User manual GRADAV FOCUSHAND 2
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual GRADAV FOCUSHAND 2. We hope that this GRADAV FOCUSHAND 2 user guide will be useful to you.
Manual abstract: user guide GRADAV FOCUSHAND 2
Detailed instructions for use are in the User's Guide.
[. . . ] FocusHAND 2
The focusHAND 2 is a wireless system designed to remotely operate dimming controlled by DMX512 to ease and speed up focusing. [. . . ] Power consumption is minimal, for commands are transmitted only when the key is pressed. To change the key illumination time: 1 2 3 4 5
1
Up
KEY FUNC @ ENTER
TIME 5 seconds 12 seconds 25 seconds Always on
switch off the remote unit using the slide switch press and hold either FUNC, @ , or ENTER switch on the remote unit wait until the keys start to blink ( 5 seconds) release the key
2 5 8 + 3 6 9 Enter Func
4
Down
@
Operation To ACTIVATE the Remote press [+] [+] [ENTER] This transfers control to the Remote and disables commands from the lighting board. To DEACTIVATE the Remote press [-] [-] [ENTER] This transfers control from the Remote back to the lighting board. In case of mains failure the Base Unit automatically returns control to the lighting board.
7
Next
0
Prev
Keypad layout
Please see over for keypad dimmer operation.
Keypad Dimmer Operation
Action Required Single Dimmer at Full Single Dimmer at a percentage
In 10% steps
Key-Presses Channel number, Enter Channel number, @, [1. . . 9] @, [0. . . 9] [ , [-], [+] combination
Examples [1] [2] [ENTER]
Channel 12 at 100%
[7] [@] [5]
Channel 7 at 50%
Adjust Output level
This command affects all selected channels
[@] [4]
All dimmer outputs at 40%
Selecting a group of dimmers
can be used in [1] [ ] [6] [ENTER]
Channels 1 to 6 selected
[4] [+] [9] [+] [1] [0] [ENTER]
Channels 4, 9 and 10 selected
[1] [ ] [6] [+] [9] [ENTER]
Channels 1 to 6 and 9 selected
[1] [ ] [6] [-] [4] [ENTER]
Channels 1, 2, 3, 5 and 6 selected
Adding dimmers
Use [+] followed by channel [+] [7] [ENTER] Adds channel 7 to the existing selection numbers. [+] [1] [ ] [6] [ENTER]
Adds channels 1 to 6 to the existing selection
Removing dimmers
Use [-] followed by channel [-] [5] [ENTER] numbers. Removes channel 5 from the selection [-] [4] [ ] [1] [0] [ENTER]
Removes channels 4 to 10 from the selection
Remove all dimmers Toggle between the current and last selections
[0], Enter Press [Enter] alone
[0] [ENTER] [ENTER]
Return to last selection
Press the [FUNC] key to access the alternate functions on the keys in the left-hand column. [. . . ] New channel at level setting in force.
Releases Function operation
and returns keys to normal.
Gradav Hire & Sales Ltd
Unit C6 Hastingwood Trading Estate Harbet Road, London N18 3HU
Phone 020 8803 7400 FAX 020 8803 5060 email web office@gradav. co. uk www. gradav. co. uk [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE GRADAV FOCUSHAND 2
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual GRADAV FOCUSHAND 2 will begin.