User manual HAIER 21F3A
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HAIER 21F3A. We hope that this HAIER 21F3A user guide will be useful to you.
Manual abstract: user guide HAIER 21F3A
Detailed instructions for use are in the User's Guide.
[. . . ] Don't place the TV set in direct sunlight or near a heat source.
6. If the TV set is not going to be used for a long time, or there is a severe thunder & Lighting storm, it is recommended that the TV set be disconnected from the AC power outlet and the aerial plug removed.
Explanation on the display tube
Should the picture tube require cleaning, disconnect the power and use a dry soft cotton cloth. Do not use any cleaner or abrasive cloths.
Installation Aerial connection
For an optimum high quality picture, it is strongly advised that the TV set connect to an external aerial(s) using high quality coax cable. [. . . ] You can also use the buttons on the TV set to set channel.
Full automatic mode
TUNE
1 Press the TUNE menu button , till the TUNING menu shown on the right display on the screen.
TUNE COLOUR BAND SKIP PROGRAM SEARCH FINE TUNE AUTO SEARCH AUTO VHFL OFF 0
2 Press the CH+/- buttons to
CH+
select "AUTO SEARCH".
VOL+
VOL-
MENU
CH-
TUNE COLOUR BAND SKIP PROGRAM SEARCH FINE TUNE AUTO SEARCH
AUTO VHFL OFF 0
3 Press the VOL+ button to ensure automatic search function operates. All channels now playing program will be automatically preset in order . After the search has finished, the first program number will display on the screen.
CALL
Display function
Press the CALL button, then the channel number and the systems will be displayed on the screen.
4 AUTO BG
Searching channel Continued Semi-automatic search Semi-automatic search
1 Press the CH+/- buttons or PROGRAM NUMBER 0-9 buttons to choose desired channels I. E. channel 1
1 AUTO BG
TUNE
2 Press the TUNE menu button , till the TUNING menu shown on the right display on the screen.
3 Press the CH+/- buttons to
CH+
select " SEARCH".
VOL+
VOL-
MENU
CH-
TUNE COLOUR BAND SKIP PROGRAM SEARCH FINE TUNE AUTO SEARCH
AUTO VHFL OFF 0
4 Press the VOL-/+ buttons to start searching.
The VOL- down button is used for lower side program search. Repeat this step, till find the desired channel.
1
To turn off the on-screen menu
EXIT
In general, after you press the MENU button, the menu item display (PICTURE, TIME, FUNCTION, TUNE, EXCHANGE, ETC. ) will automatically disappear within 15 seconds. 3 Press the VOL-/+ buttons to turn the SKIP function "OFF".
Convenient picture and sound control functions Multiple picture modes How to select picture modes
P. STD
You can quickly select the desired picture mode from four preset modes and one customized mode.
STANDARD
Press the P. STD button to select the desired picture quality. Five kinds of picture modes (i. e. , "STANDARD", "RICH", "USER", "LISTEN",
RICH USER LISTEN
"SOFT" ) can be selected in turn. SOFT The 5 modes are Listen-This is a new feature that blacks out the TV screen when listening to music only channels; Soft-Designed for night time low light viewing; Standard -Designed for rooms that have good all round lighting; Rich-Designed for rooms with high ambient lighting such as daytime sport; User-A spare setting that can be adjusted to personal tastes.
How to customize your own picture status
PICTURE
1 Press the PICTURE menu button , till the PICTURE menu shown on the right display on the screen.
CH+
2 Press the CH+/- buttons to select the item to adjusted, then press the VOL-/+ buttons to obtain the desired effect.
VOL+
VOL-
MENU
PICTURE CONTRAST BRIGHTNESS COLOUR SHARPNESS *HUE BLACK STRETCH
48 32 48 40 60 OFF
CH-
ITEM
CONTRAST BRIGHTNESS COLUOR SHARPNESS *Hue
Press VOLWeak Dark Shallow Soft lean to purple
Press VOL+ Strong Bright Deep Sharp lean to green
Note: The "Hue" item only appears when the colour system is NTSC.
