User manual DEI VC2010 Installation Guide

[. . . ] Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights and you may also have other rights that vary from State to State. DIRECTED does not and has not authorized any person or entity to create for it any other obligation, promise, duty or obligation in connection with these UNITS. Date of Purchase Your Full name and address Authorized dealer's company name and address Type of unit installed Year, make, model, and color of the automobile Automobile license number Vehicle Identification number Installation receipts All components other than the unit, including and without limitation the remote control, cables and installation accessories, carry a 60-day warranty from the date of purchase of the same. This warranty is automatically void if the unit's date code or serial number is defaced, missing or altered; the unit has been modified or used in a manner contrary to its intended purpose; or the unit has been damaged by accident, unreasonable use, neglect, improper service, installation or other causes not arising out of defects in materials or construction. [. . . ] Changes or modifications not expressly YOUR WARRANTY Your warranty registration must be completely filled out and returned within 10 days of purchase. Your product warranty will not be validated if your warranty registration is not returned. It is also necessary to keep your proof of purchase, which reflects that the product was installed by an authorized dealer. approved by the party responsible for compliance could void the user's authority to operate this device. 4 © 2001 Directed Electronics, Inc. Table of Contents Warranty . . 2 . 3 . 3 . 4 . 4 . 4 . 6 . 6 . 6 . 7 . 7 . 8 . 9 . 9 . 10 . 10 . 10 . 11 . 11 . 12 . 12 . 12 . 12 . 12 . 12 . 12 . 13 . 13 . 13 . 13 . 13 . 14 . 15 © 2001 Directed Electronics, Inc. 5 Features FEATURES I I I I I I ACCESSORIES I I I I I I I I I I Hi-Fi stereo. DLC (Diamond Like Carbon) Head - special alloy reduces head wear and increases durability. Remote Ejection - tape can be ejected using the remote control. VCR. AUDIO IN - Connects to a second VCR or an audio source to record audio. DC (+) 12 VOLT INPUT - To provide power for the VCR, connect the small plug end of the power harness on the back of the VCR. BLACK: This wire connects to a good factory ground wire or a metal part of the chassis. RED: 7. REMOTE SENSOR INPUT - The optional remote infrared (IR) sensor eye allows you to access all the features on the remote control when the VCR is mounted in another location away from the remote. To install the remote IR sensor, simply plug it into the input next to the power plug. Run the sensor cable to the front of the vehicle and mount the sensor in a convenient location so that the remote control can be easily pointed toward the remote sensor eye. Note: Route the wires so they can not be pinched, punctured, or chaffed against bare metal. Always fuse appropriately at the source. 8 © 2001 Directed Electronics, Inc. Remote Control Always aim the remote control directly at the VCR or the remote sensor eye. EJECT Ejects the tape. STILL(Pause)/SLOW Selects still frame or variable slow motion playback. Battery Compartment (on back) REC MENU ENTER DISPLAY TRK SHIFT IISTILL/SLOW Remote Control Battery Install/Replace 1. Slide battery compartment cover back in. © 2001 Directed Electronics, Inc. 9 Playing a Tape 1. If the tape doesn't have a safety tab, VCR will playback automatically. When playback starts, the VCR automatically adjusts the tracking for clear picture and sound. Videocassettes recorded on other VCRs and videocassettes with copy protection may require some manual adjustment. To adjust manually, press CH/TRK up or down as necessary until the best picture possible is achieved. NOTE: Picture distortion often occurs at the beginning of a tape. If manual tracking adjustments do not produce a clear picture, there may be a problem with the videotape. 5. MANUAL TRACKING For best picture quality, the VCR video head must be aligned with the recorded track on the tape; this alignment is called tracking. Recording 1. Press the MENU button on the remote control to access the on-screen menu. [. . . ] If the problem occurs on more than one tape, try using a video head cleaner cassette. If the problem occurs on more than one tape, try using a video head cleaner cassette. No TV picture. Streaks (noise) on a taped program. I I I I I I Streaks (noise) or jitter with the VCR in Still mode. The VCR motor continues to run after STOP is pressed. Press TRK up or down to adjust the picture. I I Check if the VCR is in Still mode. [. . . ]