User manual HYUNDAI R210LC-7A BROCHURE

[. . . ] The cab's noise levels have been additionally reduced by improving the door seals for the cab and engine compartments. The use of an insulated engine compartment with sound-damping material also reduces noise. 1 2 3 Wide, Comfortable Operating Space Steel Cover Sunroof Dial Type Engine Speed Switch and / Key Switch Radio CD Control R210LC-7A_new_ALL_en 29-08-2007 15:33 Pagina 5 HYUNDAI CONSTRUCTION EQUIPMENT 04 / 05 R210LC-7A_new_ALL_en 29-08-2007 15:33 Pagina 6 Robex 210LC-7A Improved Intelligent Display Instrument Panel is installed in front of RH console box. It is easy to check all critical systems with easy-to-read indicators. Minimization of Shock and Vibration through Cab Mounting System The application of the Viscous Mounting system to the cabin support provides the operator with a smoother ride. The operator work efficiency will increase as the shock and noise level in the cabin decreases. Operating Environment Storage box and Cup Holder An additional storage box and cup holder are located behind operator's seat. [. . . ] of cylinder Bucket : 1-125 x 85 x 1, 055 mm (4. 9" x 3. 3" x 41. 5") bore x rod x stroke 2-Piece 1st : 2-120 x 85 x 1, 290 mm (4. 7" x 3. 3" x 50. 8") boom 2nd : 1-160 x 100 x 1, 040 mm (6. 3" x 3. 9" x 40. 9") Center frame Track frame No. of track guard on each side X - leg type Pentagonal box type 49 2 9 2 Operating Weight (approximate) Operating weight, including 5, 650 mm (18' 6") mono boom; 5, 560 mm (18' 3") 2-piece boom; 2, 920 mm (9' 7") arm, SAE heaped 0. 87 m3 (1. 14 yd3) backhoe bucket, lubricant, coolant, full fuel tank, hydraulic tank and the standard equipment. Drives & Brakes Drive method Drive motor Reduction system Max. travel speed(high) / (low) Gradeability Parking brake Fully hydrostatic type Axial piston motor, in-shoe design Planetary reduction gear 210 kN (46, 500 lbf) 5. 3 km/hr (3. 3 mph) / 3. 4 km/hr (2. 1 mph) 35° (70%) multi wet disc Major component weight Upperstructure Counterweight Mono Boom (with arm cylinder) 2-piece Boom (with arm/adjust cylinder) 5, 700 kg (12, 570 lb) 4, 700 kg (10, 360 lb) 1, 875 kg (4, 130 lb) 2, 650 kg (5, 950 lb) Operating weight Shoes (Triple grouser) Width mm (in) 500 (20) R210NLC-7A Operating weight Kg (lb) 22, 000 (48, 500) Ground pressure MPa (psi) 0. 055 (7. 96) Control Pilot pressure operated joysticks and pedals with detachable lever provide almost effortless and fatigueless operation. Pilot control Traveling and steering Engine throttle External Lights Two joysticks with one safety lever (LH): Swing and arm, (RH): Boom and bucket (ISO) Two levers with pedals Electric, Dial type Two lights mounted on the boom one under the battery box 600 (24) Standard equipment R210NLC-7A 22, 300 (49, 200) 0. 046 (6. 68) HYUNDAI CONSTRUCTION EQUIPMENT 12 / 13 R210LC-7A_new_ALL_en 26-11-2007 20:29 Pagina 14 Specifications R210LC/LR-7A Engine Model Type Rated flywheel horse power J1995 (gross) J1349 (net) 6271/1 (gross) 6271/1 (net) Cummins QSB6. 