User manual GYROS S032G

[. . . ] While all reasonable efforts have been made to make this document as accurate and helpful as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or completeness of the information contained herein. The most up-to-date drivers and manuals are available from: http://www. okiprintingsolutions. com Trademark Information ____________________________________________________ Oki and Oki Data are registered trademarks of Oki Electric Industry Company Ltd. Apple, Macintosh and Mac OS are registered trademarks of Apple Computers Inc. Hewlett-Packard, HP, and LaserJet are registered trademarks of Hewlett-Packard Company. [. . . ] In practice, however, they change according to the size of paper loaded in the tray. Sets the size of an area to draw when the host PC does not specify the size via the paper edit size designating command (Not valid for PS - only for PCL). Form Length Edit Size Cassette Size/ A3/A4 Short Edge/A4 Long Edge/A5/A6/B4/ B5 Short Edge/ B5 Longt Edge/ Legal14/ Legal13. 5/ Legal13/Tabloid/ Letter Short Edge/Letter Long Edge/ Executive/ Custom/Com-10 Envelope/DL Envelope/C5/C4/ 64 mm ~ 210 mm ~ 297 mm X Dimension Specifies paper width of Custom paper as a default value. Sets a paper size at right angles to the paper run direction. Y Dimension 105 mm ~ 297 mm ~ 1321 mm Specifies paper length of Custom paper as a default value. Sets a paper size in the same direction as the paper run direction. PS Setup Network Protocol ASCII/RAW Specifies PS communication protocol mode of data from NIC port. PS models only. Parallel Protocol ASCII/RAW Specifies PS communication protocol mode of data from Centronics port. PS models only. USB Protocol ASCII/RAW Specifies PS communication protocol mode of data from USB port. PS models only. Menu functions - C830 > 44 ITEM PCL Setup Font Source Font Number SETTINGS Resident I0 ~ I90 EXPLANATION Specifies the location of PCL default font. The valid range of this variable changes depending on the FONT SOURCE setting at the time. The maximum value is equal to the number of fonts installed in FONT SOURCE. Font Pitch 99. 9 CPI ~ 10. 00 CPI ~ 0. 44 CPI Width of the PCL default font in characters per inch (CPI). Sets the symbol set of PCL (see machine operator panel for complete list). This menu is enabled only when A4 paper is selected in the menu that sets the print width of A4 paper in portrait orientation. Ordinarily, the TRC compensation function holds control for the appropriate print density; thus 100% output is not always possible. The actual print, including the TRC compensation function is limited to an appropriate area. This function is for special purposes such as specification in CMYK color reduction in PS. CMYK Conversion On/Off Setting to "OFF" will simplify the conversion process of CMYK data, which will reduce the processing time. PS only Memory Setup Receive Buffer Size Auto 0. 5 megabyte 1 megabyte 2 megabyte 4 megabyte 8 megabyte 16 megabyte Sets the size of receive buffer Resource Save Auto Off 0. 5 megabyte 1 megabyte 2 megabyte 4 megabyte 8 megabyte 16 megabyte Sets the size of resource saving area. Menu functions - C830 > 49 ITEM HDD Setup SETTINGS EXPLANATION This item is displayed only if a HDD (option) is installed. Initialize Execute Initializes the HDD to the factory default setting. When this menu is executed, the following confirmation message appears. The request to execute HDD initialization is put into the memory and initialization will be executed at the next power cycle. If Yes is selected, shutdown takes place, and the HDD is initialized at power Off/On cycle. Menu functions - C830 > 50 ITEM HDD Setup (cont. ) Resize Partition SETTINGS PCL nn%/ Common mm%/ PSll%/<Apply> EXPLANATION Specifies the size of partition. nn, mm, ll: 1 - 98 and nn+mm+ll=100 The sizes are displayed in the partition list and can be changed by selecting the partition size to be changed. The request to execute the partition size change request is put into the memory and the hard disk initialization and partition size change will be executed at next power cycle. Hard disk initialization and partition size change will be executed at Power Off/On cycle. [. . . ] A3, A4 (LEF/SEF), A5, A6, B4, B5 (LEF/SEF), Legal 13/13. 5/14 inch, Letter, Executive, Banner (up to 1321mm length), com-10 envelope, DL envelope, C4/C5 envelope. Legal13/13. 5/14, Letter (LEF/SEF), Executive, A4 (LEF/SEF), B5 (LEF/SEF), A5, B4, A3, Tabloid, Custom Size (within width 148. 5-297mm and length 182-420mm / weight 64g/m2-105g/m2 limits) Plain, Letterhead, Transparency, Bond, Recycled, Card stock, Rough, Labels and Glossy Paper tray: 300 sheets approx. Face down: 250 sheets approx. Duplex (optional on some models) Media type Paper capacity (depending on paper weight) Exit capacity (depending on paper weight) Specifications > 92 ITEM Print accuracy SPECIFICATION Start: ±2 mm Paper skew: ±1 mm/100 mm Image expansion/compression: ±1 mm/100 mm USB specification Version 2. 0 Connection: USB type B Cable: USB specification version2. 0 (shielded) Transmission mode: High speed (480Mbps + 0. 25% maximum) 10 Base T, 100 Base TX 36 pin Centronics type, receptacle - IEEE 1284-1994 50, 000 pages per month max. , 10, 000 pages per month average 100. 000 pages 20 minutes Starter: CMYK: 2, 000 images (750 images used to initially charge image drum) Replacement: CMYK: 8, 000 images Interfaces Universal Serial Bus (USB) Network Parallel Interface (830 only) Duty cycle MTBF MTTR Toner lifeb Image drum life Belt life Fuser life Power supply Power consumption 20, 000 Letter/A4 pages average 80, 000 Letter/A4 pages at 3 pages per job100, 000 Letter/A4 pages at 3 pages per job220 to 240VAC @ 50/60 Hz ± 2% Operating: 1350W peak; 570 W av. (25°C) Idle: 200 W typical (25°C) Power saving c: <15W (C810)<17W (C830) Operating environment Operating 10 to 32 °C/20 to 80% RH (optimum 25 °C wet, 2 °C dry) Off: 0 to 43 °C/10 to 90% RH (optimum 26. 8 °C wet, 2 °C dry) Print environment 30 to 73% RH @ 10 °C; 30 to 54% RH @ 32 °C 10 to 32 °C @ 30% RH; 10 to 27 °C @ 80% RH color 17 to 27 °C @ 50 to 0% RH Noise Levels Operating: Mono/color - less than 54dBa Standby Mode: less than 37dBa Power Saving Mode: Background level a. [. . . ]