Convenient picture and sound control functions Continued
Black Stretch-(Automatically Increases the Contrast Rage) Noise Reduce - (Picture Noise & Grain Reduction Circuit. Only use on poor reception. )
Black stretch and noise reduce
PICTURE
How to select BLACK STRETCH
1 Press the PICTURE menu button , till the PICTURE menu shown on the right display on the screen.
CH+
VOL-
MENU
VOL+
2 Press the CH+/- button to select "BLACK STRETCH".
PICTURE CONTRAST BRIGHTNESS COLOUR SHARPNESS *HUE BLACK STRETCH
48 32 48 40 60 OFF
CH-
3 Press the VOL-/+ buttons to turn the BLACK STRETCH function "ON" or "OFF".
PICTURE CONTRAST BRIGHTNESS COLOUR SHARPNESS *HUE BLACK STRETCH
48 32 48 40 60 ON
How to select NOISE REDUCE
FUNCTION
1 Press the FUNCTION menu button, till the FUNCTION menu shown on the right display on the screen.
FUNCTION BACKGROUND NOISE REDUCE FADE CHILD LOCK AVL CALENDAR
ON ON ON OFF ON
CH+
2 Press the CH+/- buttons to select "NOISE REDUCE".
VOL+
VOL-
MENU
CH-
3 Press the VOL-/+ buttons to turn the NOISE REDUCE function "ON" or "OFF".
FUNCTION BACKGROUND NOISE REDUCE FADE CHILD LOCK AVL CALENDAR
ON OFF ON OFF ON
Convenient picture and sound control functions Continued Mute function Sound mute
1 Press the MUTE button on the remote control and "MUTE" type face will display on the lower part of the screen. 2 If you want to recover the sound, press the MUTE button again or directly press the VOL-/+ buttons.
MUTE
MUTE
Time functions Clock setting and timer on/off functions Clock setting
TIME
The clock will only work if the TV set if left turned on or in standby. When the set is disconnect from the power supply or is turned off by the main power on the front panel, the clock loses power and will need to be reset when the power is reconnected. 1 Press the TIME menu button, and the TIME menu display on the screen.
VOL+
CH+
VOL-
MENU
CH-
2Press the CH+/- buttons select "CLOCK", then press the VOL /+ buttons to adjust the time in hour position; press again the CH+/- buttons to select the time in minute position, then press the VOL -/ +buttons to adjust the value of minutes .
TIME CLOCK ON TIME ON PROG OFF TIME SLEEP TIMER REMIND TIME REMIND PROG
17:18 18:00 1 --:-0 --:-1
On/off timer
Using on/off timer function, the TV set can automatically turn on to a preset program or shut down in a preset time.
TIME
1 Press the TIME menu button to call up the TIME menu on the screen. 2 Press the CH+/- buttons to select "ON TIME", then press the VOL -/+ buttons to set the value in hour position; press again the CH+/- buttons to select the minute position and set the value of the minute. (take 18:00 as an example) 3 Press the CH+/- buttons to select "ON PROG", then press the VOL-/+ or program direct number buttons to select your desired channel (take 8 as an example). 4 Repeat step 1-2 to set OFF TIME. (take 23:00 as an example)
TIME CLOCK ON TIME ON PROG OFF TIME SLEEP TIMER REMIND TIME REMIND PROG
17:18 18:00 1 --:-0 --:-1
CH+
VOL-
MENU
VOL+
CH-
TIME CLOCK ON TIME ON PROG OFF TIME SLEEP TIMER REMIND TIME REMIND PROG
17:18 18:00 8 23:00 0 --:-1
Time functions Continued Sleep timer and program preset Sleep timer
The TV set have 18 sections option for sleep timer function (each section has a time interval of 10 minutes) (See right chart): 1 Press the TIME menu button, and the TIME menu display on the screen.
