User manual INTEL DESKTOP BOARD DQ43AP

[. . . ] Intel Desktop Board DQ43AP Product Guide Order Number: E65070-001 Revision History Revision -001 Revision History First release of the Intel Desktop Board DQ43AP Product Guide Date March 2009 If an FCC declaration of conformity marking is present on the board, the following statement applies: FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For questions related to the EMC performance of this product, contact: Intel Corporation, 5200 N. E. Elam Young Parkway, Hillsboro, OR 97124 1-800-628-8686 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Replace the computer?s cover and reconnect the AC power cord. 40 Installing and Replacing Desktop Board Components Removing DIMMs To remove a DIMM, follow these steps: 1. Hold the DIMM by the edges, lift it away from the socket, and store it in an anti-static package. Reinstall and reconnect any parts you removed or disconnected to reach the DIMM sockets. Replace the computer?s cover and reconnect the AC power cord. 41 Intel Desktop Board DQ43AP Product Guide Connecting SATA Devices SATA cables support the Serial ATA protocol. Each cable can be used to connect a single SATA drive to the Desktop Board. Attach one end of the SATA cable to one of the black SATA connectors on the board (Figure 17, A). Attach the other end of the SATA cable to the SATA drive (Figure 17, B). Figure 17. Connecting a Serial ATA Cable To connect an eSATA drive you must use an adapter that cables from the red eSATA connector (Figure 1, Q) to a back panel connector. 42 Installing and Replacing Desktop Board Components Connecting to Internal Headers Before connecting cables to the internal headers, observe the precautions in ?Before You Begin?Figure 18 shows the location of the internal headers and connectors. Figure 18. Internal Headers 43 Intel Desktop Board DQ43AP Product Guide S/PDIF Header See Figure 18, A for the location of the S/PDIF header. Table 6 shows the pin assignments and signal names for the S/PDIF header. S/PDIF Header Pin 1 2 3 Signal Name Ground S/PDIF out VCC (5V) Front Panel Audio Header The front panel audio header (Figure 18, B) supports both Intel HD Audio and AC ?97 audio. Table 7 shows the pin assignments and signal names for HD Audio and Table 8 shows the pin assignments and signal names for AC ?97 Audio. Front Panel Audio Header Signal Names for Intel HD Audio Pin 1 3 5 7 9 Signal Name PORT 1L PORT 1R PORT 2R SENSE_SEND PORT 2L Pin 2 4 6 8 10 Signal Name GND PRESENCE# SENSE1_RETURN KEY (no pin) SENSE2_RETURN Table 8. Front Panel Audio Header Signal Names for AC ?97 Audio Pin 1 3 5 7 9 Signal Name MIC MIC_BIAS FP_OUT_R AUD_5V FP_OUT_L Pin 2 4 6 8 10 Signal Name AUD_GND AUD_GND FP_RETURN_R KEY (no pin) FP_RETURN_L 44 Installing and Replacing Desktop Board Components Serial Port Header See Figure 18, C for the location of the serial port header. Serial Port Header Signal Names Pin 1 3 5 7 9 Signal Name DCD TXD# Ground RTS RI Pin 2 4 6 8 10 Signal Name RXD# DTR DSR CTS No Connection Alternate Front Panel Power LED Header Figure 18, D shows the location of the alternate front panel power LED header. Pins 1 and 3 of this header duplicate the signals on pins 2 and 4 of the front panel header (Figure 18, E). If your chassis has a three-pin front panel power LED cable, connect it to this header. Table 10 shows the pin assignments for the alternate front panel power LED header. Alternate Front Panel Power LED Header Signal Names Pin 1 2 3 Description Front panel main color LED No pin Front panel alternate color LED Out In/Out Out Front Panel Header See Figure 18, E for the location of the multi-colored front panel header. Front Panel Header Signal Names Pin 1 3 5 7 9 Description Hard Drive Activity LED Hard disk LED pull-up to +5 V Out Hard disk active LED Reset Switch Ground Reset switch Power Power Out 10 No pin In 6 8 Ground Not Connected Out 2 4 In/Out Pin Description Power LED Front panel green LED Front panel yellow LED On/Off Switch Power switch In Out Out In/Out 45 Intel Desktop Board DQ43AP Product Guide USB 2. 0 Headers See Figure 18, F for the location of the USB 2. 0 headers. USB 2. 0 Header Signal Names USB Port A Pin 1 3 5 7 9 Signal Name Power (+5 V) DD+ Ground Key Pin 2 4 6 8 10 USB Port B Signal Name Power (+5 V) DD+ Ground No Connection Note: USB ports may be assigned as needed. NOTE Computer systems that have an unshielded cable attached to a USB port might not meet FCC Class B requirements, even if no device or a low-speed USB device is attached to the cable. [. . . ] Intel Desktop Board DQ43AP China RoHS Material Self Declaration Table 73 Intel Desktop Board DQ43AP Product Guide EMC Regulations Intel Desktop Board DQ43AP complies with the EMC regulations stated in Table 20 when correctly installed in a compatible host system. EMC Regulations Regulation (Class B) FCC 47 CFR Part 15, Subpart B ICES-003 Issue 4 EN55022:2006 Title Title 47 of the Code of Federal Regulations, Part 15, Subpart B, Radio Frequency Devices. (Canada) Limits and methods of measurement of Radio Interference Characteristics of Information Technology Equipment. (European Union) Australian Communications Authority, Standard for Electromagnetic Compatibility. [. . . ]