7 Water-cooled, 4 cycle Diesel, 6-Cylinders in line, direct injection, Turbocharged, Charged air cooled, Low emission 113 kW (151 HP) at 1, 900 rpm 107 kW (143 HP) at 1, 900 rpm 113 kW (153 PS) at 1, 900 rpm 107 kW (145 PS) at 1, 900 rpm 630 Nm (456 lbf. ft) at 1, 500 rpm 104 mm (4. 1 in) x 132 mm x (5. 2 in) 6, 700 cc (409 in3) 2 x 12 V x 100 AH 24 V - 4. 5 kW 24 V - 50 Amp Swing System Swing motor Swing reduction Swing bearing lubrication Swing brake Swing speed Axial piston motor Planetary gear reduction Grease-bathed Multi wet disc 12. 5 rpm SAE DIN Max. torque Bore x stroke Piston displacement Batteries Starting motor Alternator Coolant & Lubricant Capacity (refilling) Fuel tank Engine coolant Engine oil Swing device Final drive (each) Hydraulic system (including tank) Hydraulic tank liter 340 35 24 5 6 290 180 US gal 89. 8 9. 2 6. 3 1. 3 2 76. 6 47. 6 UK gal 74. 8 7. 7 5. 3 1. 1 1 63. 8 39. 6 Hydraulic system Main pump Type Two variable displacement piston pumps Max. flow 2 x 222 l/min (58. 1 US gpm / 48. 4 UK gpm) Sub-pump for pilot circuit Gear pump Cross-sensing and fuel saving pump system Hydraulic motors Travel Swing Relief valve setting Two speed axial piston motor with brake valve and parking brake Axial piston motor with automatic brake Undercarriage X-leg type center frame is integrally welded with reinforced boxsection track frames. The undercarriage includes lubricated rollers, idlers, track adjusters with shock absorbing spring and sprocket, and track chain with double or triple grouser shoes. Implement circuits 32, 4 MPa (4690 psi) Travel 32, 4 MPa (4690 psi) Power boost (boom, arm, bucket) 35, 3 MPa (5120 psi) Swing circuit 26, 0 MPa (3770 psi) Pilot circuit 3, 4 MPa (500 psi) Service valve Installed Hydraulic cylinders Boom : 2-120 x 85 x 1, 290 mm (4. 7" x 3. 3" x 50. 8") No. of cylinder Arm : 1-140 x 95 x 1, 460 mm (5. 5" x 3. 7" x 57. 5") bore x rod x stroke Bucket : 1-100 x 70 x 870 mm (3. 9" x 2. 8" x 34. 3") Center frame Track frame No. of track guard on each side X - leg type Pentagonal box type 49 2 9 2 Drives & Brakes Drive method Drive motor Reduction system Max. travel speed(high) / (low) Gradeability Parking brake Fully hydrostatic type Axial piston motor, in-shoe design RV Gear 210 kN (46, 500 lbf) 5. 3 km/hr (3. 3 mph) / 3. 4 km/hr (2. 1 mph) 35° (70 %) Multi wet disc Operating Weight (approximate) Operating weight, including 8, 200 mm (26' 11") boom; 6, 300 mm (20' 8") Arm, SAE heaped 0. 52 m3 (0. 68 yd3) backhoe bucket and 800 mm (32") triple grouser shoe, additional counterweight lubrificant, coolant, and full fuel tank, hyd tank and standard equipment. Major component weight Upperstructure Counterweight Attachment 5, 850 kg (12, 900 lb) 5, 300 kg (11, 680 lb) 4, 250 kg (9, 370 lb) Control Pilot pressure operated joysticks and pedals with detachable lever provide almost effortless and fatigueless operation. Pilot control Traveling and steering Engine throttle External Lights Two joysticks with one safety lever (LH): Swing and arm, (RH): Boom and bucket (ISO) Two levers with pedals Electric, Dial type Two lights mounted on the boom one under the battery box Operating weight Shoes (Triple grouser) width mm (in) 800 (32) Standard equipment Operating weight Kg (lb) 24, 500 (54, 000) Ground pressure MPa (psi) 0. 