User manual ECS 649-M2

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ECS 649-M2. We hope that this ECS 649-M2 user guide will be useful to you.


ECS 649-M2 : Download the complete user guide (2304 Ko)

Manual abstract: user guide ECS 649-M2

Detailed instructions for use are in the User's Guide.

[. . . ] iii iv Preface Copyright This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author. Version 1. 0b Disclaimer The information in this document is subject to change without notice. The manufacturer makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. [. . . ] System BIOS Cacheable (Disabled) This item allows the system to be cached in memory for faster execution. Video RAM Cacheable (Disabled) These items allow the video BIOS and RAM to be cached in memory for faster execution. Enable these items for better performance. · Using BIOS 37 Integrated Peripherals These options display items that define the operation of peripheral components on the system's input/output ports. Phoenix-AwardBIOS CMOS Setup Utility Integrated Peripherals OnChip IDE Device OnChip PCI Device Onboard SuperIO Device Onboard 1394 Device Onboard LAN Device Onboard LAN Boot ROM IDE HDD Block Mode [Press Enter] [Press Enter] [Press Enter] [Enabled] [Enabled] [Disabled] [Enabled] Item Help Menu Level : Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults OnChip IDE Device (Press Enter) Scroll to this item and press <Enter> to view the following screen: Phoenix-AwardBIOS CMOS Setup Utility SiS OnChip IDE Device InternalPCI/IDE IDE Primary Master PIO IDE Primary Slave PIO IDE Secondary Master PIO IDE Secondary Slave PIO Primary Master UltraDMA Primary Slave UltraDMA Secondary Slave UltraDMA Secondary Slave UltraDMA IDE DMA Transfer Access [Both] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Enabled] Item Help Menu Level : Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults Internal PCI/IDE (Both) Use these items to enable or disable the internal PCI IDE channels that are integrated on the mainboard. IDE Primary/Secondary Master/Slave PIO (Auto) Each IDE channel supports a master device and a slave device. These four items let you assign which kind of PIO (Programmed Input/Output) is used by IDE devices. Choose Auto to let the system auto detect which PIO mode is best, or select a PIO mode from 0-4. IDE Primary/Secondary Master/Slave UltraDMA (Auto) This mainboard supports UltraDMA technology, which provides faster access to IDE devices. If you install a device that supports UltraDMA, change the item on this list to Auto. You may have to install the UltraDMA driver supplied with this mainboard in order to use an UltraDMA device. Using BIOS 38 IDE DMA Transfer Access (Enabled) This item allows you to enabled the transfer access of the IDE DMA. Press <Esc> to return to the Integrated Peripherals page. OnChip PCI Device (Press Enter) Scroll to this item and press <Enter> to view the following screen: Phoenix-AwardBIOS CMOS Setup Utility SiS OnChip PCI Device USB Controller USB 2. 0 Supports USB Legacy Support USB Mouse Support AC97 AUDIO Serial ATA Controller Serial ATA Mode [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [IDE] Item Help Menu Level : Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults USB Controller (Enabled) Enables or disables the onboard USB controller. USB 2. 0 Supports (Enabled) This item enables or disables the onboard USB 2. 0. USB Legacy Support (Enabled) Enable this item if you plan to use a keyboard connected through the USB port in a legacy operating system (such as DOS) that does not support Plug and Play. USB Mouse Support (Enabled) Enable this item if you plan to use a mouse connected through the USB port in a legacy operating system (such as DOS) that does not support Plug and Play. AC97 AUDIO (Enabled) Enables or disables the onboard AC 97 audio function. Disable this item if you are going to install a PCI audio add-on card. Serial ATA Controller (Enabled) Enables or disables the onboard Serial ATA controller. Set this item to RAID if you are to activate the RAID function of the SATA devices. Using BIOS 39 Onboard SuperIO Device (Press Enter) Scroll to this item and press <Enter> to view the following screen: Phoenix-AwardBIOS CMOS Setup Utility SuperIO Device Onboard FDC Controller Onboard Serial Port 1 Onboard Serial Port 2 UART Mode Select UR2 Duplex Mode Onboard Parallel Port Parallel Port Mode ECP Mode Use DMA [Enabled] [3F8/IRQ4] [2F8/IRQ3] [Normal] [Half] [378/IRQ7] [ECP] [3] Item Help Menu Level : Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults Onboard FDC Controller (Enabled) This option enables the onboard floppy disk drive controller. Onboard Serial Port 1/2 (3F8/IRQ4)(2F8/IRQ3) This option is used to assign the I/O address and interrupt request (IRQ) for onboard serial port 1/2 (COM1/COM2). UART Mode Select (Normal) This field is available if the Onboard Serial Port 2 field is set to any option but Disabled. UART Mode Select enables you to select the infrared communication protocol-Normal (default), IrDA, or ASKIR. IrDA is an infrared communication protocol with a maximum baud rate up to 115. 