User manual DUAL XNP553

[. . . ] But, this information is subject to change without notice. Safety This symbol with "CAUTION" is intended to alert the user to the presence of important instructions. Failure to heed the instructions can result in injury or unit damage. To prevent injury and damage to the unit, please read and follow the instructions in this manual. If you feel unsure about installing this system yourself, have it installed by a qualified audio technician. [. . . ] Do not connect audio outputs from your amp or receiver to the Illuminite inputs of the speakers. This WILL DAMAGE the LED bulbs and WILL void your warranty. 3 XNP - SBX SERIES INSTALLATION Lighting Hook-Up Recommendations The illuminite lighting elements of your XiN series products provide you with a unique custom touch to your vehicle. Dual's patent pending illuminite bulb system and control circuitry provides an extraordinary lighted-Hue illumination which allows great creative opportunities for the beginner and seasoned custom installer alike. The lighting features of all illuminite products require a 12 volt power source to operate. The first is labeled audio input terminals and the second is labeled illuminite lighting inputs. The inputs are clearly marked with a label positioned directly above the terminal housing. The polarity (+ and -) indicators for each set of inputs also appear on these labels. Do not connect Amplifier or any audio source to illuminite lighting inputs. More then 3V rms connected to illumination inputs can cause permanent damage to the lighting elements. Correct connection would be the positive (+) 12 volt wire to the Positive (+) illuminite Lighting input terminal and connect the Negative (-) illuminite lighting input terminal to a good chassis ground. Fig 1a Lighting Hook-Up From Rear 12 volt source Audio Input Terminals Illuminite Lighting Input Terminals Head unit Ground Notice: The IlluminiteTM series LED illumination elements are not removable. There are no serviceable parts inside or attached to the speaker assembly. Removal or tampering with any part or portion of the speaker and/or its assemblies will damage the product and void the limited warranty. Be sure that the mounting location is deep enough for the speaker to fit. Refer to the specification chart to determine the proper diameter hole to cut for your speaker model. If supplied, use the plastic mounting ring as a template to mark the locations for the mounting screws. The speaker's positive terminal is indicated with the "+" symbol. If supplied, fit the grille inside the ring and press gently, but firmly, into place and attach with screws. 5 XNP - SBX SERIES INSTALLATION Mounting Legend 6 XNP - SBX SERIES SPECIFICATIONS Notes 7 XNP - SBX SERIES WARRANTY Limited One-Year Warranty This warranty gives you specific legal rights. [. . . ] Please describe your problem in writing and include your name, a return UPS shipping address (P. O. DUAL will pay the return shipping charges if the product is returned to an address within the USA. Toll Free: 1-866-626-7863 Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the company's negligence, actual or imputed. [. . . ]