CH+
0 10 20
TIME
170 180
2 Press the CH +/- buttons to select "SLEEP TIMER".
VOL+
VOL-
MENU
3 Press the VOL -/+ buttons to adjust the SLEEP TIMER level.
CH-
TIME CLOCK ON TIME ON PROG OFF TIME SLEEP TIMER REMIND TIME REMIND PROG
17:18 18:00 8 23:00 120 --:-1
REMIND PROG function
Program remind timer, that displays an on-screen reminder prompt, when a program on a different channel is due to start.
TIME
1 Press the TIME menu button to call up the TIME menu on the screen. 2 Press the CH +/- buttons to select "REMIND TIME", then press the VOL -/+ buttons to set the value in hour position; press again the CH+/- buttons to select the minute position, and then set the value of the minute. (take 19:00 as an example)
TIME CLOCK ON TIME ON PROG OFF TIME SLEEP TIMER REMIND TIME REMIND PROG
17:18 18:00 8 23:00 120 19:00 1
CH+
VOL-
MENU
VOL+
CH-
3. Press the CH+/- buttons to select "REMIND PROG", then press the VOL -/+ buttons or the program direct number buttons to set the desired channel (take 18 as an example).
NOTE: For REMIND PROG to operate CHILD LOCK must be turned off.
TIME CLOCK ON TIME ON PROG OFF TIME SLEEP TIMER REMIND TIME REMIND PROG
17:18 18:00 8 23:00 120 19:00 18
Set up function Screen saver and childlock functions How to start screen saver function
When the BACKGROUD function is ON, the screen will turn automatically as shown "NO SIGNAL" of moving ( black background).
NO SIGNAL
FUNCTION
1 Press the FUNCTION menu button, till the FUNCTION menu shown on the right display on the screen. 2 Press the CH+/- buttons to select "BACKGROUND" and press the VOL-/+ buttons to turn the
CH+
VOL-
MENU
VOL+
FUNCTION BACKGROUND NOISE REDUCE FADE CHILD LOCK AVL CALENDAR
ON ON ON OFF ON
BACKGROUND function "ON" .
CH-
Child lock function
Enables the TV front control buttons to be locked.
FUNCTION
1 Press the FUNCTION menu button, till the FUNCTION menu shown on the right display on the screen. 2 Press the CH+/- buttons to select "CHILD LOCK" and press the VOL-/+ buttons to turn
CH+
VOL-
MENU
VOL+
CHILD LOCK function "ON" .
CH-
FUNCTION BACKGROUND NOISE REDUCE FADE CHILD LOCK AVL CALENDAR
ON ON ON OFF ON
NOTE: All the control panel buttons on the top of the TV are disabled when CHILD LOCK is turned on. The power switch will still turn the TV set off.
Set up function Continued AVL and calendar functions AVL function
Automatic Volume Limit control reduces effect of large volume changes such as when the ads come on.
FUNCTION
1 Press the FUNCTION menu button, till the FUNCTION menu shown on the right display on the screen.
CH+
FUNCTION BACKGROUND NOISE REDUCE FADE CHILD LOCK AVL CALENDAR
ON ON ON OFF ON
VOL-
MENU
VOL+
2 Press the CH+/- button to select "AVL" .
FUNCTION BACKGROUND NOISE REDUCE FADE CHILD LOCK AVL CALENDAR
CH-
3 Press VOL-/+ button to turn the AVL function "ON" or "OFF" .
ON ON ON OFF ON
FUNCTION
Calendar function
Enables the TV sets internal calendar to be set. [. . . ] Disturb Noise
Double or Triple Image
Normal
Volume Sound mute. Normal
No sound
No Picture
No sound
Ensure that the power supply is connected to the TV set and turned on. Also ensure that the TV set is not in "Listen Mode" or that the brightness and contrast are not turned down.
Adjust colour control No colour Normal volume
Adjust channel again
Scramble
Normal or Weak Volume
Colour Spot
Normal volume
Colour Purity fault which can be caused by moving the TV set, placing magnets near the TV screen or turning on/off house hold appliances such as vacuum cleaners near the TV set. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HAIER 21F3A
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HAIER 21F3A will begin.