038 (5. 55) R210LR/LC-7A R210LC-7A_new_ALL_en 26-11-2007 20:29 Pagina 15 Backhoe attachment Buckets R210LC-7A (HC) SAE heaped m3(yd3) 0. 51(0. 67) 0. 80 (1. 05) 0. 92 (1. 20) 1. 10 (1. 44) 1. 20 (1. 57) 1. 34 (1. 75) 0. 74 (0. 97) 0. 90 (1. 18) 1. 05 (1. 37) 0. 87 (1. 14) 1. 20 (1. 57) 0. 75 (0. 98) Capacity m3 (yd3) SAE heaped 0. 51 (0. 67 ) 0. 80 (1. 05) 0. 92 (1. 20) 1. 10 (1. 44) 1. 20 (1. 57) 1. 34 (1. 75) 0. 74 (0. 97) 0. 90 (1. 18) 1. 05 (1. 37) 0. 87 (1. 14) 1. 20 (1. 57) 0. 75 (0. 98) Width mm (in) Without side cutters 700 (27. 6) 1, 000 (39. 4) 1, 150 (45. 3) 1, 320 (52. 0) 1, 400 (55. 1) 1, 550 (61. 0) 985 (38. 8) 1, 070 (42. 0) 1, 290 (50. 8) 1, 140 (44. 9) 1, 410 (55. 5) 1, 790 (70. 5) Recommendation mm (ft. in) Weight kg (lb) 570 (1, 260) 700 (1, 540) 770 (1, 700) 830 (1, 830) 850 (1, 870) 920 (2, 030) 770 (1, 700) 810 (1, 790) 890 (1, 960) 900 (1, 980) 1, 030 (2, 270) 880 (1, 940) : Applicable for materials with density of 2, 000 kg/m3 (3, 370 lb/yd3) or less : Applicable for materials with density of 1, 600 kg/m3 (2, 700 lb/yd3) or less : Applicable for materials with density of 1, 100 kg/m3 (1, 850 lb/yd3) or less Boom Arm 2, 000 (6' 7") 2, 400 (7' 10") 5, 680 (18' 8") 2, 920 (9' 7") 3, 900 (12' 10") CECE heaped 0. 45 (0. 59) 0. 70 (0. 92) 0. 80 (1. 05) 0. 96 (1. 26) 1. 00 (1. 31) 1. 15 (1. 50) 0. 65 (0. 85) 0. 80 (1. 05) 0. 92 (1. 20) 0. 75 (0. 98) 1. 00 (1. 31) 0. 65 (0. 85) With side cutters 820 (32. 3) 1, 120 (44. 1) 1, 270 (50. 0) 1, 440 (56. 7) 1, 520 (59. 8) 1, 670 (65. 7) - : Standard backhoe bucket : Heavy-duty : Rock bucket-Heavy duty : Slope finishing bucket Arms R210LC-7A (HC) Boom and arms are of all-welded, low-stress, full-box section design. 5. 68 m (18' 8") mono boom and 2. 0 m (6' 7"); 2. 4 m (7' 10"); 2. 92 m (9' 7"); 3. 90 m (12' 10") arm are available. Buckets are all-welded, high-strength steel implements. 2. 0 m (6' 7") 2. 40 m (7' 10") 2. 92 m (9' 7") 3. 90 m (12' 10") Digging force Arm Length Weight Bucket digging force mm(ft. in) kg(lb) kN kgf lbf kN kgf lbf kN kgf lbf kN kgf lbf 2, 000 (6' 7") 860 (1, 890) 133. 4 [145. 5] 13, 600 [14, 840] 29, 980 [32, 710] 152. 0 [165. 8] 15, 500 [16, 910] 34, 170 [37, 280] 135. 3 [147. 6] 13, 800 [15, 050] 30, 420 [33, 190] 142. 2 [155. 1] 14, 500 [15, 820] 31, 970 [34, 880] Standard arm 2, 400 (7' 10") 950 (2, 090) 133. 4 [145. 5] 13600 [14, 840] 29, 980 [32, 710] 152. 0 [165. 8] 15, 500 [16, 910] 34, 170 [37, 280] 112. 8 [123. 1] 11, 500 [12, 550] 25, 350 [27, 650] 117. 7 [128. 4] 12, 000 [13, 090] 26, 460 [28, 870] 2, 920 (9' 7") 990 (2, 180) 133. 4 [145. 5] 13, 600 [14840] 29, 980 [32710] 152. 0 [165. 8] 15, 500 [16910] 34, 170 [37280] 97. 1 [105. 