User manual HOOVER HWPD 610AMBC/1-S

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HOOVER HWPD 610AMBC/1-S. We hope that this HOOVER HWPD 610AMBC/1-S user guide will be useful to you.


HOOVER HWPD 610AMBC/1-S : Download the complete user guide (2481 Ko)

Manual abstract: user guide HOOVER HWPD 610AMBC/1-S

Detailed instructions for use are in the User's Guide.

[. . . ] We are proud to offer the ideal product for you and the best complete range of home appliances for your daily routine. Carefully read this manual for correct and safe appliance use and for helpful tips on efficient maintenance. WEEE contains both polluting substances (which can cause negative consequences for the environment) and basic components (which can be re-used). It is important to have WEEE subjected to specific treatments, in order to remove and dispose properly all pollutants, and recover and recycle all materials. [. . . ] The appliance calculates the time to the end of the selected programme based upon a standard loading, during the cycle, the appliance corrects the time to that applicable to the size and composition of the load. Press the START/PAUSE button again to re-start the programme from the point it had been paused at. CANCELLING THE SET PROGRAMME To cancel the programme, set the selector to the OFF position. Wait until the DOOR LOCKED light has gone out before opening the door. tEMPERATURE SELECTION button This button allows you to change the temperature of the wash cycles. When the display shows that the programme is finished and the DOOR LOCKED indicator light has gone out, the door can be opened. At the end of the cycle, switch off the appliance by turning the selector to OFF. It is not possible to raise the temperature over the maximum allowed for the programme, in order to protect the fabrics. The programme selector must be returned to the OFF position at the end of each cycle or when starting a subsequent wash cycle prior to the next programme being selected and started. By pressing this button, it is possible to reduce the maximum speed, and if you wish, the spin cycle can be cancelled. If the label does not indicate specific information, it is possible to use the maximum spin expected in the program. To prevent damage to the fabrics, it is not possible to increase the speed over the maximum allowed for the programme. To reactivate the spin cycle press the button until you reach the spin speed you would like to set. If the appliance detects the presence of excessive foam, it may exclude the spinning phase or extend the duration of the program and increase water consumption. It is possible to cancel the delay start by turning the programme selector to OFF. If there is a break in the power supply whilst the machine is operating, when the power is restored, the machine will restart from the beginning of the phase it was in when the power was lost. The option buttons should be selected before pressing the START/PAUSE button. rAPID / STAIN LEVEL button This button allows you to choose between two different options, depending on the selected programme. The machine is fitted with a special electronic device, which prevents the spin cycle should the load be unbalanced. This reduces the noise and vibration in the machine and so prolongs the life of your machine. dELAY START button This button allows you to pre-programme the wash cycle to delay the start of the cycle for up to 24 hours. To delay the start use the following procedure: - Select the required programme. [. . . ] If the error occurs again contact an Authorised Customer Service Centre directly. Water leaked on the floor near the washing machine The washing machine does not spin Strong vibrations / noises are heard during the spin cycle Make sure the product is plugged into a working supply socket. Make sure the wall socket is working, testing it with another appliance such as a lamp. Check whether the required program was correctly selected and the start button pressed. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HOOVER HWPD 610AMBC/1-S




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HOOVER HWPD 610AMBC/1-S will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.