User manual EDIROL R-4

[. . . ] Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" and "IMPORTANT NOTES" (p. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner's Manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. [. . . ] Use the [NEXT] button or the [SHUTTLE] dial to find the location at which you want to assign a marker. Play, fast-forward, or rewind the project to the location at which you want to assign a marker. Marks are numbered sequentially starting at the beginning of the project. Number of markers in the project Marker information Number of markers you've passed When you've assigned one or more markers, proceed as follows. CLEAR button Deletes the marker you specified using the [Mark] buttons. Marks are deleted consecutively, starting with the marker immediately before the current location. Simply assign points A and B during playback, and the playback will repeat between points A and B. The [A-B REPEAT] button will blink, and that location will be remembered as the starting point (A) for repeat playback. * If, after assigning point A, you press the STOP button before assigning point B, point A will be cleared. The [A-B REPEAT] button will change from blinking to solidly lit, and that location will be remembered as the end point (B) for repeat playback. Playback will automatically repeat between the points you specified in steps 1 and 2. To cancel repeat playback, press the [A-B REPEAT] button when points A and B have already been assigned. The [A-B REPEAT] button will go out, and repeat playback will be cancelled. * If, after assigning point A, you press the STOP button before assigning point B, point A will be cleared. * If the song plays all the way to the end after you've assigned point A, playback will repeat between point A and the end of the song. * If you press the [STOP] button during repeat playback, playback will stop and the repeat region (A-B) settings will be cleared. If there are numerous folders or projects within folders, you can use the Finder screen to select the project that you want to play. In this screen you can also perform operations such as deleting an unwanted project or copying a project to a CompactFlash card. If the desired project is in a folder, the hard disk (HD), or the CompactFlash card (CF), you can press the [CURSOR] right button to move into the selected folder (i. If you want to move back to the upper-level folder, press the [CURSOR] left button. When the screen at right appears, use the [CURSOR] buttons to choose 1 Select. Alternatively, with a project selected (step 2), you can press the [PLAY] button (instead of pressing the [ENTER] button) to play the selected project. [. . . ] It's also possible that the batteries have run down, so you should obtain a new set of batteries. Refer to: "Connecting the AC adaptor and turning the power on" (p. If a folder contains a large number of files, operation will be sluggish when you open the Finder, and the screen will not scroll easily. If there is a large number of files, operations in the Finder will take more time. [. . . ]