9] 9, 900 [10800] 21, 830 [23810] 101. 0 [110. 2] 10, 300 [11240] 22, 710 [24770] 3, 900 (12' 10") 1, 200 (2, 650) 133. 4 [145. 5] 13, 600 [14, 840] 29, 980 [32, 710] 152. 0 [165. 8] 15, 500 [16, 910] 34, 170 [37, 280] 79. 4 [86. 6] 8, 100 [8, 840] 17, 860 [19, 480] 85. 3 [93. 0] 8, 700 [9, 490] 19, 180 [20, 920] Remark SAE ISO [ ]: Power Boost SAE Arm crowd force ISO Note : Arm weight including bucket cylinder and linkage. HYUNDAI CONSTRUCTION EQUIPMENT 14 / 15 R210LC-7A_new_ALL_en 26-11-2007 20:34 Pagina 16 Backhoe attachment Buckets R210NLC-7A SAE heaped m3(yd3) 0. 51 (0. 67) 0. 80 (1. 05) 0. 87 (1. 14) 0. 92 (1. 20) 1. 10 (1. 44) 1. 20 (1. 57) 1. 34 (1. 75) 0. 74 (0. 97) 0. 90 (1. 18) 1. 05 (1. 37) 0. 87 (1. 14) 0. 75 (0. 98) Capacity m3 (yd3) SAE heaped 0. 51 (0. 67) 0. 80 (1. 05) 0. 87 (1. 14) 0. 92 (1. 20) 1. 10 (1. 44) 1. 20 (1. 57) 1. 34 (1. 75) 0. 74 (0. 97) 0. 90 (1. 18) 1. 05 (1. 37) 0. 87 (1. 14) 0. 75 (0. 98) CECE heaped 0. 45 (0. 59) 0. 70 (0. 92) 0. 75 (0. 98) 0. 80 (1. 05) 0. 96 (1. 26) 1. 00 (1. 31) 1. 15 (1. 50) 0. 65 (0. 85) 0. 80 (1. 05) 0. 92 (1. 20) 0. 75 (0. 98) 0. 65 (0. 85) Width mm (in) Without side cutters 700 (27. 6) 1, 000 (39. 4) 1, 090 (42. 9) 1, 150 (45. 3) 1, 320 (52. 0) 1, 400 (55. 1) 1, 550 (61. 0) 985 (38. 8) 1, 070 (42. 0) 1, 290 (50. 8) 1, 140 (44. 9) 1, 790 (70. 5) : Rock bucket-Heavy : Slope finishing bucket With side cutters 820 (32. 3) 1, 120 (44. 1) 1, 210 (47. 6) 1, 270 (50. 0) 1, 440 (56. 7) 1, 520 (59. 8) 1, 670 (65. 7) - Weight kg (lb) 570 (1, 260) 700 (1, 540) 740 (1, 630) 770 (1, 700) 830 (1, 830) 850 (1, 870) 920 (2, 030) 770 (1, 700) 810 (1, 790) 890 (1, 960) 900 (1, 980) 880 (1, 940) Boom Arm Recommendation mm (ft. in) mono boom 5, 560 (18' 3") hyd. adjust boom 5, 650 (18' 6") 2, 000 2, 400 2, 000 2, 400 2, 900 (6' 7") (7' 10") (6' 7") (7' 10") (9' 6") - - : Standard backhoe bucket : Heavy-duty Bucket capacity R210LC/LR-7: 0. 22-0. 53 m3 (0. 29-0. 68 yd3) : Applicable for materials with density of 2, 000 kg/m3 (3, 370 lb/yd3) or less : Applicable for materials with density of 1, 600 kg/m3 (2, 700 lb/yd3) or less : Applicable for materials with density of 1, 100 kg/m3 (1, 850 lb/yd3) or less Arms R210NLC-7A Boom and arms are of all-welded, low-stress, full-box section design. 5. 65 m (18' 6") mono boom; 5. 56 m (18' 3") 2-piece boom and 2. 00 m (6' 7"); 2. 4 m (7' 10"); 2. 92 m (9' 6") arms are available. Buckets are all-welded, high-strength steel implements. Arms R210LC/LR-7A Boom and arms are of all-welded, low-stress, full-box section design. 8. 20 m (26' 11") boom; 6. 30 m (20' 8") arm are available. Buckets are all-welded, high-strength steel implements. 6. 3 m (20' 8") Long Reach Arm Overall length 2. 0 m (6' 7") 2. 4 m (7' 10") 2. 92 m (9' 6") 7, 280 mm (23' 11") 835 mm (2' 9") 1, 340 kg (2, 950 lb) Overall height Weight Digging force R210NLC-7A Arm Length Weight SAE mm(ft. in) kg(lb) kN kgf lbf kN kgf lbf kN kgf lbf kN kgf lbf 2, 000 (6' 7") 860 (1, 890) 133. 4 [145. 5] 13, 600 [14, 840] 29, 980 [32, 710] 152. 