User manual IBM 4232 MODEL 302
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual IBM 4232 MODEL 302. We hope that this IBM 4232 MODEL 302 user guide will be useful to you.
Manual abstract: user guide IBM 4232 MODEL 302
Detailed instructions for use are in the User's Guide.
[. . . ] 4232 Printer Model 302 User’s Guide
SA24-4386-01
4232 Printer Model 302 User’s Guide
SA24-4386-01
IBM
Note!Before using this information and the product it supports, be sure to read the general information under “Notices” on page ix.
|
Second Edition (September 1994)
| This major revision obsoletes and replaces SA24-4386-00 and Technical Newsletter | SN24-2028-00. Changes or additions to the text and illustrations are indicated by a | vertical line to the left of the change. Changes are made occasionally to the information herein; any such changes will be reported in subsequent revisions or Technical Newsletters. [. . . ] Grasp the brackets of the acoustic cover and insert them into the slots until they latch securely.
B ra c k e t P a p e r E x it A r e a B ra c k e t L a tc h
L a tc h
L a tc h e d P o s itio n L a tc h e d P o s itio n
R e a r V ie w
3. Pivot the acoustic cover until it is closed over the paper exit area.
Chapter 1. Setting Up the 4232 Printer Model 302
1-115
Attaching the 4232 Printer Model 302 to Your Computer
This section provides specific instructions on attaching the printer to your computer. Supported devices include: IBM Personal Computer IBM Personal System/2* IBM RISC System/6000* IBM AS/400* with ASCII controller IBM 4033 LAN Adapter.
|
IBM System/390
Connecting to the Parallel or Serial Interface
Parallel or serial cables are not shipped with your printer. If you do not have a cable, contact your IBM marketing representative. The following table provides the information you need to purchase the correct cable.
Interface Parallel Serial RS-232C Serial RS-422A Part Name Parallel Cable Serial Cable Serial Cable Part Number 1525612 8509386 70X8652 Cable Length 1. 8 m (6 ft) 6 m (20 ft) 15. 2 m (50 ft)
Attaching a Parallel Cable
CAUTION: Make sure the machine is turned Off (O) before you connect or disconnect the power cord or other cables. If the machine has cables other than the power cord, you must connect them before you plug the power cord into an outlet. You must first unplug the power cord from the outlet when you remove the other cables.
1-116
User’s Guide Model 302
To attach a parallel cable:
| | | | | | | |
1. Attach the adapter cable (IBM part number 04H5053) by pushing the cable connector into the printer port. Push the clips at each end of the connector into the notches on the adapter cable. Then attach the parallel interface cable to the end of the adapter cable. Push the clips at each end of the connector into the notches on the parallel cable.
A d a p te r C a b le IB M p a rt n u m b e r 04H 5053
P a r a lle l In te r fa c e C a b le
Chapter 1. The printer then displays
DIAGNOSTICS IN PROGRESS
<A>
DIAGNOSTICS COMPLETE
<A>
and READY <A>
Note: If the printer does not show the correct display sequence, go to the status code section of Appendix B, “Problem Solving. ” 7. Position the printer so that the front edge aligns with the front edge of your printer stand or table.
8. Refer to your computer system documentation for information on attaching the cable to your computer.
1-118
User’s Guide Model 302
Attaching a Serial Cable
CAUTION: Make sure the machine is turned Off (O) before you connect or disconnect the power cord or other cables. If the machine has cables other than the power cord, you must connect them before you plug the power cord into an outlet. You must first unplug the power cord from the outlet when you remove the other cables. Attach the serial interface cable by pushing the connector into the printer port.
2. Tighten the two locking screws to hold the cable in place.
Chapter 1. The printer then displays
DIAGNOSTICS IN PROGRESS
<A>
DIAGNOSTICS COMPLETE
<A>
and READY <A>
Note: If the printer does not show the correct display sequence, go to the status code section of Appendix B, “Problem Solving. ” 5. Position the printer so that the front edge aligns with the front edge of your printer stand or table.
6. Refer to your computer system documentation for information on attaching the cable to your computer.
1-120
User’s Guide Model 302
Chapter 2. [. . . ] A backing, usually cylindrical, against which printing mechanisms strike or otherwise deposit ink to produce an image. Cable that carries the main power supply between a room outlet and a machine. The custom set containing the values used to set the printer parameters when the printer is turned on. A series of diagnostic tests that are run automatically by a device when the power is turned On (|). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE IBM 4232 MODEL 302
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual IBM 4232 MODEL 302 will begin.