User manual INNOTEK ULTRASMART

[. . . ] Hold the collar one inch from the remote, taking care not to touch the metal contacts that touch your dog's skin. The collar will emit a start-up tone, and the light will glow solid green. To turn collar OFF, hold collar and remote one inch apart and press thetbutton. The collar will emit a shut-down tone, and the light will glow solid red, then go out. D NOTE: IUT-302 users, repeat the procedure with the second collar. [. . . ] NOTE: Cold temperatures may lead to premature low battery signal. Bbut Bcont Understanding the Collar The lightweight, comfortable electronic collar is integrated into a sleek, fashionable collar strap your dog wears. The collar produces a harmless yet effective stimulation and emits a training tone. The collar is waterproof and is safe for your dog to wear even while swimming. The collar is rechargeable; the collar's light glows red while charging and it glows green once charging is complete. Thetbutton sounds a tone in the collar. No stimulation is delivered when this button is pressed. The tone continues for as long as the button is held down. See table strengthen a dog's response to training. Tones can be used on page 6. as a warning tone prior to pressing the stimulation 4 Charging the Collar The collar charging station has been designed to plug into a standard 110v wall outlet and act as a charging stand for your collar. The collar fits in the cradle with the contacts facing down through the holes in the case. A built-in safety circuit prevents the unit from overcharging. The collar's light glows red when the collar is properly seated and charging; it will turn green when charging is complete. Frequent charging can have a negative effect on your collar's battery. ReadyTestTM feature When you remove the collar from the charging cradle, the unit will automatically go into self-test mode for about 8 seconds. The collar's internal diagnostics will check that the battery charge is full and that all circuits are working correctly. ReadyTestTM gives you added confidence that your collar is working and ready to go. If Continuous Red: If the ReadyTestTM self-test fails, the unit will tone and the LED will glow solid red for 20 seconds. If the unit continues to fail, call us at 1-800-826-5527. PerfectFitTM Test for Skin Contact When turning the collar ON, hold thetbutton for 3 seconds. The collar will emit a click tone as the contacts touch your dog's skin. To skip the PerfectFitTM test, just turn the collar ON by pressing thetbutton less that 3 seconds. Fitting the Collar The collar strap should fit snugly towards the top of your dog's neck with the collar unit on the bottom of the neck. You should be able to get one finger between the collar strap and your dog's neck. The metal contacts must make contact with the dog's skin for proper operation. A little hair thinning may be required; do not shave your dog's neck. Occasionally, check the tightness of the skin contacts to ensure they will not be lost from the collar. NOTE: If your dog is young and you expect him/her to grow, you'll want to leave excess strap to adjust the collar fastening. [. . . ] Just call our FREE Professional Training Support hotline at Warranty excludes: accidental damage due to dog chews; lightning damage where an INNOTEK® lightning protection component is not in use (inground pet fencing systems); or neglect, alteration and misuse. Invisible TechnologiesTM offers several product exchange options during the warranty period. If service is required, call 1-800-826-5527 to discuss the service plan that best serves your needs. Costs are dependent on the processing time and the desired shipping options. [. . . ]