0 [165. 8] 15, 500 [16, 910] 34, 170 [37, 280] 135. 3 [147. 6] 13, 800 [15, 050] 30, 420 [33, 190] 142. 2 [155. 1] 14, 500 [15, 820] 31, 970 [34, 880] 2, 400 (7' 10") 950 (2, 090) 133. 4 [145. 5] 13, 600 [14, 840] 29, 980 [32, 710] 152. 0 [165. 8] 15, 500 [16, 910] 34, 170 [37, 280] 112. 8 [123. 1] 11, 500 [12, 550] 25, 350 [27, 650] 117. 7 [128. 4] 12, 000 [13, 090] 26, 460 [28, 870] 2, 900 (9' 6") 990 (2, 180) 133. 4 [145. 5] 13, 600 [14, 840] 29, 980 [32, 710] 152. 0 [165. 8] 15, 500 [16, 910] 34, 170 [37, 280] 97. 1 [105. 9] 9, 900 [10, 800] 21, 830 [23, 810] 101. 0 [110. 2] 10, 300 [11, 240] 22, 710 [24, 770] Arm Digging force R210LC/LR-7A Length mm (ft. in) kN kgf lbf kN kgf lbf kN kgf lbf kN kgf lbf 6, 300 (20' 8") 71. 9 7, 340 16, 180 83. 5 8, 510 18, 760 48. 9 4, 990 11, 000 49. 7 5, 070 11, 180 Remark Bucket digging force ISO Bucket digging force SAE ISO Arm crowd force SAE ISO Arm crowd force SAE [ ]: Power Boost ISO Note : Arm weight including bucket cylinder and linkage. 2-piece boom : Arm 2000 mm(6'7"), 2400 mm(7' 10") Standard arm R210LC-7A_new_ALL_en 29-08-2007 15:33 Pagina 17 Dimensions & Working ranges Dimensions R210LC-7A Tumbler distance Overall length of crawler Ground clearance of counterweight Tail swing radius Rear-end length Overall width of upperstructure Overall height of cab Min. ground clearance Track gauge Boom length Arm length Overall length Overall height of boom Track shoe width Overall width Standard Equipment Working ranges R210LC-7A Boom length Arm length Max. swing radius Standard Equipment HYUNDAI CONSTRUCTION EQUIPMENT 16 / 17 R210LC-7A_new_ALL_en 29-08-2007 15:33 Pagina 18 Dimensions & Working ranges Dimensions R210LC-7A High Chassis Tumbler distance Overall length of crawler Ground clearance of counterweight Tail swing radius Rear-end length Overall width of upperstructure Overall height of cab Min. ground clearance Track gauge Boom length Arm length Overall length Overall height of boom Type Track shoe width width Triple grouser Double grouser Overall width Standard Equipment Working ranges R210LC-7A High Chassis Boom length Arm length Max. swing radius Standard Equipment R210LC-7A_new_ALL_en 29-08-2007 15:33 Pagina 19 Dimensions R210NLC-7A Mono boom D, D' E 210NLC-7 210NLC-7A J F C G K H L A B I mm (ft in) mm (ft in) A B C D D' E F G H Tumbler distance Overall length of crawler Ground clearance of counterweight Tail swing radius Rear-end length Overall width of upperstructure Overall height of cab Min. [. . . ] reach Capacity Reach m (ft) *5510 *12150 *6360 *14020 *5090 *11220 *4700 *10360 *4500 *9920 *4360 *9610 *4200 *9260 *3950 *8710 *3430 *7560 *5510 *12150 *6360 *14020 4010 8840 2920 6440 2430 5360 2210 4870 2160 4760 2280 5030 2630 5800 4. 92 (16. 1) 4. 30 (14. 1) 6. 48 (21. 3) 7. 64 (25. 1) 8. 31 (27. 3) 8. 62 (28. 3) 8. 62 (28. 3) 8. 3 (27. 2) 7. 62 (25. 