User manual DUAL XD642W

[. . . ] Activating this feature will enhance the bass and treble frequencies when listening to music at low volumes. Press and hold POWER for 3 seconds to program currently selected volume level. "P-VOL" and the current volume level will momentarily appear in the display. [. . . ] Press and hold rotaryencoder for 3 seconds to turn confirmation beep on/off. Press MUTE again to cancel. ll nn ConfirmationBeep Mute 6 XD642WOPERATION GeneralOperation Audio Press rotaryencoderto select between Volume (default), Bass, Treble, Balance & Fader. VOLUME BASS TREBLE BALANCE FADER Bass Press rotaryencoder until BAS appears Rotate encoder left/right to adjust ( -6 minimum / +6 maximum) Press rotaryencoder until TRE appears Rotate encoder left/right to adjust ( -6 minimum / +6 maximum) Press rotaryencoder until BAL appears Rotate encoder left/right to adjust (BAL L 12-BAL 00-BAL R 12) BAL 00 represents equal balance Press rotaryencoder until FAD appears Rotate encoder left/right to adjust (FAD F 12-FAD 00-FAD R 12) FAD 00 represents equal fader Individual Bass and Treble settings are retained in memory for AM, FM, CD, and AUX modes. This allows you to save the Bass and Treble settings separately for each mode. Example: FM tuner mode can have Bass +3 and Treble -1 while CD mode can have Bass +2 and Treble +2. Note: Any adjustment to the Bass or Treble settings automatically cancels the current EQ curve (if one is selected). Treble Balance Fader SourceAudioMemory 7 XD642WOPERATION TunerOperation SeekTuning ManualTuning Press TUNE or TUNE next strong station. nn nn ll momentarily to seek the ll ll Press TUNE or TUNE for more than 2 seconds, then release. Press TUNE or TUNE momentarily to move radio frequency up or down one step at a time. If tuning is not adjusted for 5 seconds, the unit will return to seek tuning mode (default). "AUTO" will momentarily appear in the display. nn ScanTuning Local/Distance Press SCAN to preview strong stations on the current band, pausing for 5 seconds at each. to select Press and hold BAND then press TUNE European frequency spacing. press TUNE Band FrequencySpacing nn ll StoringandRecalling StationPresets Up to 18 FM stations and 12 AM stations can be stored. Press and hold the desired preset button (1-6) for more than 2 seconds. The station can be recalled anytime by pressing the corresponding preset button. Press AS/PS for more than 2 seconds to automatically store the six strongest stations in the current band. Press AS/PS for less than 2 seconds to scan presets 1-6 on the current band, pausing for 5 seconds at each. Press AS/PS again to cancel. AutomaticallyStore Stations PresetScan 8 XD642WOPERATION ManualTuning DirectTuning WeatherbandTunerOperation Press TUNE nnor TUNEll momentarily to seek the next weatherband station. Press preset 1-6 or BAND to directly access the 7 weatherband stations. Refer to the table below. WeatherbandStations-DirectTuningTable Button Preset 1 Preset 2 Preset 3 Preset 4 Preset 5 Preset 6 BAND WBFrequency 162. 400 MHz 162. 425 MHz 162. 450 MHz 162. 475 MHz 162. 500 MHz 162. 525 MHz 162. 550 MHz LCDDisplay WB 162. 400 WB 162. 425 WB 162. 450 WB 162. 475 WB 162. 500 WB 162. 525 WB 162. 550 9 XD642WOPERATION CDPlayerOperation InsertCD EjectCD With the label facing up, insert a standard size CD into the CD slot. The unit will change to previous mode of operation (AM, FM, or auxiliary input). If the disc is not removed within 10 seconds, the unit will reload the disc. [. . . ] Whatiscovered?This warranty covers all defects in material and workmanship in this product. The following are not covered: installation/removal costs, damage resulting from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unauthorized repair or failure to follow instructions supplied with the product, or damage occurring during return shipment of the product. Before you call for service, check the troubleshooting guide in your owner's manual. [. . . ]