key again.
PRECAUTIONS
Do not touch the contacts on the front panel or on the unit body, since this may result in poor electrical conductivety. If dirt or other foreign substances get on the contacts, wiper them with a clean dry cloth.
PRECAUTIONS WHEN HANDLING THE FRONT PANEL
Do not leave the front panel in any area exposed to high temperatures or direct sunlight. [. . . ] Should this happen, press the reset button with a thin, pointed object to reset the microprocessor.
1
2
3
1
6 7 4 2 3 5
1. 6.
7.
Dashboard N ut (5mm) Spring washer Screw (5 x 16mm) Screw Strap B sure to use the strap to secure the e b ack of the unit of the place. Plain washer
FLASHING
RESET
SPECIFICATIONS
MW(AM) SECTION
1. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE JWIN JC-CD160
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual JWIN JC-CD160 will begin.