0 ) *10550 *23260 *10550 *23260 *9780 *21560 *9780 *21560 *6390 *14090 *6490 *14310 *7310 *16120 *8440 *18610 *9140 *20150 *8910 *19640 *7860 *17330 *5860 *12920 *6390 *14090 *6490 *14310 6830 15060 6230 13730 5730 12630 5500 12130 5470 12060 5590 12320 *5590 *12320 *5840 *12870 *6270 *13820 *6580 *14510 *6510 *14350 *5820 *12830 4430 9770 4280 9440 4030 8880 3790 8360 3630 8000 3590 7910 *5080 *11200 *5100 *11240 2780 6130 2680 5910 · Boom: 5. 56 m (18' 3") · Arm: 2. 40 m (7' 10") · Bucket : 0. 87m3 (1. 14 yd3) SAE heaped · Shoe: 500 mm (20") triple grouser shoe with 4, 700 kg (10, 360 lb) counterweight Load radius Load Point height m(ft) 10. 5 m 35 ft 9. 0 m 30. 0 ft 7. 5 m 25. 0 ft 6. 0 m 20. 0 ft 4. 5 m 15. 0 ft 3. 0 m 10. 0 ft 1. 5 m 5. 0 ft Ground Line -1. 5 m -5. 0 ft -3. 0 m -10. 0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb 3. 0 m(10. 0 ft) 4. 5 m(15. 0 ft) 6. 0 m(20. 0 ft) 7. 5 m(25. 0 ft) At max. reach Capacity Reach m (ft) *9540 *21030 *13100 *28880 *9240 *20370 *10990 *24230 *8250 *18190 *9540 *21030 11610 25600 *9240 *20370 10330 22770 *8250 *18190 *5270 *11620 *6040 *13320 *6870 *15150 *8050 *17750 *8940 *19710 *8990 *19820 *8190 *18060 *6480 *14290 *5270 *11620 *6040 *13320 *6870 *15150 6330 13960 5770 12720 5460 12040 5380 11860 5470 12060 *5220 *11510 *5560 *12260 *6050 *13340 *6450 *14220 *6510 *14350 *6020 *13270 *4670 *10300 4500 9920 4330 9550 4060 8950 3790 8360 3600 7940 3520 7760 3580 7890 *3280 *7230 *4940 *10890 *5040 *11110 *4920 *10850 2890 6370 2790 6150 2660 5860 2560 5640 *5490 *12100 *4670 *10300 *4360 *9610 *4200 *9260 *4080 *8990 *3960 *8730 *3760 *8290 *3370 *7430 *5490 *12100 3520 7760 2650 5840 2230 4920 2030 4480 1980 4370 2070 4560 2370 5220 5. 13 (16. 8) 7. 00 (23. 0) 8. 07 (26. 5) 8. 70 (28. 5) 9. 00 (29. 5) 8. 99 (29. 5) 8. 69 (28. 5) 8. 05 (26. 4) Lifting capacities R210LC/LR-7A Rating over-front Rating over-side or 360 degree · Boom: 8. 20 m (26' 11") · Arm: 6. 3 m (20' 8") · Bucket : 0. 52 m3 (0, 68 yd3) SAE heaped · Shoe: 800 mm (32") triple grouser shoe with 5, 300 kg (11, 680 lb) counterweight Load Point height m(ft) 9. 0 m (30. 0 ft) 6. 0 m (20. 0 ft) 3. 0 m (10. 0 ft) Ground Line -3. 0 m (-10. 0 ft) -6. 0 m (-20. 0 ft) -9. 0 m (-30. 0 ft) NOTES 3. 0 m (10. 0 ft) 6. 0 m (20. 0 ft) Load radius 9. 0 m (30. 0 ft) 12. 0 m (40. 0 ft) At max. reach Capacity Reach m (ft ) kg lb kg lb kg lb kg lb kg lb kg lb kg lb *4560 *10050 *5710 *12590 *7790 *17170 *8780 *19360 *4560 *10050 *5710 *12590 *7790 *17170 *8780 *19360 *4330 *9550 *5250 *11570 *5370 *11840 *4510 *9940 *4330 *9550 *5250 *11570 *5370 *11840 *4510 *9940 *1990 *4390 *2650 *5840 *3150 *6940 *3280 *7230 *2620 *5780 *1990 *4390 2430 5360 2140 4720 2060 4540 2260 4980 *830 *1830 *1430 *3150 *1670 *3680 *1980 *4370 *2220 *4890 *830 *1830 *1430 *3150 1630 3590 1440 3170 1310 2890 *1330 *2930 *1410 *3110 *1520 *3350 *1670 *3680 *1860 *4100 *2090 *4610 *1330 *2930 1160 2560 980 2160 930 2050 1020 2250 1330 2930 13. 11 (43. 0) 14. 37 (47. 1) 14. 89 (48. 9) 14. 75 (48. 4) 13. 92 (45. 7) 12. 25 (40. 2) 1. Lifting capacity of the Robex Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. [. . . ]