User manual ECS L7VTA2
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ECS L7VTA2. We hope that this ECS L7VTA2 user guide will be useful to you.
Manual abstract: user guide ECS L7VTA2
Detailed instructions for use are in the User's Guide.
[. . . ] Preface
Copyright
This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author. Version 1. 0a
Disclaimer
The information in this document is subject to change without notice. The manufacturer makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. [. . . ] If your mainboard has a Flash BIOS jumper, reset the jumper to protect the newly installed BIOS from being overwritten.
Using BIOS
When you start the Setup Utility, the main menu appears. The main menu of the Setup Utility displays a list of the options that are available. When an option is highlighted, execute the option by pressing <Enter>. Some options lead to pop-up dialog boxes that prompt you to verify that you wish to execute that option. Some options (marked with a triangle ) lead to submenus that enable you to change the values for the option. Submenu items are denoted by a triangle .
Standard CMOS Features
In the Standard CMOS menu you can set the system clock and calendar, record disk drive parameters and the video subsystem type, and select the type of errors that stop the BIOS POST.
Phoenix AwardBIOS CMOS Setup Utility Standard CMOS Features Date (mm:dd:yy) Time (hh:mm:ss) IDE Primary Master IDE Primary Slave IDE Secondary Master IDE Secondary Slave Drive A Drive B [EGA/VGA] Halt On Base Memory Extended Memory Total Memory
: Move Enter : Select F5:Previous Values
Tue, July 11 2001 12 : 8 : 59
Item Help Menu Level Change the day, month, year and century.
[1. 44M, 3. 5 in. ] [None] Video [But keyboard] 640K 31744K 32768K
+/-/PU/PD:Value: F10: Save ESC: Exit F1:General Help F6:Fail-Safe Defaults F7:Optimized Defaults
Date and Time
The Date and Time items show the current date and time on the computer. If you are running a Windows OS, these items are automatically updated when28
ever you make changes to the Windows Date and Time Properties utility.
IDE Devices (None)
Your computer has two IDE channels (Primary and Secondary) and each channel can be installed with one or two devices (Master and Slave). Press <Enter> to display the IDE submenu:
Phoenix AwardBIOS CMOS Setup Utility IDE Primary Master IDE HDD Auto-Detection IDE Primary Master Access Mode Capacity Cylinder Head Precomp Landing Zone Sector
: Move Enter : Select F5:Previous Values
[Press Enter] [Auto] [Auto] 0 MB 0 0 0 0 0
Item Help Menu Level To auto-detect the HDD's size, head . on this channel
+/-/PU/PD:Value: F10: Save ESC: Exit F1:General Help F6:Fail-Safe Defaults F7:Optimized Defaults
IDE HDD Auto-Detection Press <Enter> while this item is highlighted to prompt the Setup Utility to automatically detect and configure an IDE device on the IDE channel. Note: If you are setting up a new hard disk drive that supports LBA mode, more than one line will appear in the parameter box. IDE Primary/Secondary Master/Slave Leave this item at Auto to enable the system to automatically detect and configure IDE devices on the channel. If it fails to find a device, change the value to Manual and then manually configure the drive by entering the characteristics of the drive in the items described below. Refer to your drive's documentation or look on the drive casing if you need to obtain this information. Note: Before attempting to configure a hard disk drive, ensure that you have the configuration information supplied by the manufacturer of your hard drive. Incorrect settings can result in your system not recognizing the installed hard disk. Access Mode This item defines ways that can be used to access IDE hard disks such as LBA (Large Block Addressing). Leave this value at Auto and the system will automatically decide the fastest way to access the hard disk drive. Press <Esc> to return to the Standard CMOS Features screen.
29
Drive A/Drive B (1. 44M, 3. 5 in. /None)
These items define the characteristics of any diskette drive attached to the system. You can connect one or two diskette drives.
Floppy 3 Mode Support (Disabled)
Floppy 3 mode refers to a 3. 5-inch diskette with a capacity of 1. 2 MB. Floppy 3 mode is sometimes used in Japan.
Video (EGA/VGA)
This item defines the video mode of the system. This mainboard has a built-in VGA graphics system; you must leave this item at the default value.
Halt On (But keyboard)
This item defines the operation of the system POST (Power On Self Test) routine. You can use this item to select which types of errors in the POST are sufficient to halt the system.
Base Memory, Extended Memory, and Total Memory
These items are automatically detected by the system at start up time. [. . . ] Some software is installed in separate folders for different operating systems, such as DOS, WIN NT, or WIN98/95. To install the software, execute a file named SETUP. EXE or INSTALL. EXE by double-clicking the file and then following the instructions on the screen. Exit The Exit button closes the Auto Setup window.
Application Tab
Lists the software utilities that are available on the CD.
Read Me Tab
Displays the path for all software and drivers available on the CD.
Running Setup
Follow these instructions to install device drivers and software for the mainboard: 1. The installation program begins:
Mainboard ID
52
Note: The following screens are examples only. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ECS L7VTA2
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ECS L7VTA2 will begin.