User manual INTEL DESKTOP BOARD DZ68BC

[. . . ] Intel Desktop Board DZ68BC Product Guide Order Number: G41105-002 Revision History Revision -001 -002 Revision History First release of the Intel Desktop Board DZ68BC Product Guide Second release of the Intel Desktop Board DZ68BC Product Guide Date August 2011 September 2011 Disclaimer INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL?S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for use in medical, life saving, or life sustaining applications. [. . . ] Connect the two cards together with the SLI bridge (Figure 22, C) as shown. Connect the monitor cable to the graphics card according to the manufacturer?s instructions. Figure 22. Installing Linked PCI Express Graphics Cards For more complete installation and configuration information refer to the documentation supplied by the graphics card manufacturer or visit their website. 47 Intel Desktop Board DZ68BC Product Guide Connecting SATA Cables SATA cables support the Serial ATA protocol. Each cable can be used to connect one internal SATA drive to the Desktop Board. Attach one end of the SATA cable to one of the SATA connectors on the board (Figure 23, A) and attach the other end of the cable to the SATA drive (Figure 23, B). Figure 23. Connecting SATA Cables 48 Installing and Replacing Desktop Board Components Connecting to the Internal Headers and Connectors Before connecting cables to any of the internal headers or connectors, observe the precautions in ?Before You Begin?Figure 24 shows the location of the internal headers and connectors on Intel Desktop Board DZ68BC. Figure 24. Internal Headers and Connectors 49 Intel Desktop Board DZ68BC Product Guide Front Panel Intel HD Audio Header Figure 24, A shows the location of the front panel Intel HD Audio header. Table 6 shows the pin assignments and signal names for the front panel Intel HD Audio header. Front Panel Intel HD Audio Header Signal Names Pin 1 3 5 7 9 Signal Name PORT 1L PORT 1R PORT 2R SENSE_SEND PORT 2L Pin 2 4 6 8 10 Signal Name GND PRESENCE# SENSE1_RETURN KEY (no pin) SENSE2_RETURN S/PDIF Header Figure 24, B shows the location of the S/PDIF output header. Table 7 shows the pin assignments and signal names for the S/PDIF connector. S/PDIF Header Signal Names Pin 1 2 3 4 Description Ground S/PDIF Out Key (no pin) +5 VDC IEEE 1394a Header Figure 24, C shows the location of the IEEE 1394a header. Table 8 shows the pin assignments and signal names for the IEEE 1394a header. IEEE 1394a Header Signal Names Pin 1 3 5 7 9 Signal Name TPA1+ Ground TPA2+ +12 V Key (no pin) Pin 2 4 6 8 10 Signal Name TPA1Ground TPA2+12 V Ground 50 Installing and Replacing Desktop Board Components Chassis Intrusion Header Figure 24, D shows the location of the chassis intrusion header. This header can be connected to a mechanical switch on the chassis to detect if the chassis cover is removed. This switch should be in the open position when the chassis cover is installed and closed when the cover is removed. Table 9 shows the pin assignments and signal names for the chassis intrusion header. Chassis Intrusion Header Signal Names Pin 1 2 Description Ground Intruder# Consumer IR (CIR) Headers The Desktop Board has two CIR headers: the input or receiver header (Figure 24, E) and the output or emitter header (Figure 24, F). The receiver header consists of a filtered translated infrared input compliant with Microsoft CIR specifications and a ?learning?The learning input is a high-pass input which the computer can use to ?learn?The emitter header consists of two output ports which the computer can use to emulate ?learned?infrared commands in order to control external electronic hardware. NOTE The Consumer IR option must be enabled in the system BIOS before it can function. [. . . ] Japan VCCI (Voluntary Control Council for Interference) mark. Korea Certification mark. Includes an adjacent KCC (Korean Communications Commission) certification number: KCC-REM-CPU-DZ68BC. Consists of a unique UL recognized manufacturer?s logo, along with a flammability rating (solder side). China RoHS/Environmentally Friendly Use Period Logo: This is an example of the symbol used on Intel Desktop Boards and associated collateral. [. . . ]