User manual DEI OHD900 Owners Guide

[. . . ] OWNER'S GUIDE INSTALLATION GUIDE 9" (16:9) Widescreen Overhead Video Monitor MODEL OHD 900 © 2004 Directed Electronics, Inc. N82900 08-04 NON-TRANSFERABLE LIMITED CONSUMER WARRANTY Directed Electronics, Inc. (Directed) promises to the original purchaser that the automotive video monitor and/or source unit(s) (the Product), excluding accessories, purchased and installed from a Directed authorized dealer within the ninety (90) days after purchase of the new vehicle, in which the Product is installed, is free from defects in materials or workmanship under normal use and conditions for a period of three (3) years from date of purchase or the first 36, 000 miles as registered on the new vehicle's odometer reading at time of delivery of the Product for warranty service, whichever occurs first. Product purchased or installed more than ninety (90) days after the new vehicle is purchased are warranted for a period of one (1) year from date of purchase of the Product. [. . . ] To avoid accidents, prevent children from playing with the battery. Operation OPEN--LCD SCREEN To open the LCD screen press the OPEN/CLOSE button and carefully rotate the LCD screen down to its operating position. CLOSE--LCD SCREEN To close the LCD screen rotate the LCD screen up to its stored position until you hear the OPEN/CLOSE button click. 12 © 2004 Directed Electronics, Inc. LOADING AND UNLOADING DISCS You can use single side and dual layer DVDs, VCDs, CD-audio and CD-R compatible 12cm discs with this system. LOADING DISC 1. With double-sided discs, load with the side you want to watch facing up. Ensure that the disc is seated properly before pushing the tray back into its locking position. Push to close the door, until you hear a click sound from the door mechanism. SIGNAL SOURCE SELECTION Select the input signal for viewing (AV1, AV2, or DVD) by momentarily pressing the MODE button ( ) on the LCD screen or the MODE button on the remote. © 2004 Directed Electronics, Inc. 13 ON/OFF CONTROL Press and hold the ( ) button on the LCD screen or momentarily press the POWER button ( )on the remote. FUNCTION MODE (MENU) Press the MENU button ( ) on the LCD screen or the VIDEO MENU button on the remote to display the following setup options: COLOR BRIGHTNESS DIMMER (on/off) FORMAT (full, normal, and zoom) RESET (restore factory default settings) Use the MENU button ( ) on the LCD screen or use the VIDEO MENU button on the remote to scroll through the menu options. Once the desired setting is selected use the UP/DOWN ( / ) buttons on the LCD screen or the MONITOR ( / ) buttons on the remote to change the setting. After 5-seconds of inactivity the MENU screen will turn off. DOOR LIGHT ON/OFF Press this switch on the LCD screen to have the door open sensor operate the dome lights. NOTE: This feature is operational only if the Gray or Purple door lock trigger wires have been connected to the door sensor. The dome light selector switch contains two separate circuits. One for a positive dome light trigger and one for a negative dome light trigger. Please refer to the wiring table below for each of these triggers. NEGATIVE DOME LIGHT TRIGGER WIRE COLOR Gray Blue Orange Purple CONNECTION Battery ground Battery +12VDC Battery +12VDC Negative door trigger 14 © 2004 Directed Electronics, Inc. POSITIVE DOME LIGHT TRIGGER WIRE COLOR Gray Blue Orange Purple CONNECTION Battery +12VDC Battery ground Battery ground Positive door trigger COURTESY LIGHT ON/OFF Press the Courtesy light switch ( light. Press the on/off power button on the front control panel, or press the button on the remote control to switch on the unit 2. Momentarily press the on/off power button on the front control panel, or press the button on the remote control repeatedly until DVD mode is displayed. --- If the DVD does not come with a Menu/Title, the play will continue. --- If the DVD comes with Menu/Title, Menu Options will be shown on the screen. R UD --- Press the Left/Right/Up/Down ( / / / ) buttons above the LCD screen, to select the chapter or topic for playing, then press the ENT button to begin play. OR R UD --- Press the Left/Right/Up/Down ( / / / ) buttons on the remote control, to select the chapter for playing, press the Enter () button on the remote to begin play. --- If the message "NO DISC" is displayed on the screen, check the format of the disc being used and ensure that the disc is being loaded with the label facing you (see illustration above). --- If the message "WRONG REGION" is display on the screen, it means the player does not support the regional code for that DVD. © 2004 Directed Electronics, Inc. 15 AUDIO CD PLAYBACK 1. Press the on/off power button on the front control panel, or press the button on the remote control to switch on the unit 2. Momentarily press the on/off power button on the front control panel, or press the button on the remote control repeatedly until DVD mode is displayed. Press the PLAY/PAUSE button ( ) on either the panel above the LCD screen or on the remote to start playing. FAST-FORWARD (DVD/MP3/CD) 1. For DVDs and MP3s, the LCD screen will display FF XX (FastForward Speed), and will increment up to a maximum of 8X fast forward (2X, 4X, 6X, 8X) and then to normal play speed. For CDs, the LCD screen will display FF XX (Fast-Forward Speed), and will increment up to a maximum of 4X fast forward (1X, 2X, 3X, 4X) and then to normal play speed. For DVDs, MP3s and CDs press play/pause ( / ) from any fast forward speed to resume normal play speed. POWER MONITOR MODE SETUP DISPLAY VIDEO MENU LEFT UP RIGHT TITLE ENTER PREV DOWN NEXT MENU F. REV PLAY/ PAUSE F. FWD STOP F. Fwd SUBTITLE AUDIO MUTE REPEAT 1/ALL 1 2 3 4 5 6 7 GOTO 8 ANGLE 9 0 FAST-REVERSE (DVD/MP3/CD) 1. [. . . ] VIDEO OUTPUT (not used) © 2004 Directed Electronics, Inc. 21 SPEAKER SETUP 1. Unit is shipped with a factory default of "1234. " Select CHANGE R Use the Left/Right ( / ) button on the remote control, select CHANGE and press the ENTER button. The unit will ask you for the old password, an entry of the new password, and confirmation of the new password. DEFAULTS NOTE: This does not restore the password to the default password (1234). RESET © 2004 Directed Electronics, Inc. CHINESE JAPANESE 5. [. . . ]