2K bps. ASKIR is Sharp's infrared communication protocol with a maximum baud rate up to 57. 6K bps. [. . . ] SiS649 · Soporta 12 Transacciones Sobresalientes y Anfitrión Casi Sincrónico al cronometraje de DRAM (NB) · Acomoda Sis MuTIOL de Alto Rendimiento que conecta al I/O de media SiS965 MuTIOL con bus de datos de 16-bit bidireccional para realizar la ancha de banda de 1GB/s en el modo 133 MHz x 4 · Soporta Puerto de Gráficas PCI-Express X16 · Soporta DDR400/333/266 o DDR2-533/400 SDRAM · Soporta hasta 2 DIMMs DDR2-533 sin buffer o 2 DIMMs DDR400 sin buffer hasta 2 GB SiS965/965L (SB) · Servicio concurrente de todos los Dispositivos DMA: Controladores IDE Dual, controlador SATA, tres controladores anfitriones USB 1. 1 y un controlador anfitrión USB 2. 0, Controlador LAN MAC y Controlador DMA Audio/Módem MuTIOL 1G a PCI Express x1 Bridge Integrado, conforme con PCI Express 1. 0a Conforme con la espec. Conformidad de la especificación Serial ATA 1. 0, soporta hasta cuatro puertos independientes (SiS965 solamente) Conforme con AC'97 v2. 3 que soporta 8 Canales de salidas de sonido y V. 90 HSP-Modem. Controladores Anfitriones USB 2. 0/1. 1 integrados que soporta hasta ocho USB puertos · · · · · Memoria · · · Soporta DDR hasta módulo de memoria 400/333/266 MHz SDRAM Acomoda dos zócalos DIMM sin buffer DDR de 184-pin Cada ranura soporta hasta 1GB con una capacidad máxima total de 2GB Opciones de expansión La placa principla viene con las sigtes. opciones de expansión: · Una ranura PCI Express x16 · Tres ranuras conforme con 32-bit PCI · Dos conectores IDE que soporta cuatro canales IDE · Una interfaz de lector de floppy La placa principal soporta mastering de bus Ultra DMA con índices de transferencia de 133/100/66 MB/s. 1394a FireWire (optativo) · Conformidad con el Controlador Anfitrión PCI de Chip Singular para IEEE13941995 Versión 1. 0 e IEEE 1394a-2000 Multi-Language Translation Español · · · Provee dos puertos de cable con conformidad completa de 1394a en 100/200/400 Mbit por segundo Soporta suministro de cable de 3. 3V con entradas tolerantes de 5V Soprota interfaz de Bus PCI administrado a 32-bit Sonido · · · · · · · · · Conforme con el CODEC AC'97 v2. 3 Soporta CODEC de audio de 6 canales diseñaods para los sistemas multimedia Provee tres entradas en estéreo a nivel de línea análogicas con control de volumen de 5-bit: LINE-iIN CD, AUX Soporta la función de salida S/PDIF Conformidad de la especificación Azalia, que soporta 8 canales de DACs con SNR. 100dB Habilidades: 192/96/48/44. 1 KHz con 24/20/16 bits Soporta 8 puertos I/O Smart Jack Detección de clavija extensiva vía RNM (resistors network method/método de redes de resistores) que se la puede usar para monitorear el estado de conexión de cada clavija Soporte Digital S/PDIF OUT & IN Español · · · · · · · · · LAN en abordo (Optativo) Soporta operación de Autonegociación N-Way de 100/10Mb/s Capacidad Medio/Completo duplex Soporta la función Wake-On-LAN(WOL) y despertar remoto Transreceptor 10/100/1000 integrado Soporta PCI v2. 3, 32-bit, 33/66MHz Soporte total de IEEE802. 3, IEEE802. 3u y IEEE802. 3ab (Observe que solamente SiS965 soporta Giga LAN) Soporta autonegociación en 10/100Mbps Soporta operación de duplex medio/completo Conformidad IEEE 802. 3/802. 3u I/O integrado · · · · · · · La placa base tiene un conjunto completo de puertos I/O y conectores: Dos puertos PS/2 para ratón y de teclado Un puerto serie (COM1) Un puerto paralelo Cuatro puertos USB Un puerto LAN (optativo) Un puerto 1394 (optativo) Clavijas de audio para micrófono, entrada de línea y salida de línea Firmware de BIOS · · · · La placa base utiliza Award BIOS que permite a los usuarios configurar muchas funciones del sistema, incluyendo las siguientes: Administración de energía Alarmas de encendido Parámetros CPU Temporización de memoria y CPU El firmware también puede utilizarse para ajustar los parámetros para diversas velocidades del reloj del procesador. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ECS 649-M2




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ECS